Reviews
unusual
I have never seen custom parts before.
Leather Cable Wrap. Grip, Bag, and TankLeaf are all from TripMachine Company. I think this will be a brand to watch out for in the future!
View detail
CRF250L MD47 for ACCWiring extraction
Used on a 2023 CRF250L.
If you remove the Left Side Cover, you can access the upper area of the Accessory Case, where there is a 4-pin Optional Connector hidden by the Waterproof Cover. There is a 4P Optional connector hidden by the waterproof cover.:Since 2pc is ACC, we used this Connector to take out ACC and used it for ACC connection of DAYTONAD-UNIT.
View detail
It can be used normally
The female side of the Harness was too stiff, so I used this product to change it. If you tighten it too hard, the cable will break and the connector will become useless, as is the case with other connectors. View detail
This is a summary purpose of the branched Wiring.
[How is it used?
To consolidate additional and branched wiring in the front cowl of ADV160.
Was the one you received as per Image?
The size and texture were exactly as shown in the Image.
Was the installation difficult?
Simply remove part of the Cowl and reinsert the Wiring.
How was your experience with it?
It is nicely put together, and since it will also be Cover, we can expect Simple Waterproof.
View detail
Cost-effective and time-saving
Used to extract DC power from XR100.
The items used were AC-DC converters, Relay, rectifying Diode, and EDLCSUPER capacitors.
The intended use is Electric Type Meter and USB and Portable navigator power supply.
I took a countermeasure because when Portable navigator is half-wave rectified, it often does not turn on at startup.
There are many rectification diodes available, but we chose this one because of its reliability and the cost of taking out and producing it, considering the time and effort required to make it.
It would be sufficient to use a battery type, but we want to make it maintenance-free, so this is what we have done.
Half-wave rectification DC extraction of RegulatorRectifier has been installed in advance.
View detail
Reliability used to date
Used to extract DC power from XR100.
The items used were AC-DC converters, Relay, rectifying Diode, and EDLCSUPER capacitors.
The intended use is Electric Type Meter and USB and Portable navigator power supply.
I took a countermeasure because when Portable navigator is half-wave rectified, it often does not turn on at startup.
There are many inexpensive Relay products available, but we chose the smallest and most reliable one we have ever used.
It would be sufficient to use a battery type, but we want to make it maintenance-free, so this is what we have done.
Half-wave rectification DC extraction of RegulatorRectifier has been installed in advance.
View detail
For Wiring Processing
This is essential for Wiring processing.
They are inexpensive and come in a variety of colors, making them very useful.
View detail
To the added Wiring process
We fix Wiring for Motorcycle as well as Garage, etc.
Wiring is used separately from Tie Band to avoid clutter.
View detail
For Wiring work
Wiring was used for protection after extension with solder.
A heat gun is recommended, as burning with a lighter may cause scorching.
View detail
For Wiring Summary
This is essential where Wiring can be put together or rubbed.
I guess it just can't help but get cracked in a few years when exposed to UV rays.
It is good that it can be installed after Wiring.
View detail
Toys for your free time
Hazard & to be easily visible at night View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, Others Universal
Works as expected on a JB03 Monkey 125
Installed Kellerman Atto indicators front and rear with stock relay and had hyperflash. I ordered this Kitaco LED flasher relay for my JB03 Monkey125 and it fits/works great. No more hyperflash. The relay is located under the fuel tank, the easiest way to get to it is on the right side. Lift the tank up 2 inches for easy access. View detail
SR400 Electrical Equipment Plate installation
Shallower than expected, Battery feels less secure. View detail
Different colors!
Functionally, there is no problem, but the color of the terminal is different between the picture shown on the website and the actual product received!
The photo shows Silver, and the received item is Gold!
I wanted to be inconspicuous and bought it because it was Silver….
View detail
I haven't seen needle GoldHanger lately.
I purchased this product (adjusting for shipping costs) for the installation of a car's driver's recorder.
In the past, we have extended the needle GoldHanger and used it as a substitute when passing through Wiring for installation of Motorcycle's driver's record, etc. Recently, however, the needle GoldHanger itself is not seen very often.
This is convenient for playing with electrical equipment because it is properly insulated and can be easily passed through tight spaces by passing the Wiring through the Wire loop. The needle is not as hard as GoldHanger and is easy to use. It is not expensive and should be kept in your tool box.
View detail
Easy to use
Used for Wiring protection around Engine.
The Protective Tube is easy to install and looks like a tube, whereas a normal Protective Tube requires the Connector to be removed.
It would be even better to have Variation such as White color.
I gave it a 4 because it has just been installed, but I don't think there are any problems with its effectiveness.
View detail
Cheap, safe and easy to use
[How is it used?
When I was working to install YOSHIMURA/Oil Temperature Meter on XJR400R, the attachment wiring was too short to reach DAYTONA/D-UNIT under the seat, so I used this product to extend the wiring and installed it successfully. I extended the wiring with this product and was able to install it successfully.
How was your experience with it?
Very easy to use
AVS 0.50sq is often used for electrical components in motorcycles, so those who often tinker with electrical systems should have one in their tool box.
How did it compare to other products?
Basically, we only purchase electrical components from Emon, but you can easily find them at Home center or other places. However, it is much cheaper to buy on the webike.
[Points to note]
Nothing in particular, but it is safer to use dedicated tools for crimping and crimping firmly to avoid trouble.
View detail
I used the precious Large caliber Type compared to the ACTIVE-made Type.
[How is it used?
Heat Shrink Tube was purchased to hold the heat resistant hose in place as the oil cooler hose of ACTIVE was covered with the heat resistant hose and converted to BlackHose.
I used the ACTIVE one at first, but I forgot to put the Shrinkable Tube through the Hose.
Was the one you received as per Image?
It was as shown in the Image, but the total length was 12cm/Quantity:It said "1 Set of 2pcs." so 6cm*Quantity:I thought it was 2pc but 12cm*Quantity:It was 1 Set of 2pcs.
Was the installation difficult?
It's easy. As you can see in the video, it can be threaded over the top of the fitting, and the length can be easily cut with scissors. Even if you don't have a heat gun, you can use a lighter or dryer for shrinkage.
How was your experience with it?
I have no complaints about its use.
The performance was comparable to that of ACTIVE products, and the shrinkage was Smooth.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Color is more Color than expected:Gray was strong.
I think I would have felt more comfortable if the Black color was a little stronger.
View detail
Almost OEM
In SR's case, the OEM's mall is halfway between
Only length is available. Sober Parts
However, it is necessary to properly use the Seat.
Since it is possible to cover up to
It is surprisingly Recommendation. Installation is
Rubber hammer as it can be slightly stiff.
without having to remove the Tank if the
It can be installed cleanly to some extent.
SR is 2m with a little extra.
Both Sides has a slightly exposed portion of the genus Gold.
before installation as it may cause rust.
You can cut off a little bit of both ends.
View detail
For electric heating Wiring
It was used for Wiring for electric heat.
I had originally been using an electric heating wiring system, but I was concerned that the current was flowing even when the key was off, so I installed this system.
It is Emon nature and it is safe.
View detail