Reviews
Stainless SteelBrake hose
Purchased to make Brake hose "h" shaped.
Touch was tight and very nice.
[Color] Smoke coated, so I thought it would be less likely to deteriorate.
View detail
Sufficient if appearance is important.
The aluminum part is not so durable, but if you want durability, why not choose Stainless Steel? View detail
Fits: YAMAHA XG250 TRICKER
Brakes work better.
We replaced the OEM brake hose with this product. The work itself was relatively easy, since all we had to do was to replace the brake fluid by turning the brake hose.
The effect goes from the OEM's squishy Brake feel to a Snap effect.
I was generally satisfied with the product because it was inexpensive and effective.
View detail
Brake hose
Because the dimensions of the product were not written, it was written for Eliminator 400se but did not meet.
Please fill in dimensions, OEM Product No., etc. I bought the wrong product.
View detail
no problem
No problems, it's nice to have a detailed hose length to choose from. View detail
Brake hose
In the picture of the purchased item, Quantity:It shows 2 pcs, but when I received it, only 1 pc was included.
Please indicate what the enclosed product contains in the product introduction section.
View detail
Purchased for XELVIS
I purchased and replaced the "for Front" and "for Rear" together.
No way, it's a replacement from a 30 year old OEM.
I think both for Front and for Rear are a little bit longer than the other, I think it means that Front is compatible with HandlebarUp, but for Rear, it was a little bit difficult to handle.
Also, in order to attach to the OEM's fixture, the rubber protector wrapped around the OEM's hose must be present or it will be loose. The rubber protector was cut open with a cutter and reused.
It's a mesh hose, but it's not a mesh hose. "Snap" The ring is very easy to handle. It is very easy to handle.
However, the amount of BrakeStroke required will be shorter, so it would be good to be able to adjust Lever for Front and Brake switch for Rear.
Air removal is a practice to learn to be mindless.
View detail
Fits: YAMAHA XG250 TRICKER
Brake hose
Cost performance is by far superior. No performance issues! View detail
Snap and it works.
It is clearly different from the OEMHose. View detail
Recommended for changing brake hose
There are some swage products that are more expensive, but I bought them because the quality of ac products is excellent compared to the price. You can also choose a color that suits your taste. It doesn't look much different from swage in appearance. View detail
Good price, high quality
There are some swage products that are more expensive, but I bought them because the quality of ac products is excellent compared to the price. You can also choose a color that suits your taste. It doesn't look much different from swage in appearance. View detail
No problem at all.
Bolt is Material when installed:Aluminum, so it is recommended to work carefully.
Torque can be applied without any problems, and BrakeTouch is now Snap after replacing the OEMHose. 。
Durability is often a concern, but I ride only occasionally as a hobby, so I don't worry about it at all. (Lol)
I think it is cost-effective, so if there is someone who is worried about Stainless Steel, I think this is a good choice for them. (^^)
Personally [Color] Smoke color is recommended.
View detail
ACPerformance line
I bought this product because I purchased a motorcycle with rubber hose for the rear. I think it is good because I bought this product for my previous Motorcycle and I can be sure that it is safe. I am satisfied with it because it is a little cheaper than other products and the quality is good. View detail
Casual Accent
In order to convert the front brake of the GORILLA to disc, the oil line from Master Cylinder to Caliper was changed to this hose. The other clutch and throttle wires are black, so the brake hose is also black. The gold alumite at the base is a nice touch. The length of the hose is very simple. The instructions on the back of the box were written so I could assemble it by myself. View detail
Fits: KAWASAKI Z125 Pro
Excellent sensation after the skirting sound on Front.
Control in the limit range is good after the skirting sound on the Front.
This is especially obvious when re-gripping after Release.
Specifically, when the road surface at the BreakingPoint before the Corner is rough or wet.
You will be surprised at how well Linear works.
View detail
Cospa is good
[How is it used?
TZr250R (3XV) The brake line was also renewed along with the change to Brembo calipers for the rear brake.
I chose this product because I felt comfortable with Active handling and it was inexpensive.
Was the one you received as per Image?
The quality of the product looks good.
Instruction Manual and notes were included to help with installation.
Was the installation difficult?
I had a lot of trouble deciding on the installation, or rather the length.
The distance was longer due to the installation of an external caliper support with the installation of a Brembo caliper, so I checked it many times with MAJOR.
We chose 635mm because we didn't want to be short, but as you can see in the photo, there is a little extra.
Also, tightening the Socket is easy as a 13mm Spanner is all that is needed.
How was your experience with it?
At any rate, the Fluid is working fine with no leaks or other problems.
I didn't do much research before I bought it, so I regretted it a little when I found out later that I could choose the Socket color. (Lol)
[Included Parts:were they on?
Naturally, since it is a HoseSingle Body, it is necessary to prepare a banjo bolt or Adapter separately.
It is easy to select Active's products as they are also listed as compatible or not.
[Was there anything that disappointed you?
The instructions call for the application of Molybdenum grease, which I did not have, so I had to go to Home center to buy some.
I really only use it for a little bit, so I wish it had come with a small one.
【Review】
It is a good replacement part for old cars with affordable Brake line change.
It would be nice if the length could be specified in more detail, but....
Also, please remember to bring Molybdenum grease.
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100 RS
It looks nice.
Since it is a mesh hose, the feel of holding the Brake lever is Snap, but above all, it should be a bright color that does not stand out too much.
I chose this product because I didn't want to wear it.
View detail
Costa good!
The price is very reasonable for a black mesh hose. The Swage line I used to use is a few steps better in quality, but there is no Drill if you can find an expensive one. View detail
Fits: KAWASAKI ZrX1200ZrX1200 DAEG
GPX750R
In terms of performance, it is probably not LARGE different from other products. I am satisfied with the product because it is the color scheme I wanted, and when I actually installed it, it was just like the Image. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
Self-satisfaction with emphasis on appearance
If you don't change the handlebar area, you can just pop it on!
The appearance has gone up a top ranking.
If Rear is replaced at the same time, the Custom feeling will be improved.
Recommendation for simultaneous front and rear replacement
View detail