Reviews
Windproofing effect Extremely Large
Even OEMScreen's windproofing was generally satisfactory.
However, he purchased this product for further wind protection.
The installation was very easy. 30cm of distortion during molding was found in the vertical direction as a minus point.
The key windproofing effect is immensely Large. At high speeds it becomes (almost) windless. It may be hot in summer.
Also, the material seems to be acrylic, so I am concerned about deterioration over time.
View detail
I'm glad I bought it
The length was better than other companies' external screens because it was more windproof.
However, there is a possibility of interference depending on the installation position of the Smartphone Holder.
View detail
Parenthesis is good!
I was torn between OEMOption and ACRYPOINT.
I am glad we chose this one.
The texture is good and I think Parenthesis has improved on its own.
I'm glad I bought it
View detail
It will be more windproof, but it will be a little firmer.
For 2011 MODEL (8BK-MC51) Windshield of.
The high transparency and lack of distortion are as expected from JAPAN alone.
To install, simply remove the four screws on the side of the screen and pull it while sliding it backward.
This product comes with the Rubber Bush for installation, so there is no need to remove the Bush from the OEM, just reuse the OEM Screw to secure it. I was able to install it without feeling like it was going to crack like other Reviews and without any Gap in the Screw hole.
No problem with machining accuracy.
The OEM product is designed to be flush with the cowl, but this product is designed to be under the cowl, so there is a difference in the thickness of the cowl. It would be great if the two were flush, but since the manufacturing process is different, it would be difficult to achieve this.
The test run felt that the wind protection was quite effective.
The wind pressure against the body is considerably reduced, and before you know it, the speed has increased.
Wind noise emanating from the Screen and Cowl is not perceptible, but unfortunately I did not get the impression that the sound felt through the Helmet was any smaller. Still, I think that fatigue after a long-distance run will be lessened.
Also, the standing screen may be due to the load on the front due to wind resistance, which reduces the fluttering sensation and makes it more difficult to turn the wheel.
Originally, the front of the '23 model had a sturdier feel, but it now feels as if it is about 10% heavier.
Styling-wise, the +6cm height of this product gives a rather smoky feeling depending on the angle of view, so it would be very well put together if it were lowered by about 2cm more. However, the limit is not broken, and as you get used to seeing it, it seems to match the CowlDesign of the 23rd model, which has increased volume.
Based on the above, we can say that the satisfaction level is high from the balance of the experience effect and the change in Styling.
View detail
It looks good
The OEM Product has almost no wind protection effect, so it was tight when touring, but thanks to the 6cm higher height, the wind exposure seemed to be reduced. However, the clasp is a little too small and does not stop properly. View detail
Race ish
Purchased because OEMScreen is low.
When I used the Circuit and got down in Straight, the OEM had a poor view through the Screen, but after the replacement, it was easier to see.
Installation is relatively easy since all you have to do is remove the OEM Screen, Bolt, and Nut and install this product with a push rivet.
View detail
How nice
Windproof effect has been increased considerably.
In OEM, you can get down to your eyes full of Tanks.
Helmet dizzy from wind pressure at high speeds
I used to do this, but since I switched to this
Very stable
View detail
The Smoke Screen tightens things up a bit.
The detailing is not as good as OEM, but I am very satisfied with the Smoked color High Screen at this price.
It was easy to install, but I had a little trouble aligning the holes due to the poor manufacturing process.
Since it was fixed with Rivet, it still took about 15 minutes to replace it.
I don't know how effective it is since I haven't gone on a high speed or long touring trip yet.
But it looks tight and very good.
I could hardly feel any distortion in the view from the screen, which is also a good point.
View detail
ACRYPOINTSmoke Screen
Screen of ACRYPOINT is installed in the imitation chain of KATANA.
Parenthesis is better now.
The edge Rubber was swollen in some places and looked bad, so I would like to see it improved.
View detail
I'm not sure.
I was not sure about ZeroGRA, but I chose this one because the delivery time was 3 months.
The texture is good and I am satisfied.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
It makes you look casually COOL
It is installed in YZF-R25
i installed it on the exterior of the Saigaya for Race and was able to install it right away with no problem
The thing itself is also very good quality and strong, so it's a good replacement from OEM
View detail
z900rs transparent windshield
I think it looks better than the original one. Easy to install, however I did swap the plastic bolts that came from the package to normal bolts for a more secure install. View detail
Taka 3 cm. But 3 cm
Installation is Hexagonal Wrench one, Bolt 6 ten times to remove and replace only 10 minutes work.
The shape is comparatively close to NORMAL, especially I do not feel like changing Large, but 3Centimeter It has become longer As the wind that is indeed running is changing the flow seems to make the high speed running a little easier.
It is more smoke-sensitive than I thought, and although I see Black CROSS in the picture, visibility is not so bad.
It is not easy to see somewhat at night, but it does not mean I can not see it.
It was worth replacing it with a feeling that it looked tightened.
View detail
There is transparency and I think that thickness is also solid. After is which this transparency has?
There is transparency and I think that thickness is also solid.
After
is which this transparency has?
View detail
since a wind is equivalent to the lower part of a Helmet and it is very hard to run it even if it carries out in the inner middle whose angle adjustment is possible at the time of a highway run (it is satisfactory if an angle is formed most, but it is not
since a wind is equivalent to the lower part of a Helmet and it is very hard to run it even if it carries out in the inner middle whose angle adjustment is possible at the time of a highway run (it is satisfactory if an angle is formed most, but it is not good in fine sight), a pure Screen is pure -- the windshield effect was expected and this article that a 20-mm overall length was longer was purchased.
attachment is dramatically easy only by removing six Screws which have stopped the pure Screen and attaching this article.
Although the vehicle type which had ridden before also exchanged Screens, a hole did not suit and troubles were suffered, but this article has a hole exactly and it has attached it satisfactorily.
Although the color of the
Screen is a gray Smoke, it is well with the color of a car body, and it is pleasing.
Moreover, the Screen was effective in the Meters which were hard to see at the time of fine weather, and the another attached screen of the Navigation having hidden with the sufficient degree from direct sunlight, and having become legible by the favor which is a Gray.
Although it was the most expected windshield effect, it compared pure and was an improvement of a some grade.
Since the upper part is not drawing the curve and the Screen is not necessarily extended top 20 mm even if die length is extended 20 mm, there is no method.
Even if it carries out after [
attachment ] high speed operation, he gets the jitters under run, there is no sound, and there is no problem.
The
windshield effect is used being pleasing, although it was restrictive.
View detail