Reviews
Fits: DUCATI 899Panigale, DUCATI 1199 Superleggera, DUCATI 1199Panigale S/Tricolore, DUCATI 1199Panigale, DUCATI 1199Panigale R, DUCATI MONSTER1100EVO, DUCATI MONSTER 1200R
Custom in Red color Bartz
Black color body in Custom with Red color verts.
Since the Barts are only four Smallish Anodized Screws from Windshield, they don't look much different.
Naturally, there is no change in driving.
It was an investment for complete self-satisfaction, but even a small investment like this will make a difference as it accumulates.
View detail
Fits: DUCATI PAUL SMART1000LE, DUCATI Multistrada 620, DUCATI Multistrada 1100/S, DUCATI MONSTER900, DUCATI MONSTER1100/S, DUCATI MONSTER S2R1000, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100/S, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER S, DUCATI SPORT1000, DUCATI SBK 916 1994-99, DUCATI Multistrada 1000 2003-06, DUCATI MONSTER S2R, DUCATI 999, DUCATI 998, DUCATI 996, DUCATI 749, DUCATI 748
Clutch Spring, to fix Retainer
The bolt that holds the clutch spring and retainer in place was damaged, so I replaced it with this one. I used this bolt on a 94 M900 with no problems. View detail
Used for Demon150GR
[How is it used?
Demon150GRFrame Hole Cap, used as.
Was the one you received as per Image?
I have seen Frame Hole Cap replacement often in Thailand, the home of Demon150GRCustom, but I don't know which one is available,
Once again, we sought out Universal Product and took on a human-pillar challenge!
First of all, it was important to know if it would arrive or not, so I measured the size at Caliper and bought one to try it out.
I found it to be usable and ordered more for the other side, but was disappointed to find that the inside of the Wrench hole in the second item I ordered was rusted.
I gave up on returning and exchanging the product because I had to wait several months after ordering, but if the rust continues to appear, I will look for a separate Screw only.
The texture of the aluminum cut-out part is high, and the design is simple and nice.
"MADE IN ITALY" notation increases Tension.
Was the installation difficult?
The OEMPlastic cover of the Demon150GR is only held in place by tabs, so it can be easily removed by pulling it off and replacing it.
Type of size adjustment by tightening the screw, which collapses the rubber.
Can be mounted with Bolt On.
How was your experience with it?
Compared to the OEM Product, I like the increased sense of quality.
Anodized Black has a duller shine than OEM Product's chunky resin caps, which is exactly what we were aiming for.
This product is available in a number of Sizes, so if you can find one that is circular and fits the Size, it is worth a try.
I am using another Size of Gold for CYGNUS-X as well.
[Included Parts:were they on?
The product is only in the blister pack, there are no design documents etc.Included Parts:.
[Was there anything that disappointed you?
It is Rust in Screw. Other than that, it's perfect.
If I had to say so, I would say that it is difficult to change the bolt color because the screws are silver Hexagon Socket Countersunk Head Screws.
If possible, Bolt is also someone who would like to change colors.
View detail
Fits: DUCATI SUPERBIKE Panigale V4 R
About Quality
The appearance and ease of investigation are not a problem, but the length of the terminals of the connector with the vehicle harness may be uneven, and the response of the button is sometimes poor.
Also, since the two outer buttons hit the throttle housing, there is a limit to how far outward you can push the brake lever, so I felt that the Blue and Green buttons should be spaced about the same distance as the Red and Black buttons to allow for a wider range of mounting positions. The position of the buttons could be more flexible.
View detail
Dress-up of Monster937
The Monster 937 has a lot of plastic covers around the engine, so I bought this to dress-up the look a little.
The texture is good, but I think it would stand out a little more if the Carbon weave were larger (it's a rather fine weave).
Since these parts have nothing to do with performance or usability, the more conspicuous they are, the better.
Installation is easy. Simply peel off the cushioning material (sponge) from the removed Cover, attach it to Carbon's Cover using double-sided tape, and fasten it with three screws.
However, the position of the screw hole is fine, but the screw hole is a little distorted, and the screw could not be inserted unless the hole is widened with a file.
I don't think it is a Large problem because it is only a very small one.
You don't notice how it looks unless you are told? I think it's about the same.
It seems a little expensive for what it is.
Well, it's a world of self-indulgence.
View detail
Fits: DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
CarbonRadiator guard is cool!
The Radiator guard in carbon looks great, and the bare aluminum color of the NORMAL does not match the black body, so I bought it and installed it.
The texture of carbon is very good, but as expected of IRA Rear, there is some distortion and the chili width does not match.
Don't worry, it's not noticeable at all with the YAMAHA Super JOGZr Wing Black in the foreground!
View detail
Fits: DUCATI DIAVEL, DUCATI DIAVEL
No problem
OEM goods corroded by OIL!
I replaced it because it looked bad.
I had seen other makers, but CNC was simple and I liked it.
So far, I have been able to use it without any problems.
Self-satisfying!
View detail
THESimple
It's not bad.
I think the Ducati Performance is better looking design-wise...
Pricey!
Once installed, it is simple and comfortable, but a little sad.
It is good for those who like simplicity.
View detail
Unique shape for good visibility!
There was no Instruction Manualetc. included, only this product and Included Parts:on the box.
I was concerned about the accuracy of the Bullet Terminal, so I replaced it while wiring.
I am satisfied that it lights up without any problem.
The Position light is off when the Blinker is on.
View detail
Fits: MV AGUSTA RIVALE800, MV AGUSTA F3 800, MV AGUSTA DRAGSTER 800RR, MV AGUSTA DRAGSTER 800, MV AGUSTA BRUTALE800RR, MV AGUSTA BRUTALE800RR, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE675, MV AGUSTA F3, MV AGUSTA F3
Easy to use
It takes a little bit of time to operate when canceling from R to L. The rest is very easy to use. View detail
Tank pad
First, the delivery time are acceptable since I have purchased other product which is not in stock. The packing was good as usual. The tank pad is very nice product and it's easy to install. Overall, I 'm very satisfied the services and will come back here for purchasing View detail
Fits: DUCATI MONSTER 1200, DUCATI MONSTER 1200R, DUCATI MONSTER 1200S, DUCATI MONSTER 821
Good appearance.
It will look so much better. 。 However, I wanted the washer to be included. View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-10, APRILIA CAPONORD 1200, APRILIA DORSODURO1200, APRILIA TUONO V4 1100 Factory, BMW F800GS, BMW F800R, BMW R1200GS, BMW R1200GS Adventure, BMW S1000R, BMW S1000RR, DUCATI DIAVEL, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100/S, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD821
It might be a good idea to replace it with a bar end mirror.
I think the price is a little high.
It is necessary to seal the OEM mirror hall to replace the bar end mirror, but I think it is also necessary to fix the MONSTER S2 Fluid Tank with a mirror hall.
Material:Because it is aluminum, there is a high likelihood that it will be tightened with too much force or licked during removal.
This is the second time I have purchased this product, but it was licked on removal and needed to be replaced.
A little It will be dressed up around the Handlebar.
I have purchased Red before and this time I chose Red again.
View detail
Fits: DUCATI XDiavel, DUCATI STREETFIGHTER848, MV AGUSTA F4 RR, MV AGUSTA F4 RC, DUCATI STREETFIGHTER S, DUCATI Multistrada 1200S, DUCATI STREETFIGHTER, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Granturismo, DUCATI Multistrada 1200, DUCATI Multistrada 1200 Enduro, DUCATI MONSTER1100EVO, DUCATI MONSTER1100/S, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER 1200, DUCATI DIAVEL, DUCATI 999, DUCATI 848EVO, DUCATI 848
Accent around Handlebar
I bought the Red color for the accent around the handlebar.
I chose the 150mm Short because it would not be damaged in case of moss.
I think the installation is normal.
The short design makes it feel a little heavier in the grip than the OEM model, but this is not a problem if adjusted with the adjuster.
The Adjuster has 5 levels, so you don't have to think about the Large size of your hand, and it is Large sturdy.
The instruction manual is the same for all CNCRACING products, but the simplest one is "Quantity:I think it came with 1pc.
I think it has been in use for over 2 years and there is no fading of the Anodized.
View detail
Fits: DUCATI MONSTER 1200S, DUCATI MONSTER 1200R, DUCATI MONSTER 1200, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100/S, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI XDiavel, DUCATI STREETFIGHTER848, DUCATI SS900, DUCATI SS800, DUCATI SS750, DUCATI SS1000, DUCATI PAUL SMART1000LE, DUCATI Multistrada 620, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring
I think Clutch has lightened up a bit.
I bought this one with a slightly larger diameter than the OEM one because it is very hard on my Left hand when I frequently turn off the Clutch in town or in traffic.
The installation was done by Dealer.
Instruction Manual is a CNCRACING product, so a simple one is Quantity:1pc. was.
It has been 3 or 4 years since installation and there is no fading of the Anodized.
After installation, Clutch seems a little lighter, but you will be disappointed if you expect it to be much lighter.
View detail
Fits: DUCATI 1098R, DUCATI 1098, DUCATI 1098, DUCATI MONSTER 1200, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI STREETFIGHTER, DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 1299 Panigale S, DUCATI 1098S, DUCATI 1098S, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1199Panigale, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI MONSTER 1200S, DUCATI MONSTER 1200R
Repurchased.
I repurchased the Nut to replace it along with the Sprocket and Chain exchange.
Material:Since it is Aluminum, I decided to replace it because I knew it would get scratched when replacing the Sprocket. It had faded and I think it was just the right choice.
I think I will replace the Nut in the future when I replace the Sprocket, so I rate the cosmetics as low.
It would be good for a small dress-up of the footwear.
View detail
Fits: DUCATI 1098S, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1098, DUCATI 1098R, DUCATI 1098, DUCATI XDiavel, DUCATI XDiavel, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER S, DUCATI Multistrada 950, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200, DUCATI Multistrada 1200S Granturismo, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200 Enduro
A little dress-up
The rear sprocket, flange, and flange cover had been replaced with CNCRACING ones, but the flange nut was OEM, so the flange nut was replaced as well.
The work was done by a Dealer because I don't have many tools, etc.
Since it is a Flange nut, there is no need to change it unless the Flange is replaced.:Aluminum, so it should be replaced at the time of replacement.
Other products from CNCRACING with Red Anodized paint do not fade mysteriously, but this Nut has been in use for about 6 months and I think it is fading.
It is good for a little dress-up.
View detail
Fits: APRILIA Tuono V4 1100 RR 17-18, DUCATI PANIGALE V4 S, DUCATI 1299 Panigale S, DUCATI 1299Panigale, DUCATI 1199 Superleggera, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1198S, DUCATI 1199Panigale, DUCATI 1198, DUCATI 1098S, DUCATI 1098R, DUCATI 1098, DUCATI STREETFIGHTER S, DUCATI STREETFIGHTER, DUCATI Multistrada 1260S, APRILIA RSV4, APRILIA TUONO V4 1100 Factory, DUCATI MONSTER 1200R, DUCATI Multistrada 1200S
I was looking for it.
It was the product I was looking for, so I was glad to find it in WeBig. View detail
Fits: DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S, DUCATI SUPERBIKE Panigale V4, DUCATI SUPERBIKE Panigale V4 R, DUCATI SUPERBIKE Panigale V4 S
Fitting is no problem!
As you can see, it is a Hook for Tie Down.
It can be used with OEMTandem Footpeg, but the parenthesis will be worse.
View detail
Fits: DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI SUPERBIKE Panigale V4 R, DUCATI SUPERBIKE Panigale V4 S, DUCATI SUPERBIKE Panigale V4, DUCATI SUPERBIKE Superleggera V4
Expected performance is avoiding stepping stones
I really like EvoTEC's product with the same functionality in terms of design, but the color I want is not in stock at the head office, eBay has it but the price is double the standard price …, the EvoTEC distributor in Japan does not seem to want to do business and it is difficult to get one at the moment, but without one my oil pan is damaged by stepping stones, so I bought one. But I bought it because the oil pan is damaged by stepping stones without it.
This product from CNCRacing is cut-out from solid aluminum, and although it seems strong, it is heavy without much wall cutting.
View detail