Reviews
Easy to install, but ???.
Installation is easy, and the design fits well with the car body without any discomfort. However, I think that the reflector should be included from the beginning since ACTIVE also manufactures a reflector. View detail
The stuff is good, but I wonder if it's expensive.
[How is it used?
Along with the replacement of the front caliper, I have also replaced the brake hose. Therefore, this one will also have to be replaced.
For OEMs, the Adapter and Hose are integrated, so if the Hose is changed, the Adapter will no longer be usable.
You could say it's an exchangeable necessity.
Was the one you received as per Image?
Active's is solid and is as per Image.
The product is small, but the packaging is well made.
good impression
Was the installation difficult?
It was a little difficult.
The Hose from ABS is one that cannot be bent made of the genus Gold, so the angles are complicated.
To remove the OEM Adapter, the Right SideSide cowl and Front Fender must be removed (not necessarily young to remove, but hard to work without them).
After that, the coolant tank on the Right Side can be removed to make the work smoother!
How was your experience with it?
Same as OEM.
It's hard to say, since it's not very visible.
Since it is to be replaced along with the replacement of the hose, it is sufficient if it functions well~.
No Fluid leaks, etc.
[Included Parts:were they on?
No, sir.
[Was there anything that disappointed you?
The construction is very good, so none.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It's a Small richer one, but at such a price it's a bit expensive.
But there is no other Brand that offers something like this except Active, so this is the only option!
New ModelGSX1300R HAYABUSA needs this one if Hose is replaced!
The length of the Hose is also listed in case you are interested.
Quantity:Pair (for Left and Right) The 360mm is just right for both of them.
View detail
It certainly works.
Looking at the frame structure of the NINJA2 Helmet 50/400, it seems to me that the Left Side conectoplate is intentionally made weaker by bending it. It is my imagination, but it may be that the torsion of the frame improves mobility. The claim is that the Damper will absorb vibration and provide straight-line stability by restricting the movement here.
As it was, the ride quality was not good, so I weakened the front and rear Suspension settings by about 2Click, which I think improved the driving stability without worsening the ride quality.
I am a dull person who cannot tell the difference with a slight change, but I can certainly feel the change. It may be too much to say that the driving has become more luxurious, but I feel a sense of stability.
I am tuning the front and rear suspension with Technics or NITRON, but if you put it on a vehicle with Normal suspension, I think the original uncomfortable ride and thrust will be emphasized. However, if you use NINJA2 Helmet 50/400, it may be good for those who don't feel bad ride quality.
View detail
Instruction Manual is DAYTONA's overwhelming winner.
I realized after I bought this one that it's the same as the one Y’S GEAR puts out, just without the Reflector and Hara II's △Mark. I wasted my time wondering about it.
The instruction manual was very easy to read, and the procedure to remove the blinker was very easy to follow. I downloaded the instruction manual from DAYTONA because it was very beautiful, easy to read, and explained everything very carefully. If I had referred to the instruction manual from the beginning, I could have done the work in 30 minutes, as described in the description of the product.
The product itself is very stylish with good quality and no rattling after installation.
But the price is also expensive… I think the satisfaction is high but the cosmetics are subtle.
View detail
Dress-up rather than function!
High Solo, but I installed it to change the color and routing of ThrottleBody and Wire.
As for the installation, it was a little Large strange because I didn't know how to make detailed adjustments.
Result WireQuantity:I made a Layout with 2pcs to sandwich the Brake lever for a better look.
View detail
good-looking
The clutch lever was replaced for a certain reason, so this one was replaced as well. It looks good and looks high class. However, I feel the movement is heavier than the OEM lever. View detail
good-looking
The OEM lever was not bad looking and we were going to use it as it was, but when we pulled it inside the handlebar to install the USB power supply, the bent part of the lever hit the switch box and the clutch could not be cut off. The interference with the switch box was reduced a little and it looks more luxurious, but I think the operation is heavier than the OEM one. View detail
Lack of color extension
I put it on my CBR600RR (PC37 late model).
If you have basic tools such as Plus/Slotted screwdriver, pliers, etc., the installation should be large and sturdy.
I googled how to remove the inner weight and used a slotted screwdriver to forcibly remove it.
The Grip was an Active Grip, but it was either too long or the two collars that came with the Grip were too long.
I thought about cutting the Grip because the Throttle was reluctant to move without dodging.
I found an aluminum drain bolt (1mm or 2mm thick) that I don't use in my car that fits the diameter.
We are cutting it down and adding to it.
DAYTONA's Radial master cylinder and DAYTONA's Brake lever (standard length) are just barely 2
It was so hard to hit.
The product is solid and I will use it thankfully.
View detail
Fits: HONDA CB1100, HONDA VFR800X, HONDA VFR1200X, HONDA VFR800F, HONDA CB1100RS, HONDA CB1100EX, HONDA CBF1000F, HONDA CB1300SB, HONDA CB1300SB SP, HONDA CB1300SF, HONDA CB1300SF SP
The grip width can now be fine-tuned.
It is a replacement from U-KANAYA lever as well as Brake lever.
I was able to adjust the grip to the best width after replacing it with STFLever, because it felt far away from my palm even after making the smallest adjustment with the previous Lever. At the same time, I replaced the Dust Boots of the Clutch Mask Cylinder because they were torn.
The feeling of use is closer to the Clutch connection when it is aligned with one's palm.
View detail
Fits: その他
Exclusive products are ultimately safer than Universal Products
The Ceramic resistor part of the LEDNumberSIDEBlinker made by ACTIVE was damaged and became a high flasher, so I bought it for repair. I am glad to know that I can install it easily! I would be happy if ACTIVE would continue to sell Repair Parts. View detail
I used it on my GPZ900R.
I bought this for High SoloWirefor replacement on my GPZ900R. I have been using StainlessBracket for a long time, but I bought StainlessBracket again because it is less likely to rust. The price is higher than before, so I give it 4 stars. View detail
Fits: HONDA REBEL250, HONDA REBEL250S EDITION, HONDA CL250
I'm almost satisfied.
Exhaust system was changed from front pipe to MORIWAKI.
The vibration and other factors had already been improved because of the replacement of the
Frankly, it was hard to tell the effect.
Speed at which strong vibration occurs at high speeds is 3 to 5 km/h
I think it has grown.
I definitely felt that the rigidity of the Frame was slightly increased.
I have seen the video etc., and it has a very good reputation.
The more novice you are, the less likely you are to expect too much.
I am sure we will see the effect after long-distance, high-speed driving, etc.
I did the installation myself, but it is definitely better to have a store do it for normal people!
There is a high TorqueBolt attachment and removal of Engine Jack-up and Engine hanger bolt.
There is Torque management, and a reasonable selection of tools, including a hexagonal box wrench,
It would be difficult without knowledge.
As for the look, it is very good as it attaches to the lonely Engine surroundings.
It would be better if there was a Plating Specification or something like that.
View detail
Fits: HONDA X-ADV, HONDA NC750X, HONDA CBR650F, HONDA CBR650R, HONDA DN-01, HONDA NC750S, HONDA CB400SB, HONDA CB1300SF SP, HONDA VFR1200X, HONDA NM4-02, HONDA NM4-01, HONDA CB400SF, HONDA CBF1000F, HONDA CB650F, HONDA CB650R, HONDA VFR800F, HONDA VFR800X, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS
Fine-tuning is now possible.
The lever for adjusting the grip width of U-.KANAYA's billet lever had stuck and was no longer adjustable, so I replaced it with a Dial adjustable ActiveSTFLever. It is foldable, so there will be less damage in the event of a fall. The grip is also comfortable. The Neck is more expensive. It seems that you can buy one set of U-KANAYA Lever for about the same price. View detail
ACTIVE Reflector
Slim type Reflector.
It's a shame that the Bracket was twisted when installed and was not slightly straight.
View detail
Can be installed without modification on the '24 model, but the side reflector needs to be relocated.
This will be a reReview
In my previous post, I wrote that there is no problem to install the side reflector on the 24-year model, because the angle is Japanese Vehicle Inspection Correspondence. However, due to the revision of the Motorcycle Safety Standards, side reflectors are mandatory for new model vehicles certified by the Japanese government after September 2023.
The 24-year ZX-6R is compliant with this safety standard, and since the side reflector is installed on the rear fender, if the Fender Eliminator Kit is installed, the side reflector will not be installed, and the vehicle will not pass inspection due to non-compliance with safety standards when used on public roads. If the Fender Eliminator Kit is installed, the side reflector will not be installed, and the vehicle will not pass inspection due to non-compliance with safety standards when used on public roads.
Since it seems that it is only necessary to have it on either the front or rear, I am arranging for the side reflector to be relocated to the front fender as in the for International Model.
View detail
![Aluminum Throttle Holder [EVO2]](https://img.webike-cdn.net/catalogue/images/33257/1060356_1060358_TS.jpg)
YZF-R25 (installed in 2019)
The High Throttle Kit with 52Φ Bracket and Large Holder was originally installed on the vehicle I purchased, but the throttle was too heavy and tiring, so I changed it back to Normal, but decided to replace it with 42Φ and changed the Holder I decided to replace it with 42Φ and also changed Holder to Small.
The installation itself is easy, but since the Right SideSwitch box is also replaced at the same time, the tank must be removed. That was the strange part of the installation.
View detail
Purchased for Brembo.
Purchased because the length of the banjo bolt that came with the 19RCS did not fit.
I wanted Stainless anyway, but I can't spend over $1000 for Bolt lol.
It is for Brembo and can be used without any problem.
View detail
Concept is the best!
The position of the OEMB blinker on the Ninja 250SL is not good anyway (the front side cracks when it rolls over standing up, and the rear side cannot carry a side bag). I was wondering what to do with the Rear blinker, and after much deliberation, I decided to purchase this product. I'm not sure if it's a good idea to use a "Paste Type" blinker, but it's a good idea to use a "Rear Blinker" blinker! View detail
Used for frando 7nb
[How is it used?
I used this service for frando 7nb.
Since the shape is identical to brembo, it could be used as is.
Was the one you received as per Image?
The color of Gold was a little strong, but it was not a problem.
Was the installation difficult?
A Pin to pull out the existing Knob was also included and was easy.
Need something to hit, such as Hammer
How was your experience with it?
Beta pin was loose and rattled a bit, so will replace it with a pin I have on hand.
[Included Parts:were they on?
Perfect with Pin to pull out included.
[Was there anything that disappointed you?
The rattles are a little bit large and might be a problem for some.
However, I am using it for frando 7nb, so maybe it is different when used for GALE SPEED or brembo.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
None in particular
View detail
Exquisite even if the Position is fixed. (^^)
Originally, it was designed to fit 400 (or 250 depending on the model year). Separate Handle Kit from Active that fits.
However, this chassis had a Bikers Separate Handle Kit installed from the time of purchase, but it was wobbly even when the fixed bolt was tightened, and I wanted to set the position a little lower, so I purchased the kit even though it was not applicable.
The front fork diameter is correct for now, so it is easily installed, but the part where the brake hose comes out from the OEMMASTER is cowl (^^;)
So, subtly move the Brake lever up.
Still, when the Handlebar is cut to full Left in the Hose section, there is a Stress in the Hose (^^;;)
So, for now, we are going to replace it with a NISSIN radipon to make it easier to maneuver the Brake. (^^)
The NISSIN radipon is 17mm and OEM same etc., and I was able to install the Throttle Wire and Brake Switch without any hindrance.
View detail