Reviews
Fits: KAWASAKI 500SS MACHIII (H1), KAWASAKI KH500
I am concerned about the Gold genus sound, but ….
It has been a month since they were installed and they are performing well.
We have made it a mixed Spec. so there is less White smoke.
I am wondering if there is a pin hole for removing oil?
If anyone knows, we would appreciate it if you could let us know.
View detail
Great value for the price
When you consider that these are mild steel and come with silencers then its hard to knock them at the price. They came well packed and arrived undamaged. I have not tested them on a bike yet, but looking at the paint i think you might want to redo that as it will probably burn off quickly and they would rust. As I said thought, there are not many aftermarket pipes you can get for this money for a YPVS. View detail
cheap
Exhaust Band rubber was replaced due to deterioration.
I was able to buy it at a reasonable price. The one that originally came with it will be the one that came with the Exhaust System.
It looks perfect with the exact same Exhaust Band.
View detail
Fits: Others
Used for FZ1FAZER
I think the overall construction is good. It is a 320 100pcs 60 Punching, I used it with Earls Gear's Titanium Kan Exhaust System, the Idling is not very stable when the inner silencer is taken out. I think it's just a matter of the setting of my car, but I think it's too much because it's a Japanese specification model. It just looks pretty good. View detail
Fits: Others
Mounted on D Tracker and NINJA2 Helmet50RR
[How is it used?
D Tracker
Running use:MOTARD (Circuit、Off-road)
Period of use:2 runs
NINJA2 Helmet50RR
Traveling:Touring, mountain passes
Period of use:About 2 months
Both are used with Baffle.
Was the one you received as per Image?
As per Image. The appearance is Material:Stainless steel, large, beautiful, and well built inner punching.
Was the installation difficult?
It was not difficult to work on both models, and there were no particular problems with the precision of the inserts.
It takes some time to adjust the position of the silencer band.
Therefore, it is necessary to work calmly and with plenty of time.
If you keep the above in mind, you will never fail.
How was your experience with it?
D Tracker
Air intake including carburetor, external air cleaner, external front pipe. (For RSV's KLX250SR) Mid pipe, external (For XR250 of FMF) When used in vehicles equipped with the exhaust and Watani Coils, the
The engine has a good release and turns smoothly up to the high RPM range.
This makes it difficult to use because of the lack of torque in the low and mid RPM range.
It looks like a large one.
When I use the Race, I'm afraid I'll be dropped for over volume at the vehicle inspection.
NINJA2 Helmet50RR
For vehicles with TSUKIGI exhaust pipe and external air cleaner
The engine has a good release and turns smoothly up to the high RPM range.
This makes it difficult to use because of the lack of torque in the low and mid RPM range.
Even with the Baffle installed, the volume is so loud that it takes a lot of care to start the engine and makes you tired when touring. Still, it is quieter than TSUKIGI's Short Silencer.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It was a good speaker, but the volume was too loud.
I would have preferred it to be a little quieter.
[ITEMS TO BUY TOGETHER
Silencer band in Φ100
Liquid Gasket (Bus Coke is also acceptable)
View detail
Exclusive for Φ89Aluminum silencer
I purchased it at the same time as K2TEC's Φ89Aluminum silencer.
It is a dedicated product, so it can be Exactly fixed to the outer circumference of the Silencer.
Since it's a Φ89, I thought a silencer band for Φ90 would work. I tried to fix it with the band for Φ90 that I had on hand, but there was a gap and it was wobbly. (Lol)
So, if you are considering purchasing K2TEC's Φ89Aluminum silencer, we recommend you to purchase this silencer band at the same time.
View detail
Universal Product is convenient.
Because the appearance was bad by the deterioration of Rubber of Exhaust Band, I replaced it. The design was the same and the price was cheap and it was the right answer to exchange. View detail
A must for Silencer fixation!
GSX1300R HAYABUSA 10 year old North American Spec.
In order to attach the Titaniumium silencer of K2TEC, use the Band of exclusive use
It can be used with no problems at all in terms of build and strength
A lot of Silencer bands have come out on Universal, but the price is not different from Large It is recommended to use the special band from the Manufacturer if you want to
There seemed to be a gap in my GSX1300R HAYABUSA when I fixed it, so I had to use it It is fixed with a few washer plates
In terms of use, the Silencer holds it firmly in place without causing any vibration
If you have a 12mm wrench and a ratchet, you can replace the Silencer in just 10 seconds Work done
As for one point of concern, in my case, the fixed position of Band is the Logo of K2TEC of Silencer It is about the letter "C" in TEC Band has come and gone, so I'm going to adjust it when I remove the Tandem Footpeg in the future I think
View detail
It's usually good
Installation was effortless and easy
However, as I thought after using it, it is made of iron and [Color] Maybe it's because of the thinness of Clear, but it produces a lot of rust
Prior to installation, you must ensure that the heat-resistant [Color] You should use Clear or something like that to prevent rust
It looks beautiful and it's a waste when it gets rusty
It feels like a good ride, but it's easy to ride
The dandruff is light, and the sound is like 2ndSports, so I like the Large change
View detail
Great value for the price,
I bought the 420x89 with 60mm baffle model. Great sound and looks for the price. Looks to be well constructed. Its on the loud side but without droning sound if you dont use baffle restrictor. I put it on 2016 ZZR1400 .Fast shipping to US. View detail
Fits: HONDA CRF250M, HONDA CRF250L
Street Image
Style is pretty good.
The sound is not too loud.
Because Heat Guard can not be attached, my son Tandem
I was worried, I did not extend it so much
I feel like I can go..
If it converts to Fender Eliminator, the waste exhaustion number
As Direct attaches to Plate,
To a slight downward trend.
View detail
Fits: KAWASAKI 400SS MACHII (S3), KAWASAKI KH400
2 Strange sound
At the time of purchasing Motorcycle, it was replaced because it was with the collective Exhaust Chamber.
It feels TorqueUP in the medium speed range and the high speed range, but it seems that the comparison finally got back to normal because the comparison is the collecting Exhaust Chamber.
However, due to the escape of Side Stand, the Left bank angle decreases and the shoes hit the Exhaust Chamber when Shift change, and it is a drawback that the heat-resistant paint of the Exhaust Chamber is peeled off.
View detail
Fits: YAMAHA RZ250R, YAMAHA RZ350R
Cost performance is good.
Installation was easy. Bracket's position and so on are bothering me for a moment.
I could wear it without being particularly suffering even by an amateur 's servant.
The sound is more quiet than I thought. I thought it might be a little more flashy sound, I think.
I feel like the Torque below is like Power, but it is not a big change so far.
I'm sorry, I do not quite understand, is this Exhaust Chamber's Spring a decoration?
It was in a state attached to the integral part from the beginning, and I think that it does not work functionally - -.
But there is not any problem in particular. The one with attached one looks good (Lol).
View detail
The pipes fit my 1973 H2 easily and the quality is very good. They clear the stock fender fine when the forks are fully compressed. Granted there are other pipes with more clearance, but that does not matter simply because they clear easily enough. The di
The pipes fit my 1973 H2 easily and the quality is very good. They clear the stock fender fine when the forks are fully compressed. Granted there are other pipes with more clearance, but that does not matter simply because they clear easily enough. The dimensions fit the aft frame attachment points exactly. K2Tec really should supply rear isolation mounts (rubber mounting) with hardware where they attach on the rear frame, some people may have difficulty making something up.(That's why I gave a 4 star rating.) Hard mounting will lead to cracked brackets eventually. The aluminum mufflers are crafted to a high standard. This system is a great buy and I'd do it again. View detail
Attached to MT-07
Because MT-07 Radiator is exposed to Aluminum
I thought that it is absolutely necessary and purchased.
Hey Radiator and Size were not good for this Core guard.
I put it in a tender and slightly bent feeling.
Well, once installed, there was no problem separately.
View detail
It looked cool but ...
Manufacturer who had many images of 2st chambers, but there are 4sts too!
Installation is simple. Remove the OEM Silencer and Heat Guard and insert the supplied Color and attach the Body. Use OEM Band as it is.
I like the appearance and the volume to suit my taste considerably.
However, there is a little exhaust leakage from the installation part of OEMExhaust System and this product. I switched the orientation of Color, but it does not change. I am using it without being anxious because it is not a ridiculous item.
I think that it is a pretty good product except for this one point.
View detail
Cospa is good!
Purchased from RZr 250 and price, appearance.
As an impression of wearing, it is obviously lighter than OEM. Moreover, I feel that elongation at high rotation has improved somewhat without losing Torque at low rotation.
From now on MJ will also be looking forward to how much it will change.
I did not expect much from the price, but I was satisfied.
View detail
Fits: Others
Almost satisfied
In the same Manufacturer, I chose the longest. The reason for choosing the longest is quiet and reason is that it is not too noisy. Naturally Baffle is used as it is removed, the impression is Punching inner diameter 50 and the total length is 620 so moderate volume (Individual differences) is. I do not like After Fire altogether. By the way Baffle is too quiet and not enough.
(The vehicle inspection is going through, is not it?) The reason why I made it to star 4 is that the Rivet division is somewhat collapsed. It will be useless, though.
View detail