Reviews
(something) better to have
[How is it used?
Used for Fork oil change
Was the one you received as per Image?
Street Image
How was your experience with it?
Easy to use as it is a dedicated product.
The Measuring Cup sold at 100-yen stores has a wide spout that might overflow, so it would be less stressful to have a Measuring Cup.
[Points to note]
nothing special
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
It is better to have something like ForkSTAND so that you don't blunder the Oil that you have poured. Especially for those who work alone.
View detail
Well, it's Brass, so I don't blame you.
I purchased this product to remove rust from the exhaust pipes of the Exhaust System.
Compared to the cheap wooden Grip Brush sold at Home center and other places, the grip of the Gold attribute is thinner and easier to handle.
I used it on some stubborn rust, but it is a Brass Brush, so it was a little soft, and I felt that a Brush with a little more firmness would be better...but that's a matter of tool selection.
For heavy rust, I think Brush with a harder material would be better, but for light rust removal, I think it is sufficient.
View detail
Brush was quite firm.
[How is it used?
Motorcycle, I bought it to see if I could clean up the Emblem area of my car.
Was the one you received as per Image?
Brush is quite firm, although I thought it would be a little softer.
How was your experience with it?
As the name suggests, it is more of a Brush than a brush, so it takes courage to use it on painted surfaces.
I am glad I used it because it got rid of the dirt around the Emblem.
I don't know about the hairs, as I have only used them on Cowl so far, but they seemed less likely to fall out.
[Points to note]
It might scratch depending on the car body or paint color, so it might be better to try it on an inconspicuous place before using it.
I think it is for footwear and such in the first place.
You might want to write down what Brush is for or something. I was thinking of doing a tepla or something.
How did it compare to other products?
A wide variety of numbers and thicknesses are available and inexpensive.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
General Hose Band!
[How is it used?
I purchased this product as a FOR REPAIR because the Oil cooler hose band I use has rusted over time.
How was your experience with it?
The type is tightened with a slotted screwdriver, so it was difficult to apply Torque when tightening.
I think Phillips Screwdriver is easier to tighten.
How did it compare to other products?
It gives the impression of being cheap compared to other products, but since the use is for the Hose Band, there is no problem if it is considered a consumable product.
[Points to note]
Screw part is steel, so it rusts easily.
However, it is rare to find a Hose Band that is all Stainless Steel, even in other products, so this is not an option.
View detail
Easy to use
Cheap, but easy to use, and made it easy to change the Exhaust System. View detail
Optimization is also available for polishing flat Gold surfaces.
Used for maintenance of a friend's motorcycle.
The main parts used were the Brake Shoe surface of the Rear Wheel, between the RearWheel spoke, and the Clutch outer cover.
Since the brush has a certain degree of hardness, it only needs to be scrubbed with this product after applying Cleaner, and it will turn into Large Change Beauty.
This alone improves the braking performance of the Clutch Jada and Rear brake, so the Large change was a satisfactory product.
Since the brush has a certain degree of hardness, it is not reusable, so it may be better to replace it with a new one each time.
Since the price itself is not too expensive, we recommend the use of disposables from the viewpoint of maintenance effectiveness and safety improvement.
View detail
Used to install ETCAntennas.
A nearby Motorcycle supply store is using it for ETC installation.
Can be cut with office scissors. It takes a little strength.
I am concerned that the ETCAntennas may peel off easily.
View detail
cheap
Cheap.
There are other cheaper ones, but I bought this one because Nozzle's length and capacity were Exactly what I was looking for.
The cap is also screwed on, so there is no chance of accidentally slipping out and spilling.
View detail
Almost car wash sheet. recommendation for people who frequently wash their car without water.
[How is it used?
Used for waterless car washes.
After long touring or when exposed to rain, if the car is heavily soiled, it should be washed with water, but if it is not too dirty but not water repellent or dusty, it should be used.
The biggest concern for waterless car washes is scratches on the polish. I first blow off dust and sand that can be blown off with Air Duster, and then wipe off with this product. I wipe it off with this product after blowing off dust and sand that can be blown off with Air duster.
I guess it comes down to which one you don't want for yourself, since a water wash is more likely to attract rust from the salts in the tap water no matter how much you wipe it down or dry it with a water wash.
I basically wash my car with water, but I use this product to reduce the number of times I expose it to water if possible.
Especially in the summer, even when it is sunny, the mountain paths are often coated with rain, making the area around the feet very dirty.
We purchased this product with a low unit price because it is used frequently.
How was your experience with it?
I didn't feel much difference in feeling between the Car Wash sheet and the Car Wash sheet.
Motorcycle is a small body, so if it is not too dirty, it is a quantity including the undercarriage.:You can clean the whole thing with 1pc. If it's insanely dirty to begin with, it's going to get scratched up if you don't water wash it.
Seat is thin but tear-resistant, so it is easy to wipe off even the smallest of areas that Sponge cannot reach.
[Points to note]
If you wipe it off strongly, it may cause scratches, so just stroke it gently. That is enough to make it beautiful.
Items is often thought of as a shortcut for people who have a hard time washing their cars, but I think it is only suitable for people who frequently wash their cars and take care of their cars.
There are quite a lot of sheets, so if someone who doesn't use it that often buys it, I think it will dry out before it is used up.
View detail
It's cheap and easy to use. But …
Cheap and easy to use.
But to be honest, it is not essential, because it can be inserted by hand without it.
I bought it, but it became a hassle to use it, so I had to put it in by hand.
View detail
25mm
When wrapping tape around a long wiring, it can be wound faster than the commonly used 19mm. It is also easier to work with because the glue is less sticky. The disadvantage is that it is expensive. View detail
Wiring only
Compared to Vinyl Tape of the same size, the price is more than five times higher, so it is not cosmetically pleasing; still, I use it partially because it is not sticky afterwards. View detail
Surprisingly Large
Material:Aluminum brackets are used more frequently than Stainless Steel because they are lighter and do not rust.
Naturally, since it is aluminum, it should not be used on parts that are subject to force.
View detail
Various applications
It can be used for a variety of purposes.
Fixing of Speaker in Helmet, fixing of small objects around MotorcycleHandlebar, fixing of ETCBody
Fixing Offhel and Goggles Anyway, it can be anything.
View detail
Great valve for changing brake fluid
About quality and texture
Good quality valve, inside the device is a ball and a spring that presses the ball against the fitting quite strongly, preventing air from entering the system after the brake lever is released, two very soft hoses ideal for draining liquid
About the feeling of use
A very handy tool for changing the brake fluid, using it, one person can change the fluid in the brake system without any problems
Products to buy together
Completely independent tool, does not require anything additional, two clamps, two hoses and the valve itself are included
Difficulty of installation
No difficulties in use, just install from the box on the brake caliper fluid drain fitting, open the valve and start changing the fluid
Cost performance and comparison with other products
One of the cheapest and highest quality products in this category, the quality matches the price, a very simple device for good money
About shipping and packaging
Packed in a soft blister, but the product is not subject to damage from transportation, and Webike also additionally packs each product
Any concerns, cautions, or advice when purchasing
I can only advise you to buy this valve, which helps a lot in the garage to work with motorcycle maintenance -------------------------------- -------------------- About Quality and Texture The valve of good quality, inside the device is a ball and a spring that presses the ball to the fitting quite strongly, not allowing air to enter the system after releasing the brake handle, two very soft hoses that are perfect for draining liquid About the Feeling of Use A very convenient tool for replacing brake fluid, using it, one person can easily change the liquid in the brake system Products to Buy Together A fully independent tool, does not require anything additional, two clamps, two hoses and the valve itself include Difficulty of Installation No difficulties in use, just install from the box on the floodplain of the liquid from the brake caliper, open the valve and begin to replace the liquid COST Performance and Comparison with Other Products One of the cheapest and qu ality products in this category, the quality corresponds to the price, a very simple device for good money ABOUT SHIPPing and PACKAGING Packed in a soft blister, but the goods are not subject to damage from transportation, as well as Webike additionally packs each product Any Concerns, Countions, Or Advice When Purchacing You can only advise this valve for buying, which helps a lot in the garage work with motorcycle maintenance Powered by Google Translator
View detail
A size is also moderate and quite easy-to-use. The oiler was purchased with two #220, and after polishing by #220, it is finished by #400.
A size is also moderate and quite easy-to-use.
The oiler was purchased with two #220, and after polishing by #220, it is finished by #400.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA BENRY CD50, HONDA monkey, HONDA Super Cub 50, HONDA dachshund, HONDA jazz, HONDA magna fifty, HONDA Monkey BAJA, HONDA Monkey R, HONDA Monkey RT, HONDA jazz, HONDA magna fifty, HONDA Monkey BAJA, HONDA Monkey R, HONDA Monkey RT
Since it was cheap, it purchased in passing at the time of bore up. Sealing also becomes brave.
Since it was cheap, it purchased in passing at the time of bore up.
Sealing also becomes brave.
View detail
It is used for wiring at the time of grip exchange. Unite with other shoppings.
It is used for wiring at the time of grip exchange.
Unite with other shoppings.
View detail
Convenience is inconvenience!
Every time when removing and installing Caliper, maintenance was done by suspending it with Dustcloth + Vinyl bag + S-shaped Hook.
I bought it because I thought it would be nice to have it considering how often I use it.
Yes, I should have bought it earlier. I cried.
The PorchBody is thick and reliable, the String is adjustable and can be hooked on as is.
Double caliper, buy two!
This product is a must for Maintenance addicts.
View detail
Easy to use
Just a Graduated cylinder
Purchased for Fork oil weighing
The construction is adequate, so it will be used for a long time.
View detail