Reviews
Rust resistant, beautiful Silver
Rustor bolt rust in Restore and exchange.
If your feet are beautiful, you will see it shrinking as a whole.
However, if you tighten a little more than the prescribed Torque, it will likely be licking.
Screw lock so it will not be a problem if you tighten with the prescribed Torque.
Although the price is a little expensive, I think whether to replace it after about 2 times use.
View detail
Is beautiful
Various for Stainless Steel etc. There is a grade and it is not known how much this is the material, but if you tighten it with the prescribed Torque's 23 Nm, the Screw hole never collapsed.
Polished and it is beautiful.
By the way, Stainless Steel is not a material that does not rust, it is a rust resistant Material so it will be damaged if it remains dirty.
View detail
Disc Lock It was changed together at the time of exchange
Some people recycle the previous Bolt as it is, but I think that it is better to maintain precision instead of a new one for safety. Of course I also painted Screw lock. View detail
Exchange is recommended in several times!
MONKEY's Bolt licked so I exchanged.
OEM (NSR50) SteelBolt is very soft,
By tightening with Torque prescribed, the part of Hexagonal becomes loose in several times.
But even if I used it without exchange, I had licked it perfectly.
For Stainless Steel I thought that Large would be tough,
It will become somewhat loose if you tighten with Torque prescribed about 3 times.
MONKEY (Diversion of NSR 50) When repairing Front such as Tire exchange and Pad exchange,
If you do not remove Rotor Caliper - Wheel can not be removed.
At the beginning Quantity : 1 Set of 4pcs. Although I bought it, since I ran out of it frequently when I customized it,
Daring 10 pcs. I bought a set.
Stainless Steel But because it is not hard,
Have some spares and early exchange is the Recommendation.
Three highs for material for less than expected + __.
View detail
It has ridden on XZR250 and a Manufacturer original manufacturer's product is in a missing item state. Although he was worried whether it can equip in external article, it stuck satisfactorily. Since it is a Stainless bolt further, there must be
It has ridden on XZR250 and a Manufacturer original manufacturer's product is in a missing item state.
Although he was worried whether it can equip in
external article, it stuck satisfactorily.
Since it is a Stainless bolt further, there must be durability more than an original manufacturer's product.
View detail
[Webike Monitor] Since the attachment Bolt of the Rotor rusted and even the DISC was dirty, the product made from a Stainless was used at the time of reapplying a Wheel. although appearance is good, the hole of the hexagon head which inserts a to
[Webike Monitor] Since the attachment Bolt of the
Rotor rusted and even the DISC was dirty, the product made from a Stainless was used at the time of reapplying a Wheel.
although
appearance is good, the hole of the hexagon head which inserts a tool is pure -- since it is shallower, shortly after applying a Torque, a deep pool will rise.
It is better to prepare the
Torque wrench and a screw-thread Locke agent.
since specification for which
re-use is improper is carried out to the Package -- two or more times -- attaching -- removing -- special attention is required.
View detail
[Webike Monitor] It is Type 2 Bandit1200 It was used for 06. Since that was likely to become regretting even if the DISC with sufficient appearance was attached with much trouble, since appearance was not quite satisfactory, a pure Bolt is purch
[Webike Monitor] It is
Type 2 Bandit1200 It was used for 06.
Since that was likely to become regretting even if the DISC with sufficient appearance was attached with much trouble, since appearance was not quite satisfactory, a pure Bolt is purchased.
Although it is small parts, it is different more than it considered.
Safe, since it is the
STAINLESS STEEL and does not rust.
What was necessary was just to have used from the time of a
pure DISC.
View detail
[Webike Monitor] Since the Brake disc was made external, Rotor bolts were exchanged. Since it is a life-threatening part, Coco is certainly a new article. Although it is comparison photograph, they are [ upper 1 ] purity and the Stainless l
[Webike Monitor] Since the
Brake disc was made external, Rotor bolts were exchanged.
Since it is a life-threatening part, Coco is certainly a new article.
Although it is
comparison photograph, they are [ upper 1 ] purity and the Stainless lower 2 purchased.
Brightness is different and rust will not come out mostly, either.
View detail
The Bolt of a Disk rotor be elaborate!! It will not rust pure.
The Bolt of a Disk rotor be elaborate!!
It will not rust pure.
View detail
It combined with the Front disk rotor of TMax500, and exchanged. Probably, there was also no Trouble, since it exchanged without saying anything, although exchange was requested from Schopp by part carrying in. The touch which rode does not feel a diffe
It combined with the Front disk rotor of TMax500, and exchanged. Probably, there was also no Trouble, since it exchanged without saying anything, although exchange was requested from Schopp by part carrying in. The touch which rode does not feel a difference compared with before, either. I think recommendation with considering a price. I think that a Manufacturer should just also equip with a Stainless bolt from the beginning. View detail
In exchanging Disk rotor bolts, although the thing made from a Titanium was considered, it did not reach in a cost aspect, but I purchased the goods here. - which does not rust by the STAINLESS STEEL -- it purchases, the torque value is also indicate
In exchanging Disk rotor bolts, although the thing made from a Titanium was considered, it did not reach in a cost aspect, but I purchased the goods here.
- which does not rust by the
STAINLESS STEEL -- it purchases, the torque value is also indicated firmly and I thought kana good for
KSR2.
Unlike made in
Steel, the soft impression was felt.
View detail
Since it is the same Size as a pure Bolt, it exchanges without using especially mind. It is wearing after cleaning, since the Screw-lock agent remains in the Wheel side when a pure Bolt is removed. Compared with the pure Bolt, play had [ wheth
Since it is the same Size as a pure Bolt, it exchanges without using especially mind.
It is wearing after cleaning, since the Screw-lock agent remains in the Wheel side when a pure Bolt is removed.
Compared with the pure Bolt, play had [ whether it is
solid difference and ] a width across flat of the head a little.
View detail
Since this was [ grade ] also rusty once, the surface purchased the Bolt of Saki who exchanges drastically. Since attachment is exchange of a Screw, it is an instant. Since it does not change so much that it is pure although the price is a produ
Since this was [ grade ] also rusty once, the surface purchased the Bolt of Saki who exchanges drastically.
Since
attachment is exchange of a Screw, it is an instant.
Since it does not change so much that it is pure although the
price is a product made from a STAINLESS STEEL, isn't COSPAR that which is said?
Since a Rotor thinks (?) which has stopped with six Bolts in many cases, may not 6 Sets and 12 Sets however, be?
The Front wheel is changed into the thing of CBR250 although a vehicle type is incidentally VT250F.
View detail
"Around the front of GSX250S Katana was diverted from the impulse, and since there was an opportunity to decompose, the ""suzuki type 3"" 10 set was purchased and exchanged. The genuine rotor bolt was soft and clearance with a hexagon wrench is large, so
"Around the front of GSX250S Katana was diverted from the impulse, and since there was an opportunity to decompose, the ""suzuki type 3"" 10 set was purchased and exchanged. The genuine rotor bolt was soft and clearance with a hexagon wrench is large, so all ten was damaged at the time of decomposition. When the product arrived and being compared with a genuine bolt (photograph), I feel relieved with an identical size mostly. The hexagon wrench also suited and it has attached it satisfactorily. Although it ran about 300 km, it is satisfactory at all. Since texture does not rust easily well, either, I would like to use it for another vehicles from now on, although it is not conspicuous parts. It is very satisfying product." View detail
It was used for fixation of F/R rotor of Ninja250R. Various problems which come from the features of the softness of a stainless, electric potential difference with a parent metal, etc. Althought I thought that it is bad that heat should have reached easi
It was used for fixation of F/R rotor of Ninja250R. Various problems which come from the features of the softness of a stainless, electric potential difference with a parent metal, etc. Althought I thought that it is bad that heat should have reached easily intrinsically and there should have been something, it is not sold as a general general-purpose bolt, and is sold as only for a brake rotor, and I do not run seriously usually, either, and since oxidization of a genuine bolt exposure part is severer than I thought, so that tried as a fashion-parts feeling without a heavy prejudice. There was no trouble which comes from a geometrical thing that others mentioned, and modeling whose edge was a little effective was also added, and the genuine twist also became a good appearance and I'm satisfied. However, it is not conspicuous at all. Probably, there may be those who have the image that the stainless does not rust easily, but the check of a bundle and abnormalities, etc. should be done more than genuine after exchange regularly. View detail
It is a stainless type disk rotor bolt. Since a genuine was plating and got old, and it has licked the hexagon-head position when fastening, I bought Kitaco's stainless bolt this time. Since around a brake rotor is an important position, it is often seen
It is a stainless type disk rotor bolt. Since a genuine was plating and got old, and it has licked the hexagon-head position when fastening, I bought Kitaco's stainless bolt this time. Since around a brake rotor is an important position, it is often seen when such as maintenance and check. I want it to be cosy and beautiful. I think that Kitaco's bolt is good. It is unable to use a general-purpose product, since it is a special shape bolt, and to shave a stainless in this way is difficult. It is a reasonable price with 2,000yen in five. Since the lightness of titanium is expensive although I want, I'm satisfied with the stainless now. It is only because 4 stars of evaluation has a titanium bolt in a high order with a degree of satisfaction. View detail
Why does an authentic positive one rust? Stainless of the same size as this product being pure!! A fear of already rusting is not needed. Since it is called reinforcement or is sticky from iron, if you would like to deal with rust of the bolt of the r
Why does an authentic positive one rust? Stainless of the same size as this product being pure!! A fear of already rusting is not needed.
Since it is called reinforcement or is sticky from iron, if you would like to deal with rust of the bolt of the rotor which is not not at all (is it natural?) even if it fastens by 23 N-m of regulation torque, be absorbed with no problem.
It is super-recommendation.
View detail
Although the rotor bolt rusted and he thought whether to exchange that it is pure, it discovers by convenience parts by chance. It is very helpful to be prepared by - and SUS to such sizes. If itchy, it is also continued to expect sale of the comp
Although the rotor bolt rusted and he thought whether to exchange that it is pure, it discovers by convenience parts by chance.
It is very helpful to be prepared by - and SUS to such sizes.
If itchy, it is also continued to expect sale of the components which reach things.
View detail
It was used at the time of exchange of the front brake rotor of the address V125. Since the bolt used once cannot be re-used, cautions are required. Since it is a stainless, it is hard to rust. however, those who do not use when an attaching p
It was used at the time of exchange of the front brake rotor of the address V125.
Since the bolt used once cannot be re-used, cautions are required.
Since it is a stainless, it is hard to rust.
however, those who do not use when an attaching part is aluminum -- certainly.
View detail