Reviews
Fits: YAMAHA BirdCity125, YAMAHA NMAX 125 [EBJ-SE86J (2DS2) ], YAMAHA NMAX 125 [2BJ-SED6J], YAMAHA NMAX155, YAMAHA Tricity155
air filter or camouflage exhaust
many people keep asking me the same questions.is this an exhaust or did it has twin muffler. what an air filter whom made people got wrong guessed. View detail
Large strange
Quantity : We purchased 2 pc and installed 1 pc each on the engine oil inspection window lower side and water pump side. Engine braking became Mild, Shift was also replaced with Smooth and Engine oil (Usually 3000 km) Shift change is Smooth even after past. View detail
Large strange
We already installed several places. This time, I bought it for Front Fork. Anyway, it's easy to install, I think that it is a product that you can experience quickly View detail
Large strange
I installed it in Throttle valve. Especially the ruggedness improved (Some people may be too sensitive) And above all, there is no valley in the low revolution range and I am satisfied with TorqueUpLarge. View detail
Fits: YAMAHA MAJESTYS, YAMAHA SMAX (SG52J), YAMAHA SMAX (SG28J), YAMAHA SMAX (SG271)
Processing is Large strange.
Changed from DugoutFender Eliminator to AIO.
Because the position of Number and Blinker's position were ideal for AIO.
Regarding installation, it is a storm of processing and fine adjustment .... It is cool if it is followed and there is satisfaction.
Also, the manual is too much About and the picture is hard to understand with WhiteBlack! It is better to refer to blogs carefully putting on Net and movies attached to YouTube.
Actually installing and processing, Rear Fender's processing is manual duty at Cut as ordered, but I also feel that it is better not to do Cut of Under Cover according to the instructions.
Under Cover can handle Cut only enough for the part corresponding to Number. I feel cut off when I cut it according to the instruction manual. From the back side it's all you want to enter rain with sky ska.
I used the waste material of Cut for the time being I buried the gap ...
This product is recommended for people who are familiar with Custom. Or you should leave it to Motorcycle shop.
View detail
BW'S125(SEA6J)
I think that it is a very good product.
It is very convenient when stopping on a little slope.
Parts for the new BW 'S 125 are still few, so it was a nice product to be released.
View detail
Mounting on CYGNUS X
Rear surroundings refreshed.
The manual is small and it is very hard to see.
It is appreciated that we can reuse OEMFender as it is.
Drilling is necessary to install Reflector.
In terms of Cost I think that it may be a little cheaper, but I was satisfied accordingly.
View detail
Fits: HONDA PCX125 JF28, HONDA PCX125 JF52, HONDA PCX125 JF56, HONDA PCX125 JF81, HONDA PCX125 JF84, HONDA PCX150 KF12, HONDA PCX150 KF18, HONDA PCX HYBRID 2AJ-JF84
Installation is very easy.
PCX (JF56) I installed the Brake stopper. Installation is very easy, it will not take 5 minutes.
It is convenient something because it does not have to grasp Brake in the traffic lights. I think that it is a good product even with NORMAL.
★ 5 if the price is cheaper a little, but ★ 4 in terms of COSPA.
View detail
Fits: YAMAHA CYGNUS X (SE44J) Japanese specification 1YP, YAMAHA CYGNUS X 02- (SE44J) Japanese specification 1YP
It is convenient to have it
CYGNUSSR (1YP) It attached to.
【What made you decide the purchase?】 Because it was attached to the original moped rice so it was convenient.
【How was it actually used?】 A sense of security at an incline stop location and signal wait increases.
【Was it difficult to install? (Hard parts case)】 It takes time and effort to remove the light cowl and some special screws are used or the nails are hard etc etc. There is, but the work itself is not too difficult.
【Please tell me the point of installation and hang (in the case of Hard parts)】 You can stop using Lever's Bolt, but Bolt did not go into Smooth unless you trim a little bit of Body's corner. (Maybe individual difference as it is slight?)
[Is there anything I was disappointed about?] Currently it is unavoidable that this product can only be installed in CYGNUS, but I think that the price is a little high, although it is not a particularly difficult structure.
【Hope for Manufacturer - Please let me know if there are any improvement points】 When thinking about the price, I think that it is better to use a thicker iron plate for better rigidity and Plating use.
【Have you compared items?】 There was nothing to be attached other than this product.
[Others] Because it is slightly different from 2013 and earlier in type, purchase after confirming the model number well when purchasing.
that's all
View detail
Fits: HONDA PCX125 JF28, HONDA PCX125 JF52, HONDA PCX125 JF56, HONDA PCX125 JF81, HONDA PCX125 JF84, HONDA PCX150 KF12, HONDA PCX150 KF18, HONDA PCX HYBRID 2AJ-JF84
Very good product, easy to assemble in 2 minutes. useful and practical. Good product, very easy to mount in two minutes. and easy to use. PCX Rider FR
Very good product, easy to assemble in 2 minutes. useful and practical. Good product, very easy to mount in two minutes. and easy to use. PCX Rider FR View detail
Fits: HONDA PCX125 JF28, HONDA PCX125 JF52, HONDA PCX125 JF56, HONDA PCX125 JF81, HONDA PCX125 JF84, HONDA PCX150 KF12, HONDA PCX150 KF18, HONDA PCX HYBRID 2AJ-JF84
If Brake-lever exchange can be performed, I will think that attachment is easy. appearance is also comfortable. A hand can be lifted from a Brake by the waiting for signal, etc., and convenient in it being unexpected. However, I think that th
If Brake-lever exchange can be performed, I will think that attachment is easy.
appearance is also comfortable.
A hand can be lifted from a Brake by the waiting for
signal, etc., and convenient in it being unexpected.
However, I think that the place to which a finger is applied is somewhat far.
View detail
Fits: YAMAHA CYGNUS X 13- SE44J (Japanese specification1YP), YAMAHA CYGNUS X SR 13- SE44J (Japanese specification1YP), YAMAHA XC125 XC125 SE465J (Taiwan Spec.), YAMAHA XC125 XC125SR SE465J (Taiwan Spec.)
A price is also handy and structure is also solid. attachment is also easy. The circumference of rear felt it refreshed. The splashes of mud of , however the rainy day are carried out to a sheet part...
A price is also handy and structure is also solid.
attachment is also easy.
The circumference of
rear felt it refreshed.
The splashes of mud of
, however the rainy day are carried out to a sheet part...
View detail
Fits: HONDA PCX125 first model (JBK-KF12), HONDA PCX125 first model (EBJ-JF28), HONDA PCX125 Late Model (JBK-KF12), HONDA PCX125 later model (EBJ-JF28)
Although a high grade feeling may suit as PCX, there is slightly regretting about an Opening of a sheet. I think that this product is goods good for compensating it. attachment is also messy -- it is easy. Although it will be large satisfactio
Although a high grade feeling may suit as PCX, there is slightly regretting about an Opening of a sheet.
I think that this product is goods good for compensating it.
attachment is also messy -- it is easy.
Although it will be large satisfaction when a price is 2 or about 500 yen if
difficulty is said.
View detail
Fits: HONDA PCX125 first model (JBK-KF12), HONDA PCX125 first model (EBJ-JF28), HONDA PCX125 Late Model (JBK-KF12), HONDA PCX125 later model (EBJ-JF28)
O Even if it does not make straight and the Handle which prevents a sheet from being flapped by good point and strong wind, and falling, using mind and the Helmet holder which exists pure are not in Seat-lock release
O Even if it does not make straight and the Handle which prevents a sheet from being flapped by good point
and strong wind, and falling,
using mind and the Helmet holder which exists pure are not in Seat-lock release (a few is raised upward) until sheet opening and closing possible
O point [ bad ]
- Get used (with [ since it is intact ] no problem).
View detail