Reviews
Required for Side bag
Installation was fine with the bolt on. The only thing is that there was a little bit of rust floating on the weld plating, so I gave it 3 stars for quality. View detail
Satisfied?
Not installed yet.
I just looked at Parts and it was beautifully done.
View detail
Made by DAYTONA for peace of mind.
I purchased this together with the Daytona Side Back to install. It was easy to install and I don't think there is anything to worry about.
I don't know about durability such as rust, so we will have to wait and see.
View detail
One-shot mounting is easy
Easy to install the bag with just a simple screw. View detail
perfect shelf
My motorcycle is a CRF1100L Africa Twin. The original factory of this car is not equipped with a shelf. If you need to install the tail box, you need a shelf. The shelves sold on other websites are all produced by the sub-factory, which is definitely not as strong as the original factory. So I use webike I bought this original shelf, which is made of aluminum alloy and installed in the original position. The structure is stable and it is worth buying. -------------------------------------------------- -------- My motorcycle is CRF1100l Africa Twin. This car is not equipped with shelves. If you need to install the tail box, the shelves are required. I bought this original shelves, which is made of aluminum alloy of this shelf. Powered by Google Translator View detail
I was able to install it on the 2023 MODEL with no problems.
I bought it to mount a box made of Gold genus because it can be fixed securely with a 3-point fastener! 。 As mentioned in other impressions, the installation is a hassle, but it provides a sense of security.
I would still like to see the included Screws use the same size hex angles as the OEM.
View detail
Fits: YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA TMAX530, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09
Very expensive.
I bought this to install a DIY Container box on my y'sGEAR Carrier. I understand that it is expensive due to small production. I think it is unavoidable. However, I think it is reasonable to pay 500 yen.
I guess it could be that it was used outside of the dedicated product at 100 paces, but the Bracket fell out even though it was tightened with the specified Torque. We had taken other measures to secure it, so the box did not fall off. I think it is necessary to check the tightening of the bracket during breaks.
View detail
Fits: その他 , HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSICEvo, KAWASAKI VULCAN400, KAWASAKI VULCAN800, YAMAHA DRAGSTAR400
liked it
Installed immediately! It looks great and I love it. View detail
sturdy shelf
My motorcycle is a YAMAHA TMAX560. I need to add a rear trunk during the long-distance motorcycle trip. The sub-factory shelf I bought on other websites before feels not very strong. The original factory shelf purchased by WEBIKE is durable and installed in the original location. , without too much disassembly and drilling, the structure is compact and will not shake after installation, and the purchase of webike is more discounted than other places! -------------------------------------------------- -------- My motorcycle is YAMAHA TMAX560. In the long -distance motorcycle travel, I need to install the rear box. The sideline shelf I bought on another website feels not very firm. punch too much. After installation, the structure will not shake tightly. Webike purchase is larger than other places! Powered by Google Translator View detail
useful shelf
My motorcycle is YAMAHA NMAX155. The storage space of this motorcycle is relatively small, so I need to add a tail box. This GIVI Mono Lock shelf kit solves my problem, and it can be installed without changing the original tail rack. One point is fixed, the installation is very firm, and the quick-release floor is convenient for installing the GIVI's tail box. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. The storage space of this motorcycle is relatively small, so you need to install the tail box. This GIVI Mono Lock shelf kit solves my problem, and it can be installed without changing the original factory's tail frame. More The point is fixed, the installation is very firm, and the fast -moleter floor is convenient to install the GIVI tail box. Powered by Google Translator View detail
Fits: KAWASAKI W800, KAWASAKI W400, KAWASAKI W650
I like it
I waited a long time, but I like it as much as I waited. It's not a cheap product, but the side bag carrier I've been using pops out when I raise the side bag. -------------------------------------------------- ------ I've been waiting for a long time, but I like it as long as I waited. It's not cheap, but when the sideback carrier is using the side bag, the side bag pops out. Powered by Google Translator View detail
Call for SEA BASSTank Bag
It is very simple to remove the existing Bolt and install the Ring and the special Bolt on top of it. View detail
Fits: ROYAL ENFIELD Interceptor 650, ROYAL ENFIELD Continental GT650
An alternative for those who are not comfortable with OEMSaddle bagBracket
The OEMOption Side BackBracket of the Royal Enfield INT650 is silver plating, and I was concerned that it was too assertive when the bag was not attached.
However, since I do not want to wear a Bag on my upper body while driving, I was really looking for a Bracket that would not feel uncomfortable even without a Bag on.
I am very satisfied with the installation.
It is well made and has a discreet presence even without the bag attached, so it can be used as a parenthesis for a quick ride.
When installing, it is necessary to remove the screws that hold the exhaust bracket on the upper side of the Rear Shock, next to the Tandem Footpeg, and the bar to hold the Center Stand when it is erected.
The service manuals show the Torque designation for each, 18Nm on the Rear Shock, 25Nm on the Exhaust Bracket, and 25Nm on the bar that holds the Center Stand when it is set up.
We recommend tightening with a Torque wrench just to be safe.
The bar used to grip the Center Stand when it is erected is not a bar for use with the Tandem, so there should be no problem during vehicle inspections.
View detail
Honda CM300 (REBEL250) original side bag bracket
The installation of this original side bag bracket is relatively simple, and it is very firmly fixed on the car without shaking. It fits well with the original side bag, and the side bag is very easy to disassemble. Not to mention the appearance, I saw many styles of side bags in a certain treasure and thought they were ugly, so I finally chose the original one. The only disadvantage is that it is relatively heavy. If you have weight requirements, you can consider other modified brackets. If you see this, you should know how to buy overseas. Webike plus tax is almost the same as the domestic price. I personally think there is no need to toss. -------------------------------------------------- -------- The installation of this original side bag bracket is relatively simple. It is very firm in the car and it will not shake. It is very easy to remove with the original border bag. Yan value did not say that in a certain treasure, I felt ugly after watching many packets, and finally chose the original factory. The only disadvantage is that it is heavier. If you have the requirements for weight, you can consider other modified brackets. you should know how to buy a sea. Webike plus tax is almost the same as the domestic price, and I personally feel that there is no need to toss. Powered by Google Translator View detail
Can be attached at the same time as the OEM Rear Carrier and comes with a helmet holder!
I bought the OEMRear Carrier first and wanted to add the Side Back later, so I bought this product.
It was a great help because there are not many OEMRear Carriers that can be installed at the same time.
And it comes with a helmet holder, which is very convenient.
I have a 9L side bag on it and so far it seems to be durable enough.
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA Rebel1100
Speaking of Cruiser, …
I bought it because I wanted to attach a saddle bag to my Cruiser?
Two different lengths of screws were included in the package, so I think it will be easy to attach them as long as you read the instruction manual to make sure you do not make a mistake.
I don't know if the exhaust system interferes with the Saddle Bag, so I think it would be better to check if the Saddle Bag can be installed before installing the Saddle Back Support. I think it is better to check if your backpack can be attached before you start the main installation of Saddle Back Support.
Saddle bag is HenryBegins:Henry beguine
DHS-1 Saddle Bag 9L for Exhaust System Side Correspondence was installed.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB110
I'd like to wear the Bag I've always wanted to wear.
I bought this one because I have a Side bag I want to put on.
Referred by the Bag sales company.
Motorcycle is a CROSSCUB110 ja45.
I didn't think anything of the price because I don't know what the market is for Bag Support, and I don't have a Bag, so I don't know how to use it yet.
Not sure if I missed it, but Allen Wrench is required.
I borrowed it from an acquaintance and tried it. The OEMBolt is hard… If I was persistent, I was able to get it off properly without crushing the Screw Mount. The only place where I thought it might be difficult for women is here.
The dimensions were right and it healed quickly and easily.
It is still fun to put parts on a motorcycle.
View detail
I'm not happy with the accuracy
I purchased this product to distance myself from the Exhaust System.
The holes are gapped when inserting the Nut, making installation difficult.
However, it is Steel and rigid, so it is safe.
View detail
Fits: HARLEY-DAVIDSON Universal
Mounted on EVO FLSTF FATBOY
It is now very easy to attach and remove the Saddle bag.
It looks comfortable and I am satisfied with the Large change.
I should have put it on sooner.
View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
Quantity:Pair (for Left and Right) Considering the Balance of
Although there is no specific use for this product, we purchased and installed it for Left Side Support and Bag Balance.
Bag is not attached, but it looks good with a somewhat retro image.
View detail