Reviews
For Overhaul of Suspension.
I purchased this tool for overhaul of my Motorcycle Suspension. The difference from other products is that it does not affect the spring of the suspension because it uses a string to shorten the spring. Other products are designed to hook a Bracket or Plastic Hook to the Spring, which may damage the Suspension depending on the type of Suspension.
It is more than twice the price, so it is more expensive in terms of cost.
View detail
Handlebaretc.Easy to cut
It takes a long time to cut with a thread saw etc., and it is not possible to cut cleanly, but it takes a really short time and finishes cleanly. View detail
I think it's cheap
Personally, I thought it was inexpensive.
It feels good to use, polishes properly, and is convenient to have.
I would buy it again.
View detail
Motorcycle with Cowl should buy it before you regret it!
I purchased this product (adjusting for shipping costs) for the installation of a car's drareco.
You can get by without it, but you can scratch it when removing the lining, and it is easier to remove the Clip, so you can do a more careful job if you have it.
Actually, I seem to have made a mistake when removing the Motorcycle Cowl, and there is a spot where I broke a nail before I knew it. I think it could have been prevented if I had used an inner lining remover properly.
By using the inner lining remover, it will be easier to apply force to the nail/Clip part, so I will use it from now on to prevent damage.
If you do not have one, we recommend that you purchase one, as it will come in handy in your tool box.
View detail
This tool is very convenient for the task
About quality and texture, I can confirm that the quality is good and that the material used is steel for the entire tool with a mixture of wire to measure the gap and plate to adjust the gap. About the feeling of use, I had previously used feeler guages to measure my spark plug gaps and a small flat blade screwdriver to open up the spark plug gap if required, this tool is very convenient for the task now. Products to buy together, Some new spark plugs from NGK preferably would be ideal to also add to your cart when purchasing this tool so you can have a strong spark from your fresh and correctly gapped spark plug. Difficulty of installation, I can say the fitment of the spark plug gap tool for my installation was very easy due to the simple nature of it's use caused by it's convenient and compact design. Cost performance and comparison with other products, The pricing of the spark plug gap tool is great. You receive a product with a design that makes checking and adjusting spark plug gaps easier then using feeler guages at a price that anyone can afford to add to their toolbox. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Dirt removal
I bought this to remove stuck-on dirt.
It is not that expensive and seems durable.
In the image, I imagined it to be a little smaller, but it was a little larger than I expected.
The Wooden Handlebar section is also easy to grip and use.
View detail
For cleaning
Quantity:1 Set of 3pcs. and the price is low, so you can use it without worrying.
The Plastic section is also easy to hold and has a nice elasticity.
It is cosmetically good, so it is enough if you can hold it at some level.
View detail
![[PIT GEAR] Wash Brush Set PG-224](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0067/9496858_1_TS.jpg)
It is easy to use
I used it to wash Engine of SEROW250.
Until then, I had used Small Brushetc.
Brush like a hair on a needle Gold can get into tight places Smoothly.
It was very easy to wash.
View detail
One can be used for air bites, maybe.
Brake fluid is replaced and used to drain the fluid when air bites.
Once the Brake is inserted into the loop, it can be fastened with a special pin or tied with a needle gold so that it cannot be wiped off.
The front side of the tank is above the tank and gravity will cause it to fall down to a certain extent, but the rear side is almost parallel to the tank, so it is sometimes difficult to get out the tank.
It is a delicate item.
If it is completely air bitten and the Lever and Pedal are completely scoured, there will be no Fluid because there is no pushing force. This syringe type aspirate is not powerful enough.
At that time, if you can connect VacuumGoods or something, you can make it work, but if not, just take it to the shop. (Lol)
They did a full Route exchange at Red Baron for $3,160 for just the Rear. (Lol)
View detail
Handlebar fixing bolt is loose
The bolt that fixes the handlebar of both Tap and Dice tends to loosen, making it a little difficult to use. View detail
YAMAHA OEM Tappet Adjuster
I used to use wood screw for valve adjustment job in the past.This OEM tappet adjuster tool quality seems suitable for light work that it will see in a DIY .The square swivel does fit.I can use this tappet adjuster tool to adjust the valves on my yamaha TW200 motorcycle .this is by far theSl.The square drive fits perfectly.TW200 VALVES TICKING NOIZE LITTLE LOUDER THAN THE OTHER BIKES.The main purpose of tappet clearance is to allow a small expansion gap of the valve stem and pushrods to accommodate the effects of a heated engine.Using this handy tool can loosen or tighten the valve adjustment screw while holding the lock nut.I would say ,Very much needed tool.I should have buy this tappet adjuster tool earlier.Price is very reasonable and cheap.I'm very glad to have this tool.As usual package arrive on time.High Quality Packaging and Service.Thank You Webike.The best online Shop.I highly Recommended View detail
Just the right size
I have an example with a slightly larger size than this, but I bought this one because I felt like I couldn't hold it in terms of space.
It is just right in terms of Size feel. The dimensions and depth are as shown in the picture. It can be used mainly for placing tools in use or long items such as shafts, rather than small items such as screws.
If you want to place a screw or something, it would be better to choose Small Tray or Silicon Plate with Magnet from the same brand.
View detail
Easy to use
It is a tool that uses the Lever principle to remove the interior of a car or other object.:Because it is plastic, it was easy to work on without scratching the interior. It is a standard product, but it is very useful. View detail
handy tool
This KTC stainless steel scraper is needed to remove the sealant remaining on the surface when repairing motorcycle engines. It is a set of two and can be suitable for scraping surfaces of different sizes. The wooden handle is easy to hold and the quality is also very good. Unlike The ones I bought before were sold out soon. The products of webike are really good and worth buying. -------------------------------------------------- -------- To repair the motorcycle engine to remove the sealing rubber remaining on the surface, this KTC stainless steel scraper is needed. It is two sets of scrapes that can be suitable for different sizes. I bought it quickly before , and Webike's product was really good and worth buying. Powered by Google Translator View detail
Dismantling essential
The motorcycle I ride is YAMAHA NMAX155. If the scooter needs to be repaired, you need to remove a lot of covers. If you use a metal pry, it is easy to damage these plastic parts. This amon plastic pry bar is very useful, and it is easy to remove the covers. There will be no damage, and the resin nylon is also durable. -------------------------------------------------- -------- The motorcycle I rode is YAMAHA NMAX155. If the pedal motorcycle needs to be repaired, many coverage parts need to be disassembled. If you use metal pry, it is easy to damage these plastic parts. There will be no damage, and resin nylon production is also durable. Powered by Google Translator View detail
For cleaning inside Dust Seal
I use it to clean the inside of dust seals, etc. I am worried about scratches if I pry with a screwdriver, etc. With this, I can shift the scratches on the dust seals to the smallest original size. View detail
Fits: YAMAHA TW200, YAMAHA TW225E
This would be useful.
The price is a little high, but it makes Spring replacement a cinch. View detail
Useful if you have it. I can manage without it.
The LEDs are ideal for observing areas that are not directly visible, such as the underside of the crankcase, which is dimly lit even during the day. Well, since it is usually dark in areas that cannot be seen, it makes sense that it is with LEDs. It is very convenient.
It also stretches quite well and does not flex when stretched.
View detail
Gaps in air-cooling fins do not reach deep enough.
Very easy to use as it can be rubbed vigorously.
The core is like a needle Gold, and if there is a gap of about 2 cm in diameter, it can be plunged and washed.
Convenient for washing off mud and oil, but not for washing gaps between air-cooling fins
The core is hard and does not bend limply
Maybe I'll bend it myself before I use it.
View detail
It's easy for anyone to use.
The Clip portion is +Red and -Black. and visually very easy to figure out!!!!
I have been using it for over 8 years with no problems. It is well made and
Compact and affordable! Impeccable!
View detail