Reviews
Bakugan!
The cheaper the price, the tighter the welds at the joints.
MORIWAKIBean-jam-filled wafers before the change (Monaka) I had it on, but it is a Japanese Vehicle Inspection Correspondence.
The sound was quiet.
I like this Exhaust System because it is a blast.
I don't think it will pass inspection.
View detail
LED Tail Lamp
I purchased the Tail lamp to use LEDs.
It would have been fine to replace only the License Plate Light with LED, but since the ZEPHYR is integrated with the Tail Lamp, we replaced it with an assembly.
I think the LED Tail is a recommendation because it gives a very custom look and is also highly visible to following cars.
View detail
![[Product Of Z-Father] Blue Windshield](https://img.webike-cdn.net/catalogue/18969/001013000044_TS.jpg)
Fubo / Windshield
Windshield, does what it was made to do and looks cool doing it. Installation was easy and straight forward, Doesn't come with directions. View detail
Fits: SUZUKI BANDIT250 GJ74A, SUZUKI BANDIT250 [Bandit] GJ74A, SUZUKI BANDIT250 [Bandit] GJ74A
For a low and wilde style!
It is White Gel Finishing and must be painted
Spray and Urethane in Primer surfacer and Black metallic [Color] I painted it in Clear
After installing the Bracket, bolt the Under CowlBody to the Bracket It is completed
The space underneath the Engine fills up and it looks low and Wilde!
It went well with the Bikini cowl I was wearing earlier, and it was a great style
View detail
Cospar good
Making is somewhat rough, but it is a good product when considered from the price
In fact there was no Red Reflector with an outer diameter of 60 cm and even if I ordered from the Parts List of GS 1000 S, I gave up because the Yellow color arrived but I found it by chance and immediately bought it
Yahoo! Auction etc. But occasionally I sell Red Reflector but I do not have Size or much less much for GS 1000 S
Those who adhere to OEM I think that it is better to avoid those who stick to quality
I think that there are many people who want to turn it to other parts rather than expensive gold to say so privately But it seems to be a good part for anyone who says so
Personally I'm satisfied with Large
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
It looks nice
I think that this product looks good as well as make and weight feeling is good. Installation is easy and OEM is 3 Screws, but this part is ScrewQuantity : It is 2 pc stop. I thought that it would have been better if the back was slightly lower if there was one dissatisfaction. View detail
Fits: YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250
Refreshing!
I removed OEM's Fender and installed my own Aluminum Mud Guard but it is purchasing to refresh the Tail lamp. Because it is Exclusive Design, precision such as Bolt position is perfect, but other Company Product is for Style emphasis or stair emphasis compared to OEM Product It is necessary to take measures against rain.
Spec. I think the appearance also became lighter as the Tail lamp can move.
View detail
[ -- the Webike Monitor ] -- since the product of this Manufacturer seemed to be the strongest, it purchased. However, since the Muffler was changed, pains were taken to insert in a left-hand side Nut. I also regard the Washer as two sheet
[ -- the Webike Monitor ]
-- since the product of this Manufacturer seemed to be the strongest, it purchased.
However, since the Muffler was changed, pains were taken to insert in a left-hand side Nut.
I also regard the
Washer as two sheets being insufficient.
Although the Review that the
Water Hose is crushed was seen by somewhere, I think that the position which it probably lets pass is mistaken.
(Some are pushed) After
attachment is firmly carried out by touch that it remains unmoved.
A Crankcase will be protected.
View detail
Fits: HONDA HORNET250, HONDA HORNET250 [Hornet]., HONDA HORNET250 [Hornet].
Some Radiator hoses and Side-stands portions are only deleted at the time of attachment. I am a Red as the rest is applied to a favorite color.
Some Radiator hoses and Side-stands portions are only deleted at the time of attachment. I am a Red as the rest is applied to a favorite color. View detail
In order that left-hand side Switch BOX might interfere, it attached contrary to original wearing. since the direction of CB750 has a little large Pitch of the tapped hole -- with Pons -- it cannot do (only a hind Screw is tightened) -- it is pleasin
In order that left-hand side Switch BOX might interfere, it attached contrary to original wearing.
since the direction of CB750 has a little large Pitch of the
tapped hole -- with Pons -- it cannot do (only a hind Screw is tightened) -- it is pleasing in the atmosphere UP.
Especially in the direction only for
vehicle type, it is recommendation.
Although the
price is by no means cheap, the circumference of an Engine becomes a Race ish.
View detail
Very well made. I hope it won't rust. Instructions are only in Japanese, and photos are very small and b/w. Some modification required as the top metal attachment sits about 5mm too far back so the plastic fairing does not line up with the back lug hole
Very well made. I hope it won't rust. Instructions are only in Japanese, and photos are very small and b/w. Some modification required as the top metal attachment sits about 5mm too far back so the plastic fairing does not line up with the back lug holes and front screw holes, once you bolt everything together. There are long or lengthened holes for the lower main steel piece which are not necessary. The upper piece should have the long holes so that mount can be slid back to align the fairing. Also when fitting the tail light, note that the original fender plastic is thicker than the steel. You cannot use the original alloy inserts that sleeve the mounting bolts. Just use the large washers provided with the kit. Overall, very well made, looks fantastic, but not immediately bolt on for Kawasaki Zephyr 750 C1 View detail
[Use vehicle type] Kawasaki ZEPHYR chi Although the 2008 model [reason for use] friend uses, Since it exchanged for the Undercowl of the other company, when it will get if it can equip since it does not Use, and temporary wearing wa
[Use vehicle type] Kawasaki ZEPHYR chi Although the 2008 model
[reason for use]
friend uses,
Since it exchanged for the Undercowl of the other company, when it will get if it can equip since it does not
Use, and temporary wearing was carried out, there was some
interference, but since it was able to equip when deleting some, it obtained.
Since the
[processing]
and a Muffler interfered a little, shaving was required.
It is better to be by mind of also deleting the object for vehicle types, since it interferes by the
[evaluation]
and a Muffler.
Although it was
and a smallish Undercowl, since !!
extravagant had not used a Makeover perfectly, it became smart shapely.
A price is cheap to the Undercowl of
and the other company.
cautions: Since the Engine lower part is not covered, Circuit use cannot be performed.
It is an object for Fashions to the last.
View detail