Reviews
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP
exchange
With maintenance, it is exchanged to a new one for parts replacement.
It is sold as a Honda OEM Product, so I can exchange it for a new one.
View detail
Fits: HONDA NS-1, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR50
repapering
The RearCowl side display was scratched and peeling, so I purchased it to replace the upholstery.
It would be helpful to be able to buy it new from HondaOEM, but it is overpriced as a Sticker.
View detail
Fits: YAMAHA XT250, YAMAHA XT250, YAMAHA XT250, YAMAHA XT250, YAMAHA XT250, YAMAHA XT250, YAMAHA XT250, YAMAHA XT250, YAMAHA XT250, YAMAHA XT250, YAMAHA XT250, YAMAHA XT250, YAMAHA XT250, YAMAHA XT250, YAMAHA XT250, YAMAHA XT250, YAMAHA XT250, YAMAHA XT250, YAMAHA XT250, YAMAHA XT250
This is a standard OEM diverted Tune.
[How is it used?
Kawasaki D Tracker & KLX have a reservoir tank of rear brake right above the exhaust pipe, and the tank is damaged due to deterioration by heat damage. Since the phenomenon of fluid being heated remains unchanged, the parts of SEROW250 were diverted to solve the problem fundamentally.
Was the one you received as per Image?
As rumored by Net, there was no Screw thread on the bottom side of the mounting hole.
Was the installation difficult?
No modification is required. However, as shown above, there is one screw thread missing, so the Bolt & Nut must be replaced with a 1-quantity bolt and nut.:Set preparation is required. Also, it is a little troublesome to install the nut. When the ZETA frame guard is attached, it makes a lot of contact with the master cylinder, so I had to cut away the guard side.
How was your experience with it?
The Brake Fee Ring is no different, since the Master Cylinder size is 1/2 the same as the D Tracker & KLX.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None in particular, Refreshing with Compact shape.
Other items that would be helpful
Items to buy together:1Quantity of M6Bolt & Nut:Set. Nut should be Self Locking Nut, because Brake is an important security component.
View detail
Fits: YAMAHA TZ50, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ125X, YAMAHA YZ125X
It's a regular Plug.
[How is it used?
for Race
How was your experience with it?
no change from before
How did it compare to other products?
Trusted NGK
[Points to note]
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: HONDA C125, HONDA C125, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA C125, HONDA CB1100F, HONDA CB750F, HONDA CB750L, HONDA VF750, HONDA VF750, HONDA VT1100, HONDA VT1100, HONDA VT1100, HONDA VT1100, HONDA VT1100, HONDA VT1100, HONDA VT1100, HONDA VT1100
Chrome Nut Cap 10mm
About quality and texture - Excellent quality, nice chrome finish to match the retro styling of the Monkey. About the feeling of use - They look great fitted and to maintain that you will want to use a single hex socket when removing and installing them so not to damage this fastener. Products to buy together - I was not to happy with the OEM rear shocks so I paired some chrome rear shocks with stronger springs from MiniMoto, product # 7294. Difficulty of installation - Easy to install, a little thread locker and a torque wrench and you will have all 4 done in 5 minutes. Cost performance and comparison with other products - I find them expensive for just a nut and if you do need a full set you might want to look at the ones available from Kitaco, product # 520-1300920. About shipping and packaging - OEM packaging and arrived without issue. No delay on shipping and arrived on time as advertised. Any concerns, cautions, or advice when purchasing - If you are wanting some blingier ones SP Takegawa have different coloured ones available, product # 06-06-0020. View detail
Fits: HONDA C125, HONDA C125, HONDA C125, HONDA C125, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA C125, HONDA C125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125
Tap Cap O-Ring
About quality and texture - Excellent quality, tends to last a long time but eventually need changing. About the feeling of use - Fits well into the base of the tappet cover and most importantly, no oil leaks. Products to buy together - Purchased together with other O-rings and crush washers. Difficulty of installation - Easier then easy, I like to add a little engine oil to the O-ring before fitting. Cost performance and comparison with other products - This product is for a single O-ring so if you need a set order two, that being said they are reasonable priced. About shipping and packaging - Shipping cost is not cost effective when ordering single parts to Australia currently so best to create a larger order as I do. Well packaged with air pillows and bubble wrap, arrived safety and on time. Any concerns, cautions, or advice when purchasing - If unsure of the correct OEM part number for your motorcycle use Webikes OEM parts finder. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1, YAMAHA R1, YAMAHA YFZ-R1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA YZF-R6 W/ FLAMES, YAMAHA YZF-R6 W/ FLAMES, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6
Yamaha OEM Cap, Case
Case for Yamaha YZF R1. I am planning to remove the case. Put on the YEC case. The case is designed for afterburning fuel in the exhaust system. That is to say, ecology. View detail
Fits: SUZUKI GSX-R750R, SUZUKI GSX-R750, SUZUKI GSX-R1100, SUZUKI GSX-R750, SUZUKI GSX-R1100, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R1100, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R1100, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R1100, SUZUKI Bandit (GSF1200), SUZUKI Bandit (GSF1200), SUZUKI Bandit (GSF1200), SUZUKI Bandit (GSF1200), SUZUKI Bandit (GSF1200), SUZUKI Bandit (GSF1200)
WASHER
Excellent original washers for Suzuki motorcycle engines. These washers are made of metal and have a ribbed rubber coating on the top. Fits under the engine valve cover bolts. Washers are installed to seal the connection so that there is no engine oil leakage when the engine is running. Over time, the washers lose their tightness and require replacement, as in my case. The quality is excellent. Fast installation. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1, YAMAHA R1
YAMAHA OEM GASKET, CYLINDER HEAD 1
Original cylinder head gasket for YAMAHA YZF R1 RN12 05. The gasket is durable. I would like to change the cylinder head gasket for a YEC gasket, but cannot find the thin thickness. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1, YAMAHA R1, YAMAHA YFZ-R1, YAMAHA YZF-R6 W/ FLAMES, YAMAHA YZF-R6 W/ FLAMES, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6
Yamaha OEM Bleed Screw Kit
The original fitting screw for YAMAHA YZF R1 RN12 05. I bought a fitting screw for the front brake machine. Therefore, when replacing the brake fluid on the front machine, I did not unscrew the screw union. But with difficulty unscrew the screw, while tearing off all the edges. Now I do not know how I can unscrew the screw when replacing, I hope everything will be fine. View detail
Fits: YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ1, YAMAHA FZ1
YAMAHA OEM GASKET, CYLINDER
Original cylinder gasket for YAMAHA YZF R1 RN12 05. The gasket is durable, presses well. I wanted to change the cylinder gasket for a YEC, but I couldn't find the thickness you need for my bike. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1, YAMAHA R1
YAMAHA OEM PEDAL, BRAKE
Original rear brake pedal on YAMAHA YZF R1 RN12 05. Rear brake pedal material is good, lightweight, durable. I replaced my original brake pedal with a different pedal because the old one was bent when it fell. I just bent a little. But the pedal is strong. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1, YAMAHA R1
YAMAHA OEM PEDAL, BRAKE
The original rear brake foot on the YAMAHA YZF R1 RN12 05. The metal is good, strong. I changed it on my motorcycle YAMAHA R1 RN12 05 due to the fact that the brake foot bent when the previous owner fell. I replaced it, now everything is fine. I used to go on an analog, and there the metal is bad. Better to buy an original brake foot. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA FZ-1 (FZS10V), YAMAHA FZ-1 CA (FZS10VC), YAMAHA FZS1 (FZS10FCGY), YAMAHA FZS1 (FZS10FGY)
Yamaha OEM Gasket, Head Cover
I bought a gasket for the valve cover on my Yamaha YZF R1 05 motorcycle. Since my old gasket under the valve cover began to leak on the side. I decided to change, and now everything is fine. I have not considered analogs of such gaskets, the original is better. View detail