JvB Moto Motorcycle Reviews

Filter

Write a review and get Webike Points!

Reviews

JvB Moto Clear all

JvB Moto

06 Nov 2022

Kedo] Stock Speedometer Offset Bracket

Fits: YAMAHA XSR700, YAMAHA XSR700

Japanese Webike user

4/5

The ability to change the position of the Meter is fulfilled, but

[How is it used?
The OEM has the Meter positioned directly above the Handlebar, which cannot be seen by simply moving your eyes and requires you to lower your head slightly.
Since I am a beginner in Motorcycle, I often check the Meter, but I found it a little inconvenient, so I purchased this product whose position can be changed to the back side.

Was the one you received as per Image?
One of the screw holes was not painted. This is not visible after installation.
The included screws are silver, and they look a little like they are floating around the handlebar, which is all black.
The Silver component that attaches to the back is just a cut aluminum plate, and the lines and writing on the aluminum plate were left intact. The lines and letters on the aluminum plate were still there. The machining accuracy was not a problem.

Was the installation difficult?
I tried to install it according to the instructions in the instruction manual (see attached picture), but the rubber bush (I think it's called) almost tore off.
Because I tried to install the cable without considering its routing, I had to install and remove the part several times.

How was your experience with it?
It is very comfortable to have the Meter come to the edge of my field of vision where I can see it very easily and check it at a glance.

[Included Parts:were they on?

[Was there anything that disappointed you?
1. some areas are not painted.
2.Screw is different from OEM (Black) (Silver)
3. the board to be applied to the back side is an aluminum board as it is, so it looks very fake.

It serves the purpose of changing the position of the Meter, so it may not be a Level to return, but I am somewhat doubtful that Motorcycle products are so Large-tasting. View detail

JvB Moto

08 Nov 2021

[KEDO] LED Headlight & Cover Kit

Fits: YAMAHA MT07

Japanese Webike user

4/5

Style is outstanding.

It is one of the options for those who want to make their MT-07 a round-eyed Spec.

Note that there are different types of Covers for different years.

Exclusive Design (same as XSR700) so it can be installed with Refreshing.

However, you need to modify the body side when you install it.
Arm holding the Harness of the Right Side near the with Handle interferes with the Cover, so bend it.
It is not so difficult if you do it with Pliers, but be careful not to break it.
Harness handling needs to be moved a bit to fit somewhat.
And the color of the Harness on the Body side is different from the Harness on the Headlight side.
Harness is not waterproof, so you need to waterproof it accordingly.

Also, the only way to adjust the optical axis is to use the screw to fix the body.
If you loosen it too much, the Body will rattle, so you'll have to tighten it up by adding a Rubber Washer or collar.

Color:Unpainted, has some BALI and dents. You can't see it from a distance even if you put it on as it is.
I left it in the hands of a PRO painter and had it beautifully matted Black.

The Instruction Manual is entirely in German.

If you have the ability to handle the above to some extent, I think you can install it without any problems.
If the above is difficult or you don't understand it, ask Shop or other people to help you.

The style is outstanding, so please give it a try. View detail

JvB Moto

25 Feb 2021

Kedo] Stock Speedometer Offset Bracket

Fits: YAMAHA XSR700, YAMAHA XSR700

Japanese Webike user

4/5

Required for Smartphone Mount

[How is it used?
This is a must-have Parts to attach the Smartphone Mount to the Handlebar Clamp.
The OEM has a Meter on top of the Handlebar Clamp, so the Meter needs to be relocated.
I can't install it no matter what I do.

Was the one you received as per Image?
It was as shown in the picture, but I had a problem to deal with the excess wiring of the Meter.
Fixed with Tie Wrap for now.
It also had a decorative plate to change the color to Stainless.

Was the installation difficult?
Simply remove the Meter and put it on.
However, please note that the Meter cannot be fixed if the screw of MeterBody becomes stupid.

How was your experience with it?
I'm a little concerned about the accelerator cable sticking, but I generally like it.

[Included Parts:were they on?
I was satisfied because it even included a decorative board.

[Was there anything that disappointed you?
There was a part that was not baked paint, so I painted it with Touch pan.
It's a Bolt hole, so it's basically invisible.

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer View detail

JvB Moto

27 Sep 2020

Kedo] Stock Speedometer Offset Bracket

Fits: YAMAHA XSR700, YAMAHA XSR700

Japanese Webike user

4/5

It was better than I expected.

Once I got used to the OEMMeter position on the XSR700, I didn't have a problem with it, but I still think the general position and the same position as the XSR900 would be better … I think it's normal.

There are few documents and reviews, and only the video of foreign countries is there, and it is difficult to do the Right fist at the time of pulling out and inserting the key in the position of Offset, when the key is pulled out and put in and out, it is cheap with the Plate of BlackSteel & hellip; etc... I was anxious, but it was much better than what I thought.
Certainly the space is narrow at the time of key pulling out and inserting, but it is not painful, and it is a better feeling than the OEM position. However, it is thought that it is hard to install Smartphone Holder etc. near the HandlebarCenterMount. The BlackSteel plate is the only one shown in the product introduction image, but the Stainless Steel reverse side plate is included and it is good for the purpose. …Well, the stainless steel plate is much better, and the meter itself is easier to read than the OEM, as it should be. ……This is the normal way to go.

The installation is a simple one, but there is no problem in the handling of MeterWiring, Brake hose, and Accelerator Wire, although the space becomes a little narrow.

The triangle shaped Pipe Bracket, which is one of the most popular products in the market, hides the Aluminum Plate with a tuning fork mark, so this was the right choice.
View detail