Reviews
Fits: HONDA CB300R, HONDA CB125R, HONDA CB250R
It's difficult, isn't it?
I put Meter's Film on the new car.
I thought it was no different than GlassFilm for cars.
He applied it with a mild detergent.
Eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee dust ・・・・ tears
That's a tough one.
I wouldn't worry too much about it since it's for Meter Protection purposes.
Fortunately, it is expensive and contains two different types of films.
I'll try again next time.
You must be a PRO to be able to do this so beautifully.
View detail
Fits: KTM 790 Duke, KTM 890 Duke, KTM 890 Duke R
Anti-winding effect.
I bought it on a friend's recommendation because the Small stone was winding up badly. Fitting is fine, and if you say it's OEM, it is. On the other hand, it doesn't have a luxurious feel, and I would be more satisfied if it were a little cheaper. View detail
Fits: HONDA CBR1000RR FIREBLADE, HONDA CBR600RR, HONDA CBR600RR
For Meter Protection
Purchased for Meter protection as per Title
It came with two sheets, AntiglareType and Super clearType, and I thought it would be nice to be able to choose the one I prefer.
Antiglare was selected for this project and Super clear was kept as a spare.
The accuracy is a little low and some parts are not fully covered, but it is acceptable. The view is not particularly different.
View detail
Fits: YAMAHA MT-07
Exclusive products are nice!
I purchased the Motorcycle right after I took delivery of it and put it on.
I was able to install it before the small scratches started, so I bought it later.
I felt it was a good product to have!
View detail
Fits: YAMAHA MT-07
Second purchase
Repurchased because after a year from the last one, it gradually bubbled and peeled off from the edges.
Originally, it was already Quantity:1pc. so I don't have to buy it yet, but in my case, thatQuantity:1pc. wind blew it away so I had to repurchase.
View detail
Fits: KAWASAKI H2 SX SE, KAWASAKI H2 SX, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000GX
For LCD protection
Quantity:First of all, you have to wonder which one to put on the 1 Set of 2pcs.
Antiglare was selected because it is often run during the day.
It is not so difficult if you follow the Instruction Manual carefully.
View detail
Fits: Others
No problem for now.
I bought a KaEdia Heller Socket from Amazon and after 2 years the contact went bad, so here it is.
Large than KaEdia, but slightly Plus in both size and weight.
It works fine on the tiger TIGER800 and so far the contact seems to be Large sturdy.
However, the LED is always on and glows, so I would not leave it plugged in.
The fact that they have to be removed when finished using them may cause them to be pulled out and inserted more often, which can quickly spoil the contact.
I read in other reviews that the lid is too small, but it is a waterproof lid.
If you screw it in with force, it will fit snugly.
However, the lid doesn't seem to be of much use because it can't be left plugged in.
View detail
Fits: HONDA 400X, HONDA CB500F, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR500R, HONDA CBR650R
It was applied beautifully.
I have a HondaCB650R 2023 and it was Exactly. I think it was applied beautifully without any bubbles. View detail
No discrepancy in design.
Easy to install, no design discrepancies
I use the double-sided tape provided. (Shown on the Right in the fourth photo) indicates disappointment for not having done what one wanted or intended to do
We used 3M's Ultra Strong Double-Sided Tape
The rest is drilled with a 4mm Drill and the material provided.:Fixed with PlasticPin and done.
Firmly attached and will not come off.
It is hard to tell the effect when it rains hard. (You will get soaked anyway.)
After a rain or when running in mountainous areas where water is flowing, there seems to be less splashing.
Well, if the price were a little lower, I'd give it 5 stars, but I'll give it -1 star for that.
View detail
Fits: KAWASAKI H2 SX SE, KAWASAKI H2 SX, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000GX
I could put it on Beauty!
Purchased to prevent Wound on Meter panel
Meter panel and film with water mixed with a small amount of neutral detergent.
Spray both and affix.
Air bleed with the included Card and you are done!
I'm happy with how it looks on Beauty.
View detail
Hoping to prevent stains on the car body.
In the case of NT1100, mud splashes will contaminate the rear suspension and spring,
I resorted to this one.
I think there is a LARGE difference with and without.
P&A products seem to have good Coverability.
One of the mounting holes was slightly out of alignment.
Cracked.
There may be individual differences, but if it doesn't fit slightly when you install it, don't push too hard.
It is better to process the hole Small.
View detail
Extender Fender
The Radiator was dirty with mud and small pebbles etc. in the Radiator as OEM, but by installing this product on the FFender, the dirt was almost eliminated. I am satisfied with the installation of this product on my Rebel 1100T. View detail
SMART and well built
[How is it used?
In use in Touring
Was the one you received as per Image?
No different than the one in the picture.
Was the installation difficult?
Remove the Mirror, and remove the master Fluid on the Brake.
It is easy if you have the tools.
Do not tilt the Fluid when it is removed, and if you do, do not hold the Lever in that position.
How was your experience with it?
The design is not too large, so it does not give an "off-road" feel.
What I was looking for was a solution to the cold fingers of my hands in winter.
Insect Card in the summer.
These two points were beautifully defended.
In winter, the coldness of the fingers is reduced at once just by reducing the wind exposure.
Although bugs in the summer often hit and crush your hands when driving at high speeds,
It is hard to get dirty because it is protected by this Cover.
There is no effect on operability by attaching it.
[Included Parts:were they on?
Comes with a set of parts for installation.
[Was there anything that disappointed you?
Cheap looking; designability could be a little more elaborate.
I think it's because it has a material feel to it, maybe a Sticker or something would give it a little more atmosphere?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If it is a Material roundup, why not make it a little less expensive? Or offer painted ones, etc.
View detail
Fits: DUCATI Panigale V4, DUCATI Streetfighter V4, DUCATI Diavel V4
Seal to protect the Meter screen.
Seal to protect the Meter.
It's like putting it on your phone.
Scratch protection, more secure with it than without it.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
PanelProtection film was applied prior to delivery.
I bought a new car at Kawasaki Plaza, so I was able to put it on on the day of delivery in an environment free of Garbage and dust in the store.
Kawasaki Plaza was also pleasant enough to take the time before explaining the delivery of the car, and I was able to attach it with a sense of calm and peace of mind.
I was able to paste it well.
Since the size is a little smaller, place the film on the panel in advance and check the gap size around the film in the panel.
Image and then paste with Just fit.
Since the patterned paper is included in the product bag, it can be applied beautifully by gently pressing down on air pockets and the like.
I pasted the Super clear (transparent) one, but it looks like it is still OEM with nothing pasted on it, and I didn't realize it was attached.
It is a beautiful finish that I can't believe. I would eventually like to purchase one from the same Manufacture when the Panels are damaged.
View detail
Fits: HUSQVARNA Norden 901, KTM 125 DUKE, KTM 1290 SUPER DUKE R, KTM 1390 SUPER DUKE R, KTM 390 DUKE, KTM 790 Adventure, KTM 890 Adventure R Rally, KTM 890 Adventure R, KTM 990 DUKE, KTM SMT 890
Almost satisfied
[Color] Clear and Glare? (Matte look) Quantity:1 Set of 2pc. for now. [Color] The size is also good, but the end face is a little floated or a little air is coming in. It doesn't bother me that much, so it's OK. View detail
Extended OEM Front Fender length
Water and mud splashes are reduced and feet are less likely to get wet.
After driving on a forest road, mud was accumulating and hardening near the cooling fan. After installation, the mud splashing was reduced and the mud no longer splashed onto the cooling fan.
Double-sided Tape and Clip for mounting in quantity:It comes as a set. I drilled a hole in the Fender and installed the Clip only, without double-sided tape for easy removal.
View detail
Fits: HONDA CBR1000RR FIREBLADE
I'm satisfied
Bubbles were left on the bumps at the right end. I would have liked more clear instructions on how to work with it.
I am considering repurchasing.
View detail
Fits: KAWASAKI Ninja H2 SX, KAWASAKI ZX10R, KAWASAKI ZX-10RR
Note the placement of the double-sided tape.
Dirt comes up to the Radiator and Stem, so it is installed.
It is more troublesome than expected because it is necessary to remove the Wheel to remove the Fender.
It fits perfectly without Tape, so if Tape is applied to the sides, it will not go all the way in due to the thickness and adhesiveness of the Tape.
So, I only put it on the front part, but it can be fixed quite firmly.
However, since the motorcycle runs 300km, the included Rivet must be used and a 4mm hole must be drilled just in case.
The black color on the green-light Fender is almost conspicuous, but since it is located in the back of the house, it is hardly noticeable.
I have used it on other cars and the spray stops around the bottom of the Radiator, which makes washing the car easier.
View detail
Fits: TRIUMPH Tiger 900 GT Pro, TRIUMPH Tiger 900, TRIUMPH Tiger 900 GT, TRIUMPH Tiger 900 GT Low, TRIUMPH Tiger 850 Sport
A little more texture up would be nice.
The body is very easy to assemble and install, and although the texture of the body does not look cheap for the amount of gold, the bracket is designed to prevent gold fatigue. (？) The "Fender" is cut out of the "Fender" and the attention to detail can be seen in the cutouts. We took a lot of time and effort to tighten the screws so that the gap with the Fender on the body side is even etc. Since this is an area that constantly vibrates while driving, we recommend that you follow the instructions in the Instruction Manual and use a screw locker.
The installation extends the Fender by 25 cm, which is effective.
View detail