Reviews
Since the temp meter of the yoshimura was purchased, this is also purchase. Appearance ... Whether it is visible even if it is not usually [ w ] which does not look almost usually is the world where w is also self-satisfied as for this. If a b
Since the temp meter of the yoshimura was purchased, this is also purchase.
Appearance ...
Whether it is visible even if it is not usually [ w ] which does not look almost usually is the world where w is also self-satisfied as for this.
If a blanket with the sufficient back is not found, I think that it is easy and good.
It is w after it is self-satisfied well.
View detail
This time, it attached to its R1 and saw. Since he wanted to finish wiring etc. finely, it worked by removing all the circumferences of Wright. Time can be shortened, if it attaches simply, and the big connector (16P) which removed the left-hand s
This time, it attached to its R1 and saw.
Since he wanted to finish wiring etc. finely, it worked by removing all the circumferences of Wright.
Time can be shortened, if it attaches simply, and the big connector (16P) which removed the left-hand side inner cover and has required the black waterproof cover will be removed, a terminal will be taken out from the connector by the side of a sub harness (harness by the side of a headlight) and it will attach with solder. However,
If it draws out by force since there is a lock pin, it will lead to breakage of a connector.
Please work by observing well.
Well, it is satisfactory, setting out was also completed and there was no dissatisfaction in particular in particular this time.
Although it is an impression which does a run test, I think that a play grade is fully utilizable. In running a highway etc., it uses again.
(Or [ that it can use also for management of fuel consumption etc. ]) I think whether it is good for the accent of the circumference of a meter.
Probably, it will be better to become brave about preparation, since knowledge and a tool are needed to some extent.
View detail
Since sheathing had unified with plain weave carbon, by the carbon kevlar, only the meter panel thought that it would accent and purchased. Although only covered from a meter, in order for attachment to raise workability, after removing the screen, it
Since sheathing had unified with plain weave carbon, by the carbon kevlar, only the meter panel thought that it would accent and purchased.
Although only covered from a meter, in order for attachment to raise workability, after removing the screen, it attached and carried out it.
If the glove has been worn although appearance was a cinch, it cannot reset a trip meter.
It is a one-star minus.
View detail
Fits: YAMAHA TW200E, YAMAHA TW225E, YAMAHA SR500, YAMAHA SR400
A design is simple, and although a parenthesis is good, the lamp under run of daytime is hard to see. Only for the red of a high beam, it is that it can check. It can use satisfactorily at night.
A design is simple, and although a parenthesis is good, the lamp under run of daytime is hard to see.
Only for the red of a high beam, it is that it can check.
It can use satisfactorily at night.
View detail
It was worrisome from before, and although there was also a means of direct buying from overseas, it was wavering. When net wandering was carried out casually, it sold by Mr. Webike, and since the price was quite cheap from before, I purchased. Al
It was worrisome from before, and although there was also a means of direct buying from overseas, it was wavering.
When net wandering was carried out casually, it sold by Mr. Webike, and since the price was quite cheap from before, I purchased.
Although anyone could do when the mounting arrangement had some knowledge, but it was indicated to construction explanation that a wiring extraction location was not from a meter flesh side but from CPU, although it speaks about the time lag of a display of a gear position well, a meaning after ??? goods of this sort,
Since it is a region of a toy to put it bluntly, please do not expect.
As compared with a friend's thing before bought directly from overseas, the display of the crystalline liquid became markedly legible.
View detail
writing to garters Faulk -- A meter cable ... be sufficient -- ~ be -- !! -- Finishing of exchange with 15-mm long already ... it was troubled -- be (sweat) -- ? extension ?30? mm exactly -- !!. It is purchase immediately. . . . A very con
writing to garters Faulk -- A meter cable ... be sufficient -- ~ be -- !! -- Finishing of exchange with 15-mm long already ... it was troubled -- be (sweat) -- ? extension ?30? mm exactly -- !!. It is purchase immediately.
.
.
.
A very convenient goods & price is also handy, and a five stars.
View detail
wiring is too short although it is attachment -- it is . A line must be connected on the way and must be carried out. Although it is operation, the gear ratio of a Fifth-gear Sixth gear is near, and it takes time. Regrettably we cannot not muc
wiring is too short although it is attachment -- it is .
A line must be connected on the way and must be carried out.
Although it is operation, the gear ratio of a Fifth-gear Sixth gear is near, and it takes time.
Regrettably we cannot not much recommend you.
We recommend you the indicator of GIpro DS.
Since wiring is a coupler on type for a long time, it is dramatically easy.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZRX400
It purchased as an object for yoshimura DEJITEN. Although clamped for the handle, thanks to this, the meter was settled in the cowl and the circumference of a handle felt it refreshed until now. It was borrowed by carrying out and attached, althou
It purchased as an object for yoshimura DEJITEN.
Although clamped for the handle, thanks to this, the meter was settled in the cowl and the circumference of a handle felt it refreshed until now.
It was borrowed by carrying out and attached, although it was also in play [ of other Ho ], and he thought whether to carry out that it is shaky since the place on which a meter is stuck was small.
Within a cowl, since DEJITEN was in the inner part of the speed and the tachometer, there was also merit said that migration of its eyes also decreases.
View detail
it purchased to Seventh-gear prevention of the phantom -- since it only take a glances (smile), it can check and it can concentrate on operation, he is reliable in a peak and a circuit.
it purchased to Seventh-gear prevention of the phantom -- since it only take a glances (smile), it can check and it can concentrate on operation, he is reliable in a peak and a circuit. View detail
The gear position indicator attached to ZX-9R (E type) is looked for, and this product was found, and since it was cheaper than the thing of the other company, it purchased. When it would be OK since ZX-6R using the same meter harness was on the list
The gear position indicator attached to ZX-9R (E type) is looked for, and this product was found, and since it was cheaper than the thing of the other company, it purchased.
When it would be OK since ZX-6R using the same meter harness was on the list although 9R was not on the main lists, it wired like the wiring method of 6R, but a rotation pulse cannot be taken well, but it is NG.
The staring contest was carried out to the wiring diagram of 9R, and as a result of [, such as making it branch from wiring of a pickup coil etc. ] trying many things, it succeeded by taking a rotation pulse from wiring of DI which comes out of an igniter.
However, since it differs from wiring of a description, responsibility cannot be taken, even if it refers to this report and trouble occurs ...
After attachment, although it set up along with the description, in the way as a description, the color of the back light was not changed easily but the shortage of explanation was felt.
With the description, by explanation at the time of a setup, when 1 blinked, the earth was removed and it was with ..., but when the alphabet was displayed actually, unless it removed the earth, the color of the back light did not change.
The comment which run do not have time lag, either and display a gear position immediately than expected.
Moreover, although it is not how to use original, when a shift change cannot be carried out quickly, after the gear position which is different for a moment is displayed, an original position may be displayed and it may also become the practice which carries out a shift change well.
Although it is satisfactory considering a price on the whole, we recommend you to prepare the wiring diagram of an own motorcycle before work.
The touch which the cheerful friends of the italy made is agreeable.
View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z900 (KZ900)
At the time of speed & tachometer exchange, it discovers that this damper is exhausted. In the case of old vehicles, I think that most rubber parts have deteriorated. For precision instruments, a meter also has a possibility of causing failure of
At the time of speed & tachometer exchange, it discovers that this damper is exhausted.
In the case of old vehicles, I think that most rubber parts have deteriorated.
For precision instruments, a meter also has a possibility of causing failure of the meter itself, if the measure of making vibration easing is not taken.
In Z, I consider [ that the sponge of a meter bracket may also have deteriorated, and ].
Although it is also what that the it who noticed at the time of meter exchange says ... I think whether it is also good to check dampers once.
If it is not functioning, we will recommend you exchange immediately.
He is blowing the rubber protectant (Kure) for the prolongation of life of rubber parts.
View detail
what was being considerably used from ancient times broke -- it replaced (since it is flood). Since a power source is not needed, it can use also for 6v vehicle. Moreover, since it attaches and the holder [ like ] is used, it can check also during
what was being considerably used from ancient times broke -- it replaced (since it is flood).
Since a power source is not needed, it can use also for 6v vehicle.
Moreover, since it attaches and the holder [ like ] is used, it can check also during a run.
Since the thing without a back light hardly rides at night although it is ..., it has been lent out also to the carburetor setting of motorcycles other than itself. [ OK kana ? ]
it is quite convenient -- ~
View detail
Although carried out as [ adjust / although HotGrip made from a daytona (volume type) was attached / in the modulated light volume of an emon / it / there is no temperature adjustment and ], he was Tokoro who there is no setting position and was in troubl
Although carried out as [ adjust / although HotGrip made from a daytona (volume type) was attached / in the modulated light volume of an emon / it / there is no temperature adjustment and ], he was Tokoro who there is no setting position and was in trouble.
There was a thing before purchased to fixation of the digital tachometer of the already attached daytona, and since the meter was well fixed in the center of a handle, it used for fixation of a volume and SW.
It is a cinch.
View detail
Since the meter & indicator of normal was not pleasing, the simple thing was looked for. Since this is with an indicator, the foolish large indicator of normal becomes unnecessary, and the circumference of a handle is a refreshing. At 660 g, since
Since the meter & indicator of normal was not pleasing, the simple thing was looked for.
Since this is with an indicator, the foolish large indicator of normal becomes unnecessary, and the circumference of a handle is a refreshing.
At 660 g, since this meter is 260g, no less than 400 g of meter & indicators of normal become light.
Although an indicator is small LED, it is bright and visibility has no problem.
Although the oil indicator is also attached, since it cannot use, by TW, I feel that it is wasteful.
A 140-km display is the best for TW.
Lighting is beautiful and is creating a very good atmosphere compared with the insipid thing of normal.
One with regrettable one is moisture-proof & water proof.
Seemingly perfect water proof has not been performed, and since the inside of a meter will become cloudy for a while if humid, it is necessary to hang and protect a cover etc. also during storage.
View detail
It has attached to FTR223. An oil temperature sensor OK and is easy only by being attached by a drain bolt adapter for exclusive use, and twisting engine rotation around an ignition plug. In the case of FTR223, parts like the filter for stabilizin
It has attached to FTR223.
An oil temperature sensor OK and is easy only by being attached by a drain bolt adapter for exclusive use, and twisting engine rotation around an ignition plug.
In the case of FTR223, parts like the filter for stabilizing engine rotation have attached by the thing with necessity.
With the illumination of blue, good and the display of beauty and visibility are also stable, and they are recommended.
When a power source is taken out of a headlight, a hang needs uniquely serious one for returning, since it will not be settled if a connector is not arranged well very well.
View detail
It is used when arranging KSR-2 of the founder of direct cab specifications. Since it uses with a clip, adding a plug cord, I will have demounted the main part, if the way of attaching which fastens to a bar pad is adopted and setting comes out. T
It is used when arranging KSR-2 of the founder of direct cab specifications.
Since it uses with a clip, adding a plug cord, I will have demounted the main part, if the way of attaching which fastens to a bar pad is adopted and setting comes out.
That threw into the crevice between bags and were carrying around since setting was needed also at the time of long touring, but it is not bulky is 笙ェ which is a good point.
View detail
Although it is a protector of VAPOR, it is the structure which served as attachment stay. a high grade feeling is in buff credit to carry out aluminum shaving appearance. However, it may be better to use the stay of a VAPOR body ancillary, when th
Although it is a protector of VAPOR, it is the structure which served as attachment stay.
a high grade feeling is in buff credit to carry out aluminum shaving appearance.
However, it may be better to use the stay of a VAPOR body ancillary, when thinking the visibility of a meter as important, since there is no angle adjustment in stay.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZRX400
It is used for the digital multi-temp meter of a yoshimura. Since the crawler bearing area of stay and a meter was small, if the meter of a yoshimura can be taken or it moves was worried at the beginning, but it is at the run and meter operation time,
It is used for the digital multi-temp meter of a yoshimura.
Since the crawler bearing area of stay and a meter was small, if the meter of a yoshimura can be taken or it moves was worried at the beginning, but it is at the run and meter operation time, and there was no problem.
Unlike general-purpose stay, a meter is settled finely, and an angle is also PITARRI.
Exclusive stay was used and he was Satoru Taisho.
View detail
Since the normal meter of the gorilla was removed, in order to attach the general-purpose meter of hurricane, since it was cheap, it purchased. However, since a crack is attached to an aluminum handle or it has come under the oil temperature gauge for
Since the normal meter of the gorilla was removed, in order to attach the general-purpose meter of hurricane, since it was cheap, it purchased.
However, since a crack is attached to an aluminum handle or it has come under the oil temperature gauge for a while with the photograph (the bundle condition of the clamp was not found well.) which tightened too much the bolt which stops a clamp part, and kept screw OFF when letting it pass for a handle, it is hard to see, but.
The clamp which sandwiched the rubber plate can be seen.
Although the clamp for rearview mirrors was attached to right-hand side later, I consider that it was better to divert this product.
Though it was regrettable, it was considered as two stars.
View detail
Fits: YAMAHA TW200E, YAMAHA TW225E, YAMAHA SR500, YAMAHA SR400
They are a daytona and an indicator kit. If a handle is changed, it will exchange together with a meter. A handle is a schedule of the fellow who bent the handle of a single character a little.
They are a daytona and an indicator kit.
If a handle is changed, it will exchange together with a meter.
A handle is a schedule of the fellow who bent the handle of a single character a little.
View detail