Reviews
Knee grip
I didn't have a setting on my Stomp Grip, so I was looking for something else and found it cheap, so I bought it. View detail
Good
I've used the Universal one and it's universal in every one there. View detail
Unobtrusive and good.
I have it attached to a Norton type aluminum tank, and I like the fact that it is transparent and inconspicuous. View detail
Fits: HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, KAWASAKI ZRX1200, HONDA XR650L, HONDA XR250L, HONDA CB1300 SUPER FOUR, その他 , YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400
Atmosphere first, but practical.
I used it on my SR400 and it is just the right thickness.
Since the adhesive tape provided with the product is weakened by heat, it is recommended to cut a slit in the PadBody portion that touches curved surfaces with a cutter in advance.
View detail
The texture is good
The texture and feel are OEM, matching that of Cowl. The Silicon one made by another company would be a safer choice for those who drive on circuits as well. The installation was done by Red Baron, but the factory manager told me that the installation was very difficult and that I should rest for 24 hours after the installation. Overall, I give it 4 stars. View detail
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA250R, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
Looks great once installed
About quality and texture - Quality is very good. About the feeling of use - Feels good as well. Difficulty of installation - Hard to align while sticking it, somehow mine was little bit long other looks really good once everything is done. View detail
Is good
Pasted on MT-25, SeatLimit from MTMark, so I removed Seat and pasted it.
I was worried about the green color of the other site's comments, but I am satisfied that it does not look greenish.
I have stuck a Chinese one from a certain jungle, but the adhesive strength is unmatched, and with proper degreasing, so far it is firmly attached to the edges.
I didn't know where to put the small ones, so I put them on my knees.
View detail
I would love to see LongTwo
It took about 3 hours to install the Cowl, and although it was difficult to align the Bolt, it can be done if you take your time.
It is a good product that can expect more cruising range than RALLY50.
View detail
Fits: YAMAHA TZR250, YAMAHA FZS600, YAMAHA YZF1000R, YAMAHA YZF-R1, YAMAHA TZR250, YAMAHA TZR250, YAMAHA XJR400, YAMAHA XJR1200, YAMAHA TRX850, YAMAHA TZR125, YAMAHA RZ250R, YAMAHA R1-Z, YAMAHA FJ1200, YAMAHA FZR250R
To hide dirt on old Cap.
[How is it used?
I usually don't like to put anything on my tank caps, but I used it to cover up the stains on the OEM tank caps I got because I just couldn't get them off.
TZr250R (3XV) To be honest, I was fine with this brand's pad, but there didn't seem to be much other choice, so I went with this one.
Was the one you received as per Image?
Well, it can't be helped but plain weave Carbon "Wind" It is! I insist.
I thought the image of the product would be a little more subdued, but the pattern can be seen rather clearly.
Was the installation difficult?
Alignment with the cap bolt is somewhat troublesome, and no matter where it is aligned, it will be slightly off.
I think it is a good idea to put it up little by little without panicking.
How was your experience with it?
It's just a Pad, so I'm self-satisfied, but it's better than a dirty Cap.
There is no snag in opening and closing the Cap.
[Included Parts:were they on?
In addition to the Pad, the Small Clothing Cleaner is included.
[Was there anything that disappointed you?
It's a little too assertive, but well, it's a matter of taste.
【Review】
The design is quite assertive, but well, I was able to hide the dirtiness of the Cap.
If you are careful about the position of the tape, it will not get in the way when opening and closing the Cap.
It is for Tank caps for older vehicles, but I am glad it is still Lineup.
View detail
It works fine!
[How is it used?
I replaced the tank cap with a one-touch type tank cap so that I can refuel the SPIDI when refueling the NSR250etc.
Was the one you received as per Image?
Some other impressions are nowhere near as good, but the one I purchased was not bad in quality and was perfect in terms of accuracy.
Was the installation difficult?
I was able to install it with Bolt On with Bolt.
The diameter will be 115mm Tank cap.
How was your experience with it?
It is easy to attach and detach with the One-touch when refueling, but the refueling port has to be put down once, which has its advantages and disadvantages.
[Included Parts:were they on?
Packing and Material:Stainless Steel Screws are included.
[Was there anything that disappointed you?
None in particular. It seems to be a bit risky as it seems to be hit or miss.
I would like to make it common for all manufacturers. I would like to see this standardized.
View detail
Some gaps are unfortunate.
I purchased this product to protect Tank.
The product's appearance and protective performance are very good.
Installation is also easy for anyone following the Instruction Manual.
However, when I installed it, there is a slight gap between the two, and I am concerned that water may enter through the gap when washing the car or when it rains.
Other than that, I have no complaints.
View detail
Good for tank protection and long distance touring purposes!
[How is it used?
The purpose is to protect the tank when the Tank Cover is installed and to change the tank color!
Was the one you received as per Image?
The design, functionality, and even the sewing is solid and of the same high quality as the image.
Was the installation difficult?
It can be easily attached with the included Belt.
How was your experience with it?
I had used the 14LiterTank and had the impression that it was very tight in terms of size, but this size was more relaxed and lacked a little bit of Fit.
[Included Parts:were they on?
Beltc. is attached.
[Was there anything that disappointed you?
The tank shape varies depending on the model, even for the same CB1100, so the product lineup is abundant and it may be difficult to find the right size.
*Markless 14LiterTank, EX17LiterTank, EX/RS16LiterTanketc.
For this reason, if you change the Tank, you will have to purchase even the Cover.
▼When diverting another color, care should be taken not to purchase a different size Tank Cover.
View detail
I'm pretty happy with it
Installation is easy, though,
The tank cap hole is a bit large, so positioning is a bit difficult.
The texture is satisfactory.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG
Tank Cap CoverBolt
24GoldPlating is a lighter gold color than Anodized Gold.
The appearance is completely different.
View detail
Like this
Neither good nor bad
This is how it feels.
View detail
Good shape!
Masking tape was used to come to the center
Degreasing of the sticking area was also performed.
It's been two months and no peeling at all.
Texture is very good
A little expensive.
View detail
good product.
It's before riding, but the material and make are good. But the bottom brand part hole is not good. It was easy to attach and it was good to feel the resistance of the pad. View detail
Fits: HONDA CBR650R, HONDA CBR400R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB400F, HONDA CB250R, HONDA CB1300SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CRF1000F Africa Twin, HONDA VFR800X, HONDA VFR800F, HONDA CRF250 R, HONDA GROM-II
For gasoline cap protection
Purchased to protect gasoline cap and for dress-up.
The installation is completed simply by peeling it off the backing paper and sticking it on.
It will be clean and tight, and it is a good idea to put it on before hurting it.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR400, YAMAHA XJR1300, YAMAHA FZS1000 Feather, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ1 Feather, YAMAHA FZS1000 Feather, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ1 Feather
Although it will be Accent.
I bought it thinking that the gold color would look good on my dark blue motorcycle.
The quality as Screw is perfectly fine. (The price is reasonable.) I thought it would have been better if the color had been darker. I would not have noticed it if I had not been told.
View detail
You can feel the effect.
Without leather pants, my knees would slide forward even when I was gripping them, but now I can firmly grip my knees with Jeans without slipping.
The price is also relatively reasonable.
Double-sided tape can be used to attach the product quite strongly.
View detail