Reviews
Just attach it to the phone cover.
Quantity to Holder:Set is 90-degrees rotation, so the phone is in portrait and the Quantity:Set or beside Quantity:Set or not Set is determined by this orientation.
I can change it on the Holder side with Hexagonal Wrench.
I use it every time I go touring and have no problems.
Large Variety Satisfaction
View detail
![[Optional Accessory] Anti-Vibration Module](https://img.webike-cdn.net/catalogue/images/112586/34092_TS.jpg)
safe before you fall
I bought this as a precautionary measure when mounting my iPhone13mini on my smartphone, as I didn't want to risk Camera failure due to vibration.
They say it reduces vibration by a whopping 60%, unless the Camera breaks down. It works!" I think it is a feeling that I keep thinking about.
It is reassuring to know that it is not going to fall down, but I can't really feel how effective it is.
The only complaint is that it looks larger than expected.
I was using SP CONNECTO because I prefer the inconspicuous look of the phone when it is not mounted, but it has become much more assertive.
Since Coloring is all black, I managed to keep the assertion to a minimum, but I honestly wish I could have maintained a bit more Stylishness.
But I can't turn my back on the idea of breaking the Camera on my phone.
View detail
Fits: Others iPhone 12 mini, Others iPhone 13 mini
Model-specific products are good!
SP Conecto itself has been in use for some time, but there were no model-specific products because the phone was made by Xiaomi.
So I used UniversalInterface on a commercial Smartphone Case.
I was still not particularly dissatisfied with it, but since I started using an iPhone, I decided to use a dedicated Case anyway, so I decided to purchase one.
As expected of a dedicated product, the fitting is excellent, and as a smartphone case for everyday use, the protection performance and texture are unquestionable.
The SIDEButton is a little difficult to press, but I think it is acceptable.
Wireless charging is also very convenient because it can be used without modification.
The price may seem a little high when looking at the Smartphone Case, but I think it is reasonable when you consider the total convenience.
It also makes me always try to keep my hands beautiful, because if I touch them with greasy hands, they leave a solid mark.
View detail
Properly installed.
Product Name
SP CONNECT SP CONNECT SPCO NECTO Universal Interface
Item Number
34216
Vehicles
MT-09 (2021)
Number of man-hours
About 10 minutes
Required Tools
Scissors, Rubber Band
Why did you choose this product?
The Motorcycle I bought had a SP CONNECT ESPECO NECTO Mount on it, so I thought about replacing the entire new phone mount, but I wanted to get it cheaper, so I went with this one. I also didn't need the phone Cover I have now, so it was just as well.
Was the one you received as per Image?
It was just as shown in the Image, and the Instruction Manual was also included.
Was the installation difficult?
Large sturdy if the mounting position is not mistaken.
How was your experience with it?
I am glad that it was able to be installed securely and still withstand the vibrations of the motorcycle.
[Included Parts:were they on?
Removal Tools and Installation Replacement Parts and Instruction Manual
[Was there anything that disappointed you?
The product could have been cheaper.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Simple
I wanted to put it in an inconspicuous place, so I chose the Stem Mount.
Anti-vibrationModule and Universal Interface were also purchased, so the price was just under 17,000 yen, which is very expensive for a Smartphone Holder.
Well, I guess I'll just have to focus on design...
Fits in diameters from 15mm and up.
I put it on Center for now.
But
If you attach the phone vertically in this condition, you can hardly see the Meter.
The phone is an old Android model AQUOS sense3 plus
I shifted it to the Right side.
Now the Meter is visible. Now we will run it and check it.
I've only been running for a little while, and it's not something I want to watch while running, so I hope I won't be inconvenienced.
View detail
Nice but expensive
Looks upscale, but the price is high. View detail
Smartphone Holder that looks SMART
Purchased to attach Smartphone to Motorcycle.
Apart from this, a UniversalSmartphone Case from SP CONECTO is used.
Removing and attaching the Smartphone is fairly easy and only requires a 90° turn. It is the fastest way to attach and detach a Smartphone.
There are similar products, but Advantage is the Large size in terms of quality and ease of removal and attachment with one hand.
It can be detached by simply rotating it, but there is no locking mechanism such as a turnstile, so some people may be concerned about it falling off. However, the
If it is firmly secured, it is unlikely to fall.
View detail
First Motorcycle mount
This is my first time purchasing a mount for a motorcycle, so I have nothing to compare it with, but I used it for about 400 km on a highway touring trip the other day and it did not shake or come off in any way. I used the Motorcycle Mount for about 400km on a high speed touring trip the other day and it did not shake or come off.
I have also gapped the handlebar at an angle, so I would recommend a straight line.
The cost may be higher than other mounts, but Merit has a wide variety of parts, so I think Merit can be applied to other applications.
Two disappointments.
? The fact that the protective Seat of the phone has Gapped. Probably, if it was bent even a little from the Fit feeling to the phone, it was pushed by Cover and became Gap.
I would like to attach a Strap in case it comes off from the mount, but it is a pity that there is no hole.
The external Strap is worn.
View detail
Plating is beautiful
It holds them in place tightly.
The plating is beautiful and Large sturdy even after several years of use.
View detail
Very good
[How is it used?
I bought this because I wanted something high quality and easy to put on and take off my phone.
Was the one you received as per Image?
It was made of Cut-out of the Gold material and was as luxurious as the Image.
How was your experience with it?
The Moto Guzzi that I installed vibrates a lot, but it doesn't wobble while riding and the screw doesn't come loose. And it's really easy and comfortable to remove and install by just twisting the phone 90-degrees.
I like it because the Parts are not noticeable while in use and when the phone is removed, there are few Parts left on the body side, so it is very SMART.
[Points to note]
It is necessary to purchase the Parts for the fixation that attaches to the Smartphone Case separately. Because I use it with two cars. "MotoBundle Universal." (Part number:99576) was purchased at the same time.
In addition, because it is fixed Firmly, there is no escape of the vibration for the smartphone which is weak to the vibration such as iPhone, so it might be good to use Parts which absorbs the vibration sold separately.
How did it compare to other products?
I compared it with the product of SYGN HOUSE and Quad lock, but SYGN HOUSE was too tough and the price was high Pass.
There are very few compact products that can be tightened together with Handlebar clamp.
I think it's good that you can buy only the parts you need and not the whole set when using multiple units as I do.
View detail
It is a solid product.
Product installation:.
Because the Handlebar diameter is large, we have attached a Bracket to the Mirror to hold the product in place. It is easy to install.
Hexagonal Wrench is needed to change the direction of Clamp. The direction is not easy to change.
You don't need to move your phone much once you're oriented, but if you want to change directions frequently, you may find it inconvenient.
Removing the phone:.
Align the unevenness of the Clamp with the unevenness of the Smartphone Case and rotate it 90 degrees to fix your phone. The fixation of the phone and Case is firm, and I think that it does not come off at first. In addition, I think that the attachment of the smartphone body and the Smartphone Case is also firm and it does not come off.
Vibration-reducingAdapter:.
As a countermeasure against vibration, we use the Adapter sold by Option together.
View detail
No.1 ease of use
[How is it used?
I bought this one additionally because I use the Smartphone Case of SP CoNECTO.
Was the one you received as per Image?
You can choose the size to fit your motorcycle.
Because it is a plastic part, strength and durability are unknown, but it feels good to install.
It's too expensive to buy.
How was your experience with it?
If you use it with Stem Mount, it will get in the way near the key cylinder.
I was thinking, I can move the position, so I moved it to the lower side and used it, and it was nice without getting in the way of the Key cylinder.
[Points to note]
The mounting parts are plastic, so if I tighten them with the Oni Torque, won't they break?
How did it compare to other products?
The Stem Mount system is more SMART than the conventional bar mounting type.
However, it is not fixed with a screw, so I am only worried that it will not fly away.
View detail
First Mount (Holder)
Used in GPZ1000RX 。 Since it's an old OEM Separate handle, I didn't have that much choice, and I was thinking Handlebar Mounting, or MASTER or Mirror (with the Blind lid off), and I was torn between Quad Lock and this one.
I was worried about the short distance from the OEM Handlebar to the bolt, but I was able to install it as it is (just installed it, not running it). (I just installed it, but did not run).
I made a 3mm collar out of aluminum for clearance with the key and for future anxiety, and raised the collar about 4.5-5mm with the spring washer.
I have about 28k miles on it and so far no problems.
One.
I was hoping for another gui-mick in the locking mechanism, because it rotates with light force! 。 Well, why don't you touch it while it's running?
and the Band that comes with it is useless? Is there a different way to use it?
Many people are using it as a bar handle, but I can recommend it to NORMALSeparate handle people.
View detail
Beware of the compatibility of smartphones and motorcycles.
It's a great product, but I'm posting this because I don't want you to share the same grief as the Small job.
It won't work with the CBR650R and iPhone 11.
Maybe it's not a good fit with the CBR650R itself in the first place.
You can use it if you offset the position of the Stem installation to the top;
It would have been nice to have been able to select a few different lengths of Arm extending forward, but I can't help but notice that the ones that aren't there.
I made a long Arm in CAD and 3DPrinter and replaced it.
View detail
It depends on the vehicle type
I bought it for my VTR1000F
I chose the Stem Mount for the Separate handle
Installation is very easy
As you can see in the product image, there are 5 different sizes included in the package, so just choose the one that fits! It is
I think it depends on the car model, but in case of VTR, it may be because of the large tank Sometimes there is not much Clearance
I want to make the angle of the Body a little more, but when I point the Charge Cable, it hits the Tank It's not a good idea
This is the state that the angle is laid down in order to avoid hitting the tank when you point the charging cable
Sometimes, depending on the position of the sun, it's hard to see your phone's screen because of the glow
If you install the smartphone, the key cylinder will be hidden, so when you pull out the key, you need to remove the smartphone You have to take the
And if you install the phone with the key pointed at it, Clearance is Limit LOL
It just doesn't hit you, so it's a matter of ingenuity
View detail