Reviews
Fits: MONTESA 4RT COTA, MONTESA 4RT COTA, MONTESA 4RT COTA, HONDA RTL250, MONTESA COTA 4RT 300 RR, HONDA RTL300R, HONDA RTL260F, HONDA CRF450R, HONDA CRF250R, HONDA CRF150R, MONTESA COTA 4RT 300 RR, HONDA RTL300R, HONDA RTL260F, HONDA CRF450R, HONDA CRF250R, HONDA CRF150R
Cospar good
I am running Circuit on a CRF450R MOTARDSpec. with no problems.
I don't know about the claimed effect on my torso, but I appreciate the fact that I can use the oil since I change it every other run.
View detail
Fits: HONDA Ape 100, HONDA XR100 Motard, HONDA Ape 100, HONDA XR100 Motard
Catch Tank
About quality and texture have the right components About the feeling of use Now you can relax when you start a quick drive I think I can be free from the smell of gasoline Products to buy together Required with 6mm hose option Difficulty of installation have a good explanation Cost performance and comparison with other products It's a typical catch today at a good price About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I couldn't set it up as described The engine oil cooler was installed at the installation site, so it was originally moved to the intake air container View detail
Gloves
Design, fabric and looked good, so I bought it.
I was a little worried because I thought it would be better than Small size since there was only Large size, but surprisingly, I could use it on One size with just a good feeling of usability and usability. I hope it will last for a long time in terms of durability.
View detail
new
The fingers of the Gloves I was using were torn, so I purchased new ones here. The fabric and construction are solid, and the Gloves are a wonder that my hands do not get tired. AssistPad. The design is good and I like it. View detail
Just in case.
I bought this to alleviate my fear of running out of Gas since it does not have a fuel gauge. I like the quality and feel of the product. The durability needs to be checked in the future. View detail
Easy to air out.
This is a syringe for air bleeding which is indispensable for overhaul and maintenance of hydraulic brake and hydraulic clutch. It is very efficient because it can release the air in a short time. View detail
Useful Syringe
[How is it used?
I bought this for Brake fluid. The purpose is to remove the fluid in the master cup.
I keep it in my Tool Box (not the same as a tool box).
How was your experience with it?
It comes with a Hose and is ready to use. It's well made and this one is all I need!
How did it compare to other products?
I used to wipe it off with Dustcloth, which was inefficient, but if you use it 100 times, it should be more economical than Dustcloth...! LOL!
[Points to note]
After you are done using it, flush it with water and let it dry.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Enough for the Sunday mechanic.
I bought this to use on my TZr50R Brake master Overhaul.
The deciding factor in the purchase
I was not sure if it was a three-pronged type. I bought this type because I was worried that the C-ring of TZr50R's front side brake master might not be able to be removed.
I also chose this replacement Type because it was cheap and I had used other products from Ethos Design, so I could be assured of its accuracy. (The other ones are the same color and shape, so I have a feeling it's OEM from somewhere else.)
[Impressions of using it]
First of all, I was able to take the C-ring successfully.
The tip was solid and there was no C-ring flying off in the process.
However, as mentioned above, the C-ring is quite deep, and as it was, it interfered exquisitely and could not be grasped, so I was able to use it by shaving a little.
I haven't used it on the for Shaft C-ring, but I think I can use it there without any problem.
I would like to see some improvements.
It becomes a personal thing, but because I was able to work smoothly if it was made small even if it was 0.5mm more overall, I felt that it was even better if it became Small Type.
Also, I would have appreciated a bag or Case for storage as I had nothing to put it in after the work was done and my nails would have been RoseRose.
Products compared
I compared this product with KTC's and SIGNET's Pliers. I decided to buy this product because of the function, price, brand, delivery time, etc.
When I was writing this impression, I noticed that KITACO and Professional tools are also offering the same thing, so I think it is good to compare them according to the stock status and price.
【Review】
I think it is a good product because it is easy to use, low price and can be used both for Shaft and for Hole.
I thought it would be good to compare the delivery time and the price because the same product comes out from each Manufacturer.
View detail
ETHOS Ethos Design Air Venting Syringe
I used it for Brake fluid, I don't know about Gasoline because I didn't use it. Hose outer diameter is 7mm, inner diameter is 4mm, and it's rubber, so it's stretchable. View detail
For Grom
Overall, it was a good purchase.
I thought it was easy to remove the body from the STAND by stepping on the hook attached to the saucer.
I think a Large Motorcycle would be more impressive.
Unfortunately, when working on a painted floor, the STAND weight is too light and it slides forward. (Probably because it's a round Pipe?) Mortar flooring will be large and durable.
It is the strongest when it is used with Rear stand. I think that it is enough to be able to think that it is Large strong at all even if an earthquake comes though it is an excuse.
View detail
OffMotorcycle blister prevention.
Of course, my arms go up in the air as I grip the Grip for hours at off-road races, but of course, my arms go up in the air … (crying) The base of my thumbs gets rubbed and the skin peels off (sweat)...just me?
I installed it as a precautionary measure (easy framing).
The color is, well, aside from the color, I think it's functional enough, the thickness is there? Not much? I think it's normal. I think it's somewhat blister-proof.
View detail
Smallish and Design is nice.
Gasoline Carrying Can is often martial, but this one has a nice paint job and a bit of a stylish shape. However, because the Nozzle shape is protruding, it is not the form that is suitable for carrying on a motorcycle for emergency use. Also, I am a little worried that Nozzle may be bent or broken when it is hit. I use it to buy Gasoline, which is necessary when I wake up the immobile car, so it is good. View detail
Generally, I'm satisfied
I'm using it for Enduro, not TRIAL
The fabric is firm and it's hot in the middle of summer, but can be used for the rest of the year (If you work hard in the middle of winter too... I can't.)
Design was a long time ago (laughs)
View detail
Cute Design
I couldn't help but buy it because of its cute design.
You'll need to store the Nozzle for pouring into the refueling port separately, but it's even cuter than that. It's okay.
It matches even if it's in the back of the CUB, so it's always a great companion for long tours. I am.
View detail
Syringe, which is neither good nor bad
When I replaced the Hose on the Brake, my 4 year old Syringe was in an unusable condition There was also a point, so I bought it
Unexpectedly, the large aperture size of the Horse is large, and the Kawasaki EX-4, or rather the stray car It didn't help much, as it came loose a few times during air removal
Hose is $10cm for each of the hose and $20 for each off-the-shelf corner at Home Center It's about the same, so you can just buy it
View detail
Easy to use
I used cheap products of Manufacturer unknown, but because it was hard to use, I replaced it with ETHOS.
good point
Since the rigidity is solid, even if the car body is shaken, it does not go guyagguha.
The thickness of Pipe of the handle part exactly grasps exactly and it is easy to put in force.
The movement of Caster is good and it is easy to get in under the car body. * If it is cheap, it will not move if the weight hangs on the Caster, or it needs considerable power.
The price is just right..
A bad point
Because the handle part is long, it is easy to put power, but Space is also required for that
View detail
13 valuable for NSR 250 R
I bought 13 valuables for precious NSR 250 R.
It is necessary for Gymkhana and ShortCircuit, but it is not handled by SUNSTAR or ZAM.
There is also a molded hole in the shape, it is light weighted and it is easy to organize by the difference with Cool other Sprocket.
Because I do not know durability between ☆ Three
View detail
With Affordable Size
Purchase for Grom without Center Stand.
Thanks to a simple structure and a quadruple Caster with Bearing, it lifts with a light force.
View detail
I am satisfied..
It is easy to use as usual. It looks pretty good too. The Rubber of the Mount part is also thick and relieved.
Pipe diameter is also large and secure. I do not feel dissatisfied, but I wish it was a bit cheaper ...
View detail
Hang may be there
I feel a little unstable when I raise it compared to receiving L-Type.
It will stabilize once it goes up,
If you do not plug straight in to the car body
It may be dangerous.
Texture etc etc. Is very nice.
View detail