Reviews
Good fit
I like LEAD's Helmet because of its high cost performance.
I think the size is a little loose, but it holds up well.
Opening and closing the chin guard requires a lot of force. sun visor did not interfere with Glasses.
The cap is Large size and a bit heavy, but it's a System helmet so it's probably TradeOff.
The ventilation area is very elaborate with Qu-Rear Parts, red stitches, and other small details.
It will be useful for rehydration etc. in summer.
View detail
The weight is not so heavy.
It doesn't feel as heavy as I thought it would be; the Chin guard is heavy and difficult to move up and down with one hand; the lock feels hard to engage. Inner Visor works and feels comfortable.
This is my first System helmet, but I don't feel the need for a System helmet yet, regardless of this product. In my case, I think I'll be fine with full face. Maybe I will be able to feel the benefits when it gets hotter.
View detail
PCX160 8BK-KF47 To Quantity:2pc. SetHelmet in
P.S
Helmet in front is OK with Shield, Helmet in back is upside down, not horizontal but slightly slanted
Put it down, Shield has to be removed, but the current latest PCX (160) 8BK-KF47 To Quantity:2pc. friend of the set
Helmet can be in.
I will upload a photo.
View detail
Thin and sufficient thermal protection
I bought this because I wanted a neck warmer to wear with my Jet helmet in the winter.
It is quite thin but has a warm lining.
Even with the nose covered, it does not interfere with wearing Helmet.
Also, the bottom is long enough to cover the neck.
The upper part is a bit tight, but it keeps it firmly in place and prevents wind from entering.
This was sufficient for city driving on main roads.
View detail
As the name implies, sturdy
The padlock part is very rigid and can't be broken down in a short time, and the chain part is wrapped with a fabric cover to reduce the risk of scratching the body or wheel. The red color makes it stand out. The length of the chain is 1.8m, which is not long enough to lock one car, but it is just right for locking other cars together. View detail
Cospa best
Transfer to a vehicle without Grip heater,
I bought these because my fingertips get cold even with winter gloves.
Installation is easy, anyone could do it in 5 minutes.
I was worried that the Handlebar Cover would be difficult to remove and insert my hand.
This product is well molded and does not get stuck when you put your hand in it.
The feel of the controls is fine for Lever, but Blinkerretc. is a bit difficult to press.
I used it for touring on a day when the temperature was below 10 degrees Celsius during the day.
(I would say (with summer gloves) not quite warm, but not numbingly cold.
Grip, I feel like I've been freed from the worries of choosing Gloves.
View detail
LEAD Industrial Optional shield Color:Gray
I purchased this as a ReplacementShield for White/Red for ApeRate.
The standard is [Color] I replaced it with Fashion because it is Clear,
I like it because it looks like Visor when the Shield is splayed all the way up.
View detail
It's priced right.
Cosmo
It fits in the Helmet in of LEAD125, although it is a Limit.
View detail
Necessary and sufficient
Cost performance is enough for me, and I carry it in my bag as a necessity for long distance riding. View detail
I put it on my SHOEI EX-ZERO.
I put it on my SHOEI EX-ZERO.
Helmet itself is suitable for city driving
Excellent sunshade effect (Because it is longer than OEM Product)
It's easy to fix with Button, but I think it's better to take measures to prevent scratches with sponge tape or something.
Texture is not bad, but Button may be too loose for EX-ZERO.
If you want Long over OEM Product, is it cosmetic?
OEM Product was out of stock and I bought LEAD Industries first and it was back in stock in a few days.
Now it's waiting in the box.
View detail
Blinker is hard to operate.
We had been using Komine's Neoprene fabric, but it was deteriorating badly over time, so we decided to replace it.
The previous version had a large hole in the Grip section so that the BlinkerButton could be inserted into the Cover, but this version does not allow it.
When I try to operate the Blinker through the Cover, it presses the HornButton.
My Motorcycle is a 2019 HondaCB650R
I don't know if it's because the BlinkerLever and HornButton positions are reversed on recent Honda Motorcycles.
View detail
Chain lock with excellent cost performance
This is the best solution for those who are worried about inexpensive wire or chain locks, but do not need something too heavy that does not match their motorbike.
It is long enough to connect to other Motorcycle and easy to earth lock.
The weight is not too heavy and is easy to move, so it is not a hassle to take in and out.
The keyhole is expected to be durable, in part because of the Cover, which makes it difficult for Garbage to enter.
View detail
Cheap ordinary Jet helmet
I was originally using a HalfJet type from the same manufacturer for my moped (YamahaAPRIO, 60cc Bore up moped registration), but my ears get cold in winter, so I considered a Jet helmet for winter and looked for a Jet helmet with a simple, normal design. I was looking for a Jet helmet with a simple and ordinary design, and I bought it because it was inexpensive, looked just as I wanted, and was compatible with all Engine Displacement Volume.
The quality of the fine details is in line with the price, but PSC/SGMark is naturally included, and it has the minimum safety performance, so I think it is good for Level 2 mopeds.
Since the helmet is designed for full lung capacity, the shock absorber is thicker and the helmet may be slightly larger than that for the 125 and up.
The size of my head is 57cm, and I put the included sponge in 4 places all around the circumference as described in the instruction manual, and the level is just right or a little loose. 57-60cm means that the difference of 3cm is 0.48cm in terms of radius, and the sponge of the same thickness just fills the space between the two. Some people may feel it is a little loose. It is better to actually try it on, but it is difficult to do so, especially in rural areas where there are almost no stores that carry the actual product.
Unfortunately, unlike HalfJet, the Edge processing of the Shield is not as good as HalfJet, and is slightly sharp to the touch. It is not enough to cause injury, but it feels cheap.
Also, it has been less than a month since I purchased the Shield and I only use it on weekends and on a small shopping Level, but it makes a squeaking sound when opening and closing the Shield. I am going to try to Grease up the Shield.
I don't feel like the air duct is working nearly as well when I open and close it. (It doesn't get cold opening and closing it in the middle of winter, and I can't tell the difference)
The Logo called CROSS on the Front is a Sticker and can be easily peeled off.
Since it is not related to safety, I removed it and put my favorite Sticker (fishing related) on it and customize it in my own way.
The SGMark warranty expires in, I believe, 3 years for any Helmet, so considering that I would have to replace it in 3 years for that reason, I think this price is about realistic for a two-moped vehicle.
View detail
Convenient
[How is it used?
Bought it to drive around the neighborhood with Scooter.
I bought this product because the size of the cap seemed to be small to reduce pressure under the seat of the scooter as much as possible.
Was the one you received as per Image?
The Black is beautiful and looks great.
The shape was good, just like the picture.
It seems like it would be noticeable if scratched.
Included Parts:, it came with something like a Sponge that allows you to tweak the Size feel.
How was your experience with it?
I didn't care about the fit, since it is semi-helpful, but since the fit is good, I thought the fit was quite good.
By the way, I always wear size M in Full face.
Jaw String is very useful when going to Convenience with the One-touch Snap and Hammer Type.
I often use it when I need two Helmets because it can hold a lot of other stuff when I put it under the Seat.
[Points to note]
How did it compare to other products?
I used to use a Cork and a half with a brim, but the size was too large for me, so I prefer the one I bought this time.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
For Shopping
I used to use a full face, but when I went shopping on my moped in the neighborhood, a full face would be too large and would get in the way, so I bought this product.
The design is very good and I like the Matte Black texture.
View detail
Good Cost performance
I bought it early because I knew my hands would get cold when I commuted to work.
I use Summer Gloves because the Blinker is tough to operate with the heavy Winter Gloves. I have been using it for about 3 weeks, including rainy days and extremely cold days, and I have no problem at all on rainy days; I can only feel the coldness of the lever because it is Summer Gloves, and I have no problem putting my hand in and out, which was my main concern. I was considering purchasing electric heated gloves, but I think this Cover will get me through. I am concerned about some details, but considering the price, I think it has excellent cost performance.
View detail
Quantity to Helmet in PCX:2pc. Set (conditional) storage available
The Helmet is said to be for 125cc and under, but the current model (2023) Two of these Helmets fit into the Helmet storage area under the Seat of the PCX.
Storage conditions, but one Helmet requires the Visor to be removed.
Helmet with Visor + Helmet without Visor
could be stored under the Seat if they were two of the following.
If it is the same Size or smaller than this Helmet, I think it can accommodate two Helmets in a similar way.
View detail
This is a mounting bracket for the same manufacturer's Smartphone case.
[How is it used?
I purchased a Smartphone case named "Adventure Large Land" from LEAD Industries and attached it to my Motorcycle with a Mount bar. Come on, let's install it!" And when I took it out of the box, I found only the Smartphone CaseSingle Body and no Bracket for installation!
Read the description on the back of the Package. Please purchase the bracket of your choice separately. I bought this product again because it seemed to be convenient for my own use in the product introduction section of Webike.
Was the one you received as per Image?
It looks exactly like the image shown in Webike's product introduction section.
It has a clamp that can be easily fixed to a handlebar or mantlebar, and an articulated mechanism that allows it to be moved to any angle, with a height of about 6 cm from the clamp.
Most of the parts are plastic, but the product seemed to have some strength and was exactly as shown in the Image.
Was the installation difficult?
Fix the Clamp to the Handlebar, Mount Bar, etc. at the desired location (where it will not interfere with driving) (be careful not to over-tighten the screws), attach a Smartphone Case, etc. that is compatible with this product, adjust the angle to your liking, and fix it in place. It is a simple and easy process.
How was your experience with it?
It is very easy to use because it is highly universal and has a wide range of movement at the top, as it can be mounted in most Large Pipe-shaped places of around 22mm.
Since the material of each part is plastic, the torques should be carefully managed when tightening.
[Included Parts:were they on?
BracketBody for installation and a simple Instruction Manual/Spec.
[Was there anything that disappointed you?
None
LEAD Industries. Adventure Large Land. There are several other types of brackets available, so please select and purchase the one that best suits your purpose of use.
Other items that would be helpful
Point and hang of installation
As noted above, fix with proper tightening Torque.
Plastic, especially in winter, can be cracked unexpectedly easily if it is over-tightened.
[Availability and clarity of the Instruction Manual
A simplified Instruction Manual is available. First-time installers should read it carefully before proceeding.
[Notes]
I think Large is sturdy if you pay attention to what I have described in places above.
[ITEMS TO BUY TOGETHER
If you purchase the Smartphone Case etc. that you want to install together, you can work smoothly and without time loss.
[Opinions and requests to Manufacturer
Please continue to develop the lineup at relatively Reasonable prices.
View detail
CaseSingle Body products and mounting brackets are sold separately.
[How is it used?
I am a middle-aged motorcycle rider who has just now started installing Mount bars on my motorcycle.
I was looking for a USB Power Socket and Smartphone Holder for the Mount bar, and I found a lot of information in Webike's product introduction section.
A friend of mine who was using a Smartphone Holder with an exposed type of phone lost his phone while playing in the mountains (luckily, he was able to find and retrieve it afterwards), so I was looking for a waterproof case type because I was worried about the exposed type. I was looking for a waterproof case type. Adventure Large Land. I found a product called "The best of the best," and coupled with the low price, I bought it.
Was the one you received as per Image?
Was it because I was new to Smartphone Case? Is it because I bought it without reading the product introduction section carefully? The product I received was Smartphone Case I was surprised to see that it was a Single Body product, and when I reviewed Webike's product introduction section........................... Mounting Bracket sold separately. It was stated that
I have no problem with the product due to my lack of confirmation as the purchaser (I purchased the bracket for installation at a later date), and I can confirm the waterproof function even when driving in the rain during touring. Smartphone Case I thought that the reliability of the product as a type of product was fully met.
Was the installation difficult?
Optional Base for mounting to the Mounting Bar, align the back side of the product Body with the claw of the Mounting Base and lock it in place, and you are done.
If you are worried about risk of falling, you may feel a little safer if you fasten a Nylon Spring style Key Holder sold at 100-yen Shopetc. on the zipper and body side.
How was your experience with it?
The response of TouchSensor becomes slow even if you are wearing Gloves for smartphone Touch due to the convenience of putting it in a Case (there is no problem when you take off the Gloves and operate it with your bare hands), and if you tend to be irritated by this part, you might want to purchase a Holder of the type that is fixed bare. If you tend to be annoyed by this part, it may be better to purchase a Holder of the type that is fixed bare.
[Included Parts:were they on?
Smartphone CaseBody only.
After considering various usage conditions, the Bracket for installation is sold separately. Please purchase additional items to suit your needs." Is it something like that?
[Was there anything that disappointed you?
Not particularly
When opening the package after purchase. There's no Bracket in the box! I was surprised, but when I confirmed that the company sells several types of brackets for installation and that the individual prices are reasonable, I understood that the concept is as described above.
Other items that would be helpful
Point and hang of installation
Not particularly
The connection part of the mounting bracket is plastic, so be careful to attach and detach it carefully.
[Availability and clarity of the Instruction Manual
I think there is an Instruction Manual on the back of the package....
[Notes]
I think Large is sturdy if you pay attention to what I have described in places above.
[ITEMS TO BUY TOGETHER
First of all, it is sold separately. Mount Bracket for mounting Without this. Just a Compact Smartphone Case" The result will be a
[Opinions and requests to Manufacturer
Please continue to develop the lineup at relatively Reasonable prices.
View detail
If you think of it as a Universal Product
SHOEI's EX-ZERO OEMVisor is a good price, so I installed it based on the impressions of having this Visor installed.
Because they are longer than OEMs, they may seem to be an eyesore in some people's view, but they are effective in shielding them from the sun. The wind effect is not felt as much. I turned my head A little upward while driving to try it out, but my neck was not taken away, probably because of the air outlet.
I think it is a good product if it is considered a low-priced Universal Product.
View detail