Reviews
Switching from Digital torque wrench
[How is it used?
I have been using KTC's Digital ratchet until now.
In use Alarm sounds when setting Torque is reached in Spec.
It is difficult to stop the tightening at the time of sounding but setting TorqueExactly to stop
If it's around 10N.m, it's not so much Over, but around 30N.m, it's up to the latter half of 31N.m.
The display goes and so on.
I'm not sure what's going on, so I'll stop at Mechanical's Cutting edge.
Buy MechanicalTorque wrench from Tonichi
Was the one you received as per Image?
as pictured
How was your experience with it?
The initial setup is a bit tedious.
I still feel more comfortable with Mechanical.
The easy-to-understand structure of the Torque, which can be locked with a click, is good.
There is just no visible N.m. indication, but it may be due to the degree of tightening.
I don't know, maybe it's Overtorque.
It's invisible, so it's good!
[Points to note]
So much so that I always drop the scale to at least Torque when I'm done using it and store it.
Digital ratchet is easier and hassle-free in this area.
How did it compare to other products?
Digital ratchet is a method of specifying the target Torque as a number and stopping it when it sounds.
Simple and easy to use for everyone, but the Spec.
Tightening multiple parts is difficult to do quickly.
The preliminary alarm sounds, and from there the main alarm sounds and reaches the set torque, but it takes a long time to close from the preliminary alarm to the main alarm while watching the situation slowly.
On the other hand, with Tonichi's MechanicalTorque wrench, it's just a click and you're done.
I can tighten them one after another.
Of course, if you tighten it with a lot of force or over the zone of idling after cutting, it will over, but if you do it normally, it can be tightened precisely.
I don't often use both Digital and Mechanical, but I'll probably end up using only Mechanical.
View detail
Thick Skin Mesh Gloves
Was the one you received as per Image?
I keep using this Series and it's perfect.
[How did you feel about the Fit?
ExactlyFit for me with typical Japanese hands.
Comfortable to wear with no excess fingertips when gripping.
How was your experience with it?
Mesh Type for windage Spec. but.
It's a little thicker, so it's not that cool.
It's a little hot under the blazing sun in midsummer.
It's nice if it's a little cooler, like a mountain road.
The leather itself is soft and has no stiffness.
I think Lever's controls are good.
I like that it's Touch panel compatible with the phone.
[Was there anything that disappointed you?
Nothing in particular.
What are the specs of the product, such as protector?
Knuckle guard and palm guard provide a full range of protection.
I wonder if it's possible to get your palms on the ground when you fall, but it doesn't look like it would peel the skin off your hands.
How did it compare to other products?
Leather is thicker and sturdier than DAYTONA Gloves
I'd say it's a harder leather in comparison.
I use DAYTONA for short trips and YELLOW CORN for longer trips.
View detail
![[Xess] Original Sticker](https://img.webike-cdn.net/catalogue/images/13108/3-t_00103_TS.jpg)
perfectly
He said it would be better if there were both round and square designs. But I am satisfied. View detail
Fits: KAWASAKI ZXR250, KAWASAKI KLX125, KAWASAKI D Tracker 125, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ELIMINATOR 250V, KAWASAKI ZXR250R
KLX125
KLX125
DrumstickDrumstick fits!
View detail
Full Mesh and quite airy.
Was the one you received as per Image?
I had tried it on, so I guess I'll just leave it as it is.
[How did you feel about the Fit?
It seems that my hands are Exactly on DAYTONA Gloves.
Just fit, not too short or too long on any finger
Leather is soft and comfortable.
How was your experience with it?
Full Mesh allows air to flow through so well that even on a hot day in late April, it can feel a bit chilly.
Expect it to be much cooler in midsummer.
The leather is soft and thin, so the feel of the Axel and Lever controls is moderately good.
[Was there anything that disappointed you?
I think it's the expected HaGap, or rather, my hands will be black with dye at first...
I'm sure after a few uses the color will stop shifting.
My hands are going to be Black for a while and I'll have trouble on the road.
What are the specs of the product, such as protector?
The knuckle guard and the leather of the palm are thicker, so I think it will protect me to some extent in case of a fall.
How did it compare to other products?
I'm not sure how it compares to Gloves, which is close to 20,000.
These Gloves are very well made for the price.
View detail
Fits: HARLEY-DAVIDSON SPORTSTER Family, HARLEY-DAVIDSON DYNA Family
Used for GSX250E
I bought it knowing that it does not fit. The inner diameter is 39Φ and the inner diameter of my car is 33Φ so naturally it is loose, but since it does not fit the outer diameter due to the Stubby installation, I dared to fix it loosely so that it can move freely up and down. The Inner is short and not traveled a lot, so it works well as a protector to protect from stepping stones on the Dirt. View detail
Purchased for a Circuit run.
I bought Plain Weave Carbon, the mold with Tank is also good as it fits Exactly.
Less movement of the hips and lower back in Circuit driving and easier in Breaking.
Almost all of my Circuit buddies are installing them!
View detail
Quantity:Set purchase is recommended.
I think it is good because it is dedicated to this product. The quality and functionality are just as I expected, and I have no complaints. View detail
Looks GOOD??
It looks GOOD.
I think it is stronger than without it, but I don't know.
The price is a little high.
View detail
Nice shoes.
I used to wear non-punching type, but it is hot in summer, so I bought these. I haven't worn them yet, but they are hard at first, so I think it would be better to fir them by hand before putting them on. View detail
Fits: HUSQVARNA TC 125, HUSQVARNA TC 250, HUSQVARNA TE125, KTM EXC, KTM EXC-F, KTM SX, KTM SX-F
Great replacement clutch lever
Best lever on the market,Buy one of these levers,Looks great and functions flawless. you will remember my words when you drop your bike and race because of a broken OEM lever.Durable levers, bike cartwheeled 4-5 times and the levers only had minor scuffs. View detail
I've been curious about this for a while.
I have been curious about it for a long time and took the plunge and purchased it. I am still in the process of setting up, so I can't comment on the drills, but I felt that Axel operation was a little lighter. However, I am concerned about the durability, so I will comment on that later. View detail
The Front is also Titanium to match the Rear.
[How is it used?
When the rear was replaced with brembo, the mount bolt was changed to Titanium to match the look.
Was the one you received as per Image?
The real one is cooler.
Was the installation difficult?
Easy as long as Torque management is in place.
Anti-gouging agent should be applied.
How was your experience with it?
Titanium weighs 23g compared to 42g for OEM, 76g lighter for 4pcs.
I don't really know the difference, but I like the sound of Titanium.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It would have been nice to have a VERSION without holes for Wiring.
Bolt with holes in it looks a bit Race ish.
I wanted to keep it a little more subdued.
[Points to note]
Aluminum and Titanium, so be careful of galling!
How did it compare to other products?
βMaterial:With Titaniumium's Bolt, four bottles cost almost 30,000 yen.
A Titaniumium Bolt from Zita would cost about $2500 per pc.
It costs only 10,000 yen to replace four bottles.
I am afraid to use unknown Titaniumium Bolt sold on Amazon or Yahoo!
View detail
Installed on SEROW250.
It was possible to install if only the protruding part connecting the OEM Fender and Headlight could be avoided (I used a nipper to cut it off). (^_^;) (e.g. "I'll be back")
FenderRear also manages not to contact the vehicle body
Compared to the OEM, it is shorter and less susceptible to wind, and I feel that it has reduced dizzying when running.
Design was also MATCH with the car body and got tired of OEMSpec.
This is a Recommendation for those who have come to the site.
View detail
Fits: YAMAHA MAJESTY250, YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY, YAMAHA XVS950A, YAMAHA SCR950, YAMAHA GRIZZLY700FI, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA BOLT, SUZUKI Swish LIMITED, SUZUKI swish, SUZUKI Gixxer, SUZUKI Address125, SUZUKI V-STROM250, SUZUKI ADDRESS110, SUZUKI GSX250R, KAWASAKI VULCAN900Custom, HONDA Dio110, HONDA glom, HONDA LEAD125
I think I'm feeling Torque up.
After the last replacement at 10,000Km, it was replaced for the second time at 20,000Km.
There were no glitches, and I feel like Torque has gone up in my mind.
View detail
Fits: HONDA CB400SF VTEC, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR REVO, HONDA CB400SF VTEC REVO
If only it were a little deeper.
The bottom is open so you can change the Oil as it is, but if it were a little deeper in terms of design, I would give it 5 stars. View detail
![[Closeout Product]Racing mesh glove[special price]](https://img.webike-cdn.net/catalogue/images/101337/YG336_BKGM_TS.jpg)
Mesh Gloves
Anyway, the design is great. The texture is also good. View detail
![Yamaha Scooter 125cc [KAISOKU] Clutch](https://img.webike-cdn.net/catalogue/14762/10170122_507d89ac7d9d9_TS.jpg)
Fits: YAMAHA Cygnus X, YAMAHA MAJESTY125, YAMAHA CYGNUS X, YAMAHA Axis Treat, YAMAHA BWS125(BWS), YAMAHA Majesty 125, YAMAHA Axis Street, YAMAHA BWS125 (Bewith)
finally
I finally got my hands on Clutch, and I'm happy to say that it worked as well as I wanted it to! I'll have to look into buying the next part again! View detail
VINO125
The size and shape were the same, but a little cutting work was required, so if you have the tools, you can install it on the VINO125! View detail
exchange
I managed to attach it successfully by replacing only the cover. View detail