Reviews
Fits: YAMAHA SR400, YAMAHA SR500
When it comes to SR, ContiExhaust System is the way to go!
It is installed on a 2012 SR400FI.
As expected from Peyton Place, the sound and appearance are unquestionable. I am satisfied with the large volume of the dry single-cylinder sound of the Helicopter, which I have longed for.
I have been able to use it with no problems after installing it without any after fire, probably because it is a FI vehicle. I don't feel any power down.
In that sense, I am Large satisfied.
However, as you said, it is an explosive sound, so those who are in an environment where it bothers you should be careful.
I don't care about that! If you don't care about that, this is a Recommendation.
View detail
I tell myself, "It's all in the looks.
Shift feeling has worsened as others have evaluated.
I originally purchased the OEM Rear Sets with the intention of returning to them if they looked too bad, but they were easy to install, and above all, I think the Style is the best. Various sacrifices (GEAR is hard, Position is tight, etc.) It makes me want to ride in this Spec. even if I have to pay the
Pedal's Quantity:Pair (for Left and Right) Rattles can be eliminated with a little ingenuity, and without rattles, the upper and lower Chica la Quantity:Pair (for Left and Right) FeeRing can also be improved because there is no escape to
The footpeg cannot be folded at kick start, which is a little annoying, but it doesn't seem to hit the feet, and if you are replacing OEM Rear Sets, it will be easier to get a good footing.
I think it is such a product that motivates people.
View detail
Picture up was carried out.
Picture up was carried out. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
A design is dramatically good. Although it is unavoidable that a handle position also becomes a lower part considerably and a position becomes tight as a result since both ends have fallen ... Good designs are a function and a contrary good exampl
A design is dramatically good.
Although it is unavoidable that a handle position also becomes a lower part considerably and a position becomes tight as a result since both ends have fallen ...
Good designs are a function and a contrary good example.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
Good bass.
I put it on sr400 type 5.
The OEM Large sound has been replaced by a low-pitched, single-cylinder sound, and it's cool!
However, the sound was larger than expected, so I put DAYTONA's Inner silencer inside the Slip-on Silencer to muffle the sound.
The volume is now good, but it is still too much out of tune and after fire when Engine braking. It takes a lot of Gold to thicken it up with the fuel conditioner, so do I make it a little less disconnected or just leave it out of my mind? If the After Fire is not good for the Engine, we need to address it.
View detail
Fits: YAMAHA SR400, YAMAHA SR500
sr400 FI Vehicles (RH-03J) to?
The product was packaged very carefully.
I really like the way it looks and sounds. It looks great and sounds great.
Just someone who is struggling with volume etc. (In residential areas, etc. …) I think it's not really recommended, but I think it's a good idea. Because the sound is Large threshold than expected. (Lol) My kids said it was like a Helicopter flying.
But I highly recommend it if you want a nice, bombastic ride:???? I'm very happy with my purchase.
View detail
Increased rear rigidity
Although I didn't have a large complaint about the OEM suspension as I still have about 9,000km on the odometer I replaced it with KYB's Suspension, which was highly rated on the net
Installation was easy with the Center Stand, as you mentioned
My impression of the ride was that the changes weren't very clear at first But as I drove the car, it became easier to open the Axel at the start of cornering than before It's very nice Also, I gradually felt that the rigidity of the rear was increased and I felt safer than before It is
As for what I would like to see improved, it was also on Net, but DamperBody and Spring is rubbing and I hope it doesn't rub
It looks better and I'm glad I installed it (^^)
View detail
Fits: YAMAHA SR400, YAMAHA SR500
Exhaust System exhaust pressure is amazing!
I installed it in the exhaust pipe of the NORMAL Exhaust System The position didn't fit 5mm, so I shaved it off and finally installed it The sound volume is larger than the Full Exhaust System that had been installed until now It's great I haven't run it yet, but the tone is good, and it's slim so it looks refreshed and runs great I can't wait View detail
Rear suspension that does not interfere with the OEM Chain Cover
If you have socket wrenches and torque wrenches, you can easily install them
Stand on the Center Stand and replace the rear suspensions on one side at a time You can
Since it's for the SR400, my '19 has been able to use it without any interference with the OEM Chain Cover
The attenuation and pre-road can be adjusted to your liking, and more importantly, you can use it as a normal brake booster This is the peace of mind of Grip that is incomparable to suspension
Especially for the scary Normal suspension, which loses its grip at 100km on the highway I can't go back
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Classy looking
You may need a little hang when installing it, but I was able to install it without any large problems It's a great product I thought about other companies' products, but I'm glad I chose this one because of the way it's mounted at the back and its soft, curvy shape It is View detail
For a SMART look
The OEM Headlight is chunky, so I replaced it with this one
It's well made and beautifully shaped
Headlights for 2010 FI Vehicles and CHIC DESIGN I combined it with Bracket, but the Immobilizer was in the way and the Headlight I could not install it unless I extended it with Bracket+Bracket Depth is required
Because BodySize becomes Smallish, Wiring did not fit in Because other purchasers seem to put in well, does it fit by the device?
For a more classic and SMART exterior, it's Recommendation
View detail
Refreshing from the last moment
The OEM Headlight is, for lack of a better word, light and imo, so I replaced it
Installed on CHIC DESIGN Light Bracket It has the best appearance (* Requires processing
The front area has been refreshed and has a dignified appearance
Wiring is a large oddity and I left it to PRO
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Like Chalk and Cheese
Well packed and arrived 4 days after processing. Out of the box it’s evident that it is a quality fabrication. Heavy and solid, not tinny or fragile in any wayt. Once on the bike after 15 minutes (and three bolts) the difference between the OEM exhaust and the Peyton Place pipe is jaw dropping. The 400 thumper now snarls on hard acceleration and purs with menace at idle. Sounds similar to a Huey from the Vietnam war in the mid range revs. Slight backfire evident on deceleration. I may need to bung up the AFI to compensate. It’s a loud but refined muffler. So loud I’m hoping I won’t get any extra attention from the po po. View detail
Fits: HONDA GB250 Clubman, HONDA GB250 Clubman
Style sounds perfect
The price is a little bit but easy to install, very satisfied with CoolStyle.
I chose the JMCA Correspondence item. I am satisfied with the sound quality but it is a little smaller than the OEM whether the volume is a little Small, Recommendation for non-compliant products to people who want volume.
For those who are also used everyday JMCA Correspondence items may be just right volume.
View detail
It looks great!
I attached it to the FI of SR 400 but please remove the Fuse box and submerge it under Instruction Manual. ... Although it was written, but I can not take out the Fuse box so I added Seat as it is and attached it without problems!
Fitting has no problem! I do not do graffa! It looks good Parenthesis Goods that can be Recommendation well.
SR is carburetorSpec. Although there are many seats, FISpec. I have a hard time finding, but I bought it properly but I am satisfied with Large.
View detail
A beautiful grab bars
These are very beautiful grab bars,the shape is well balanced.When you install these grab bars into the Sr400 it simply blend with the chassis makes the overall appearance neat and simple,the only drawback is it lack of strength if u compare these with the original grab bar,however I am still very satisfied with these grab bars it definitely improve the appearance of my bike. View detail
Satisfied
Purchase so you can easily dress up at reasonable prices
After wearing it is not conspicuous than I thought, but since it is originally part of such place, there is no particular problem
Aluminum is care for Large strange so Material : Stainless Steel is also good
There is a corner part in one place border Rubber, but since it was peeling (Originally this kind of place) We repaired with adhesive, we considered this and considered this point
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
SR400Injection into a car.
I installed it in SR 400 fi car of 2016.
I also considered Megaphone of Planas, but it was expensive as to whether the sound is too Gentle, so I made it to this Norton type.
It is not possible to compare because there is no SR ride around, it was pretty excitement because I bought it with just the sound of YouTube but it is an Exhaust System that exceeds expectations to the Large width!
If you are talking about sounds, Helicopter (Lol) Supapapa is a crisp Sound.
It is perfectly comfortable to climb the pass loosely around 4 th gear 3000 rpm.
Compared to OEM, it gently blows up to 4500 rpm.
I do not feel Torque has fallen.
The fuel economy got somewhat worse.
A gold adapter bundled between Frame and Exhaust System is shipped but if you have an OEM Bracket you can install it without problems without using an adapter. If it is an OEM, we also have anti-vibration Rubber, so some is safe.
Just a small amount of exhaust leaked from the connection, I think whether Liquid Gasket combined use is better.
3 months after getting Motorcycle's license, 3 months after getting on SR.
The first Custom is this Exhaust System!
I am satisfied from my heart.
View detail
Curve is easy to bend.
I'm obsessed I understood that Curve became easier to curve. It is very easy to bend and driving is fun (^^)
Although it was written even in the previous Review, since Front fork is still old, it got to understand the previous flavor very well ....
It is Front fork next time I save the gold.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
It may be a little thicker - - -
Before installing it we feel pretty poor.
After installing it is a firm feeling for the wall thickness of Pipe.
Actually I'd like to get a bit more rigidity when I try to put a hand on the bar - - -
Appearance is clearer than NORMAL and it feels good! The weight is light enough not to be compared with NORMAL
Comprehensively I think that it is quite satisfactory.
However, it is not made so much, so if it is a bit cheaper it was five stars
View detail