Reviews
Fits: YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250X
Although board thickness is thinning a little, rather than the under guard which it is standard on other vehicles and attaches to them, he feels easy. I think that a direction which has ridden on WR250R and runs the Gallait place is the elegance which
Although board thickness is thinning a little, rather than the under guard which it is standard on other vehicles and attaches to them, he feels easy.
I think that a direction which has ridden on WR250R and runs the Gallait place is the elegance which should be examined by all means since attachment is also easy.
View detail
Fits: HARLEY-DAVIDSON XLH1200, HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1200, HARLEY-DAVIDSON XLH883
Since it had ridden and got used to the sports type motorbike, what does not have what hits at all in a left knee was in the half done state, and although it was very uneasy, sense of security came out of it considerably by the knee grip bar. It is co
Since it had ridden and got used to the sports type motorbike, what does not have what hits at all in a left knee was in the half done state, and although it was very uneasy, sense of security came out of it considerably by the knee grip bar.
It is completely different by that it is although there is only an effect stabilized in a knee location rather than a knee grip, and there being nothing.
It is the kana about which it is seldom necessary to care since a step position etc. are not right-and-left objects although it has not balanced on either side unless it projects a few, which is said correctly and which will be rich.
If it pushes strength, it slightly hurts.
View detail
Fits: DUCATI SF Front, DUCATI 1098, DUCATI 848, DUCATI 1198
Since it was emergency, it purchased. Appearance is also good bad not to break down the image of a car body. It has equipped easily by itself. It is believed that suspension is protected.
Since it was emergency, it purchased.
Appearance is also good bad not to break down the image of a car body.
It has equipped easily by itself.
It is believed that suspension is protected.
View detail
Fits: KAWASAKI BALIUSI, KAWASAKI XANTHUS, KAWASAKI ZEPHYR400 χ, KAWASAKI ZXR750, KAWASAKI ZXR250, KAWASAKI ZXR400, KAWASAKI ZX-7RR, KAWASAKI ZRX400, KAWASAKI ZX-7R, KAWASAKI , KAWASAKI , KAWASAKI Zephyr χ, KAWASAKI ZRX400, KAWASAKI ZX-7R, KAWASAKI ZX-7RR, KAWASAKI ZXR250, KAWASAKI ZXR400, KAWASAKI ZXR750, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Varios I
ZRX1200 did not have a center stand, and in order to relieve cleaning of a chain, it purchased the hook bolt. Although it is parts conspicuous [ seldom ], it contributes to improvement in serviceability and finds it useful.
ZRX1200 did not have a center stand, and in order to relieve cleaning of a chain, it purchased the hook bolt.
Although it is parts conspicuous [ seldom ], it contributes to improvement in serviceability and finds it useful.
View detail
Processing to a cowl thought that it was serious, and this requested attachment by Schopp. Although the part wages started, it has attached finely!
Processing to a cowl thought that it was serious, and this requested attachment by Schopp.
Although the part wages started, it has attached finely!
View detail
It attached to VTR250. Although he thought alone whether it would be conspicuous since it is fairly long, since it was the black of a frame and the same color, it became an accent conversely. Although he does not want to be indebted as much as pos
It attached to VTR250.
Although he thought alone whether it would be conspicuous since it is fairly long, since it was the black of a frame and the same color, it became an accent conversely.
Although he does not want to be indebted as much as possible, the sense of security of the heart is 100% up.
View detail
Fits: SUZUKI DR250R, SUZUKI DJEBEL250XC, SUZUKI DJEBEL250XC
Please think that and also attachment does not go simply well since it is a product made from a united states. [ a price ] The location of a screw hole does not suit. A hole is not a true circle but an ellipse, and moreover, a cross section is sla
Please think that and also attachment does not go simply well since it is a product made from a united states. [ a price ]
The location of a screw hole does not suit.
A hole is not a true circle but an ellipse, and moreover, a cross section is slanting and is structure of a schoolchild's work level.
Therefore, inner DJEBEL250XC has not performed attachment of one-place attachment stay.
View detail
Since it was Rider short in stature, since it was a very big car body for me, GSR400 left and I attached it together supposing GOKE at the time of motorcycle purchase. First, appearance is also comfortable and completely matches the motorcycle. Si
Since it was Rider short in stature, since it was a very big car body for me, GSR400 left and I attached it together supposing GOKE at the time of motorcycle purchase.
First, appearance is also comfortable and completely matches the motorcycle.
Since I putted together with the body color, I am seldom conspicuous, either and pleased.
Since the motorcycle has been toppled about the engine performance recently, that time is reported.
When said at a word, I attached and thought the correct answer.
By the favor of this, a conspicuous big wound etc. go into neither an engine cover nor a car body, but I appreciate this product.
It is better to attach the direction which is wavering purchase, before pushing down since a wound etc. will consider being attached by them to a cover etc. if a car body is probably pushed down in the case of GSR.
I think that it is worth attaching if the amount of money can also come.
View detail
Fits: DUCATI SF Front, DUCATI 1098, DUCATI 848, DUCATI 1198
Although a shaft diameter of what was being used for 999 s which had ridden before did not suit but it decided to newly purchase, it decided by calling it a probably cheapest and reliable manufacturer. Wearing is also very easy. It can attach, if
Although a shaft diameter of what was being used for 999 s which had ridden before did not suit but it decided to newly purchase, it decided by calling it a probably cheapest and reliable manufacturer.
Wearing is also very easy.
It can attach, if five part is.
Since it has not fallen, it cannot say about an effect, but I see and think that there are not a thing of the other company then and a big difference.
View detail
The picture attached to the inazuma 400 was discovered and purchased in a net. Although it was difficulties, it was ordinarily attached to removing a bolt (a nut uses the thing attached until now). It is quite good although it is not showy like a
The picture attached to the inazuma 400 was discovered and purchased in a net.
Although it was difficulties, it was ordinarily attached to removing a bolt (a nut uses the thing attached until now).
It is quite good although it is not showy like a slash guard.
View detail
They are goods which are searching the parts of SR400 and he has bought involuntarily. A main part has texture by the product made from aluminum, and it can direct the style different from the under guard of the normal of a frame same color (black).
They are goods which are searching the parts of SR400 and he has bought involuntarily.
A main part has texture by the product made from aluminum, and it can direct the style different from the under guard of the normal of a frame same color (black).
It will be completion, if the screw (three places) of the under guard of normal is only removed and exchanged and it is also about attachment as long as 5 minutes.
Although normal may still be sufficient, in the direction that people want to use a little different normal, I think that it is recommended.
O texture is good at the good product made from point aluminum -- a joke is made nonchalantly -- attaching -- easy x -- a bad point -- expensive dirt is conspicuous although it is small (considering a place and an aluminum color, it is unavoidable) -- it is too nonchalant and I am not noticed by people? Although it is individually satisfied,
Since it was felt as somewhat expensive kana, it is this evaluation.
View detail
Although it is required goods which there may be this or may not be, if it is, they will be very convenient goods. If attachment is also easy and ? fault is somewhat expensive in about 15 minutes, is it only the failure at the time of start to cancel?
Although it is required goods which there may be this or may not be, if it is, they will be very convenient goods.
If attachment is also easy and ? fault is somewhat expensive in about 15 minutes, is it only the failure at the time of start to cancel?
I think that it does not become obstructive by a pure vehicle, either, although a long wheel base and the direction which carried out the lowdown are necessaries.
View detail
Under the pressure of necessity, it equipped at the time of this fall. It is kind in the ability of an engine cover etc. to be protected by mere parts like this. Although it will become empty without liking to be the situation where this plays an
Under the pressure of necessity, it equipped at the time of this fall.
It is kind in the ability of an engine cover etc. to be protected by mere parts like this.
Although it will become empty without liking to be the situation where this plays an active part from now on if it can do.
It is providing is preventing.
View detail
I equipped in order to hold down the damage to a car body to minimum at the time of an emergency fall. Although he thought that an engine guard was not matched by pure guard capability, since appearance felt that it was somewhat too exaggerated for th
I equipped in order to hold down the damage to a car body to minimum at the time of an emergency fall.
Although he thought that an engine guard was not matched by pure guard capability, since appearance felt that it was somewhat too exaggerated for the engine guard, he chose the skid pad of the comparatively smart impression.
Wearing was performed by itself.
If even the tool is possessed, there is no difficult thing.
It is enough if it is as long as working hours and 10 minutes.
Since the bolt which is fixing the engine merely adds a hand, you have to carry out the well of the torque management.
or which does not own the torque wrench -- the direction which the right usage does not understand is attached to the more detailed one in Schopp or a tool, and considers that it is better to ask you for vicarious execution.
although there is nothing that is a product of a major brand and it carries out and a price says as knockout price -- -- should -- -- I think that it is not high as insurance.
However, if it can do, it will be hoped turn does not come.
View detail
compared with other manufacturers' engine slider and engine guard, it is cheap, and the design of the skid pad made from this moriwaki is also simple, and is smart! reinforcement is also perfect, although it falls once and he has been indebted (standing G
compared with other manufacturers' engine slider and engine guard, it is cheap, and the design of the skid pad made from this moriwaki is also simple, and is smart! reinforcement is also perfect, although it falls once and he has been indebted (standing GOKE) -- it seems to be.
The important engine part was protected firmly and the problem did not have a crack etc.
(An intense fall is ... although it does not understand) There are neither work with picking nor worries about the trouble by which an engine part will move if it attaches one side at a time.
Although there are components a lot and attachment looked difficult, when seeing the figure of the description, it was able to do simply.
Merely In-vehicle tool It cannot attach! A 6 mm hexagon wrench and a 14-mm socket wrench are needed.
In addition, if there are a 12-mm socket and a torque wrench, it can attach.
It is cheap, and it is simple and he is smart! They are goods of a recommend.
View detail
The skid pad which is not awkward was attached by look before you leap as the pure engine guard. It is whether since it was only how to attach, and for a description to be fairly suitable, and for a picture, a photograph, or what not have it, and atta
The skid pad which is not awkward was attached by look before you leap as the pure engine guard.
It is whether since it was only how to attach, and for a description to be fairly suitable, and for a picture, a photograph, or what not have it, and attach only a character although the seen touch was not bad so so, it is tight to an entire beginner.
it -- * -- they are four reasons.
View detail
The thing when it fell was considered and purchased. if it already falls once, furthermore the tank at that time and various parts are fixed and exchanged -- KANARI -- Attach highly. -- a tear -- if it is considered, I will think whether a skid pad is
The thing when it fell was considered and purchased.
if it already falls once, furthermore the tank at that time and various parts are fixed and exchanged -- KANARI -- Attach highly. -- a tear -- if it is considered, I will think whether a skid pad is profitable! Easy, if even a tool also has attachment! Appearance is also good!!
View detail
useless, since there was no object for inazumas 1200 -- although the object for GSF was purchased by the basis, it has attached satisfactorily. Safe, if it is although it is more expensive. Certainly [ logo / of the slider side / parenthesis ].
useless, since there was no object for inazumas 1200 -- although the object for GSF was purchased by the basis, it has attached satisfactorily.
Safe, if it is although it is more expensive.
Certainly [ logo / of the slider side / parenthesis ].
View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom1000, SUZUKI V-Strom250, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSX-R125, SUZUKI GSX-R125 ABS, SUZUKI GSX-S125
The parenthesis by entering a yoshimura logo is good. The direction which what is so said by a stand or those that are not as accessories and use perfectly since it will get damaged if it kicks, and an anodized comes off immediately and it becomes dir
The parenthesis by entering a yoshimura logo is good.
The direction which what is so said by a stand or those that are not as accessories and use perfectly since it will get damaged if it kicks, and an anodized comes off immediately and it becomes dirty worries thinks that the thing of a silver anodized does not need to be conspicuous.
View detail
having in a hand first it is polite structure -- it was the impression -. And it is if it attaches and sees. An attachment hole location is also a cinch! Since it is a cap bolt of a hexagon although it attaches and a bolt [ like ] is not known wit
having in a hand first it is polite structure -- it was the impression -.
And it is if it attaches and sees. An attachment hole location is also a cinch!
Since it is a cap bolt of a hexagon although it attaches and a bolt [ like ] is not known with a photograph, either, it is the mounting arrangement which desorption does not have uneasiness, either and also considered the pure twist.
As the comment after attachment, There is little presence ...
Because a thing is good, it will desire to stand out more.
It squats down. Well Although looked, I may hope that it is slightly large.
Moreover, although not measured about a weight, it was not felt light for the thick aluminum material.
But finishing is a beautiful product.
The conversion to the aluminum material which will shine if it polishes since it is the character which rust worries is recommended!
View detail