Reviews
It looks good and is functional.
[How is it used?
After purchasing a WR250R, I saw that a friend of mine who owned the same vehicle had installed this product on his vehicle and I thought, "Parenthesis! I was so curious that I bought this product.
Was the one you received as per Image?
At the time, I was aiming for a slow stroll through the Flat Forest Road. Off car-like parts. I had a certain admiration for OkaSurfer. Not come along Oka OffLoader. It was in a state of disrepair, so I just installed this product. It's kind of like an Off car." In fact, when I started playing in the mountains, I found that the mud around the DriveSprocket was much easier to remove than that of the OEM Product Cover.
Was the installation difficult?
It is a simple job to remove the NORMAL Sprocket Cover and install it by aligning it with the Screw hole, so even beginners can easily work on it.
How was your experience with it?
As mentioned above, mud on the Chain tends to accumulate around the DriveSprocket when playing on sloppy forest roads after rain.
The NORMAL cover has a low mud removal performance, so mud accumulates rapidly, and cleaning it after returning home is a large and strange task. It looks good (depending on your personal preference)! Functional!" This is a gratifying product of
[Included Parts:were they on?
The CoverBody, bolt and collar for installation are included, and can be replaced with this product alone without additional purchase of other products.
[Was there anything that disappointed you?
No, there are three color variations to choose from.
Other items that would be helpful
Point and hang of installation
There is nothing special about it, and if it is properly installed in the right place with the right bolt, it is large and sturdy.
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual...well, I think people who buy this product know what they are going to use it for, so I don't think it's a problem.
[Notes]
Inner parts of OEM Sprocket Cover are used, so please do not throw away, sell, or lose them.
[ITEMS TO BUY TOGETHER
There is nothing in particular, but if you consider color coordination including custom parts in Others, I think it will give a sense of unity and make the parenthesis even better.
[Opinions and requests to Manufacturer
Please continue to develop Variation at affordable prices.
View detail
It is easy to install. It also looks good!
The installation itself is very easy.
Simply remove and detach the three 8mm Bolt.
An instruction manual is included, and three brand-new bolts are also included, making it a good value.
I think it would be a good idea to put it on anyway, as it looks good and improves maintenance.
View detail
Cover
BonsaiParts. 。 Easy to install View detail
Fits: HONDA CR250R, HONDA CRF250R, HONDA CRF250X, HONDA CRF450R, YAMAHA YZ125, YAMAHA YZ125X
Expensive, but great product
I would give this thing 5 stars, but I think it is too expensive. I really wanted a case saver with a cover though and this was my only option. Part looks great and is well made. No regrets, despite the high price.Ordered this product to get rid of the factory cover that held mud and other debris inside, and to be able to easily inspect my front sprocket. The biggest benefit is keeping the mud from building up as compared to the stock cover that comes on the bike.Just the ease of maintenance/ inspection is a good reason to buy.On the other hand, totally cleans up the look at the bike.Easy to installation. View detail
Mud clogging is difficult to avoid! Washing the car is also hassle-free!
*Motivation to purchase
0 When practice runs are made when the road surface is wet, such as after rain, weeds/mud accumulate in the Drive sprocket cover and wash the car after the run, [removal→cleaning→assembly I thought it would be possible to solve this problem by simply washing the car with high pressure every time without removing it, in order to reduce the time and effort required when washing the car.
The reason for this is that we wanted to make it look Refreshing and Simple.
Installation
0Please be careful not to dispose of the OEM drive cover parts as they will be used.
The Bolt is removed and replaced with OEM parts.
*Appearance after installation
0It looks like it's Refreshing for now. It seems to be able to quickly drain mud and weeds that may be clogging it.
It has been Anodized Treatment of 0Blue, "ZETA. Logo is also Clearly visible.
*Feelings after use
zIt is now possible to discharge weeds by hand after or during actual driving after rainfall, even if they become entangled.
0When washing the car, weeds that can be removed by hand are removed, and the subsequent high-pressure washing makes cleaning much easier than with the OEMDrive cover.
0In addition to the ease of washing the car, mud, weeds, and tangles were reduced during actual driving.
0It seems that the amount of ejection increased on its own while running, and the end of the run also felt Refreshing.
0We were not aware of it at all, but now that the Driven Sprocket is visible, we are able to check for wear and deformation more frequently. Thanks to this, I realized that I needed to replace it early due to wear, even though I had no intention of replacing it.
View detail
It looks nice.
Better looking than OEM.
When the dirt on the Oil becomes noticeable, we will wash it.
View detail
Parenthesis OK
It was troublesome to remove the front Sprocket Cover and clean it every time when doing maintenance on the CRF.
So, I bought this Cover to improve the maintenance performance and parenthesis.
Simple cleaning is easier than before.
I was concerned about that because it is quite bare, but there was no problem at all.
View detail
Serviceability and the Dress-up Effect
I check it often because if this part is dirty, the whole Chain gets dirty, but it is a hassle to remove it every time, so I decided to use this one.
It looked great and was a quick decision.
So far, only the dirt brought by Chain has been on the OEM Covers, but that is my only concern as Garbage from the outside is likely to get in.
View detail
Small stone clogging improvement
I had stopped many times in the past to check for abnormal noises near the Front, but I couldn't figure it out and as a result, it was caused by a Small stone stuck in the OEM Cover.
This time I don't get any Small stones and the mud clogging has been improved. It looks cool, but the price is a bit high.
View detail
With a pon.
I bought this to improve maintenance as the nut on the DriveSprocket tends to loosen easily.
I used to have to take the cover off, but now I can easily check it visually and by hand.
View detail
Fits: YAMAHA WR250F, YAMAHA WR450F, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA YZ450F, YAMAHA YZ450FX
Required for Muddy driving.
I have installed it on almost every vehicle I have ever owned.
The OEM Subroquet Cover has poor mud drainage, and when muddy, the chain can become so tightly packed with mud, stones, tree branches, and other stuff that it becomes impossible to push or pull, let alone drive.
I was afraid of that, so I stretched the Chain loosely, and this time the Chain came off and almost broke the Crankcase. (NeutralSensor was damaged.)
It looks like Bonsai Custom, but I think it is surprisingly Large thing Parts.
There will be more clearance than the OEMCover, so even if you're not a Muddy, it will be easier to wash your car on a regular basis.
Also, the Anodized is well made and is located at the bottom of the vehicle Left Side where it is less likely to face sunlight, so there is not much fading even though I have been using it for almost 10 years.
The Chromium Plating on the Mounting Bolt will peel and rust where the tool hits it, but it will come right back if you polish it.
The OEMCover's plus ticky look will also be greatly improved, so it's Recommendation.
View detail
MOTARD, I know you're persistent about Motocross, but it's a zeta?
I chose these for my 2012 crf250l to run on the Motocross course. I installed this to improve the front sprocket's soil drainage so that I can run faster on my impotent motorcycle. As an unexpected effect, the maintenance of the FrontSprocket has been improved as I can see the wear and tear on the teeth. View detail
It looks great
Installed on WR250R
The performance remains the same, but it's noticeable and AnodizedBlue makes it more satisfying
It's easy to install and remove, and it's easy to check the wear of the Sprocket
ZETA's Anodized is fading fast, but it's been two years since it was installed, perhaps because of where it was installed But the color has faded? That's about it
I don't run GunGunOff-road, but it's a very satisfying replacement product
View detail
Fits: KAWASAKI D-TRACKER, KAWASAKI KLX250, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KLX300R, SUZUKI 250SB
Parenthesis OK
Crack cracking of the OEM Drive cover's bolt hole part also occurred, so Dress-up I really wish I'd had the Blue one, but the Silver texture is pretty good too! It is I can't say what I did to the car because it hasn't been driven in yet, but I can say that the OEMCover There are a lot of bare parts, so I'm curious to see how much Chain lube bounces around Anyway, I am satisfied with the design and texture The installation is in no time with two bolts If the price is a little cheaper, it is a perfect score View detail
Good quality & looks awesome!
Item is very easy to install, just remove the old sprocket cover & bolt on the Zeta cover. Zeta quality is awesome & looks cool with the open sprocket cover!! View detail
This is my favorite for WR.
I use it with WR 250 R. Regardless of the OEM, it is different from other companies' products, so it will stop two points so it's only a mud clogging different.
And Color - do not fall, it's the best.
OEM parts (Plate under OEMCover) Part of it is necessary, so cars who are fiddling from the beginning like me need attention.
In my case there is no OEM Plate so we added Color to that extent and responded (Lol)
I also have Bolt for filling in the unnecessary part at one point of three points closing, and I will do it recently ZETA
It may not be ZETA who is an old Anodized immediately (I'm sorry if it's too rude)
View detail
Awesome red!
Wanted to change the ugly plastic stock drive cover that came with the bike so i decided with the red Zeta drive cover to compliment the other parts. I was very happy with the item. Very high quality. Definitely not 'toy' looking. The red color is chrome red. The silver accent is amazing. Item comes with all the parts needed but you will still need to reuse the old drive cover steel plate. View detail
It's beautiful Red
Normal sprocket cover interfered the other day when I installed the Frame guard, so I was pressed for necessity but I am satisfied that the coloring was also beautiful and the texture was unexpected.
Oh, one more bonsai has advanced. (Lol)
View detail
The texture has changed Large!
OEM 's Drive cover looks sticky and Material : It seems crappy for Plastic. Also, after running on the unpaved road, when the mud gathered inside the Drive cover, I had to remove Cover from time to time, but after swapping to the Zeta Drive cover, cleaning it even without removing Cover at the time of cleaning You can also do Titanium color, texture is good, appearance is neat, Parenthesis has improved. View detail
It is convenient for cleaning.
I see someone who is using NORMAL's DriveSprocket cover, but this Zeta's Drive carbar is very slim, it's easy to clean this as it's easy to clean with this installed.
View detail