Reviews
Will be installed in W650's OEM Caliper
My wife's W650, Front's OEM Caliper, so it's an M8, Pt 1.25 of this Air You need a breeder
The OEM Bleeder Bolt is corrosive
After removing the air, I use the Tissue as a guide to suck up the remaining Fluid in the hole It will eventually corrode
If that happens, you won't be able to pull the Air out, so replace it before that happens
View detail
To vent the air in Thermostat
When I drained the air from the OEM Thermostat, I got Rust's boiling water mixed in at first Things have come up
Something bothered me, so I took it off and the hole in the air extractor is corroded!
I dipped it in a chemical solution, cleaned it and installed it, but it will probably rust again, so it won't rust I bought this in Titanium alloy gold wood
Clutch, front master cylinder and front caliper The Bleeder Bolt has been replaced with this 64Titanium, but the Rear Only OEM Caliper's AirBleeder Bolt is still OEM, so we'll see Replacement
View detail
Fits: YAMAHA TDM900, YAMAHA XVS1300CB 2012, YAMAHA XVS1300CU, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA ZEAL, YAMAHA ZEAL, YAMAHA YZF750SP
Even if I had a Screw, I couldn't use it
I used it in a Tokico 6-pot, and since the Screw was with me, I figured I could use it! Brake fluid leaked and it was Large Please be careful There is no problem in the product
View detail
High precision
For brembo new Crab 34, NORMAL's BreederValve is head 11 mm or 7 / 16in. The size of nice Size, in addition, because it is brittle and heavy made of iron, it is lightweight about 5 Gram per piece, but I think that the real value of this item is the hardness, high rigidity due to Material, plus the processing precision , The feeling of being tightened after bleeding and the feeling of security are not compare with NORMAL's Breeder, as long as the head is 10 mm. View detail
Apply brembo
Material until Breeder this time : I did not plan to turn it into a Titanium product but another Titanium Bolt from Jita ... Nut I saw it in the eyes and hurriedly purchased
I was glad I could buy it from the conclusion
Well, thanks to this Breeder, I also exchanged the Brake line comprehensively My self satisfaction is 5 stars
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
If you know this product sooner
The shape of the tip is slightly different from OEM. I feel a sense of incompatibility when I put on Rubber cap.
Seal tape winds in the reverse direction, not in the tightening direction.
Noticing that Brake fluid seeped out of Caliper's Air breeder
Rust was amazing as I removed it. Indeed when I thought this was dangerous, I found this product
Replaced. As I wrote that the installation was to tighten Seal tape one half turn and tighten
I rolled Emon's Seal tape. It looks more modest to the ground.
If you think that you could buy safety cheaply in the long run as it will not rust.
By the way, by wrapping a Seal tape, it seems that it is possible to prevent the Brake fluid from bleeding out of the thread during the air removal work.
I wrote it as a reference, since I did not write to absolutely roll it, I thought whether it is not necessary to wind Tape.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
If you know this product sooner.
Noticing that Brake fluid seeped out of Caliper's Air breeder
Rust was amazing as I removed it. Indeed when I thought this was dangerous, I found this product
Replaced. As I wrote that the installation was to tighten Seal tape one half turn and tighten
I rolled Emon's Seal tape. It looks more modest to the ground.
If you think that you could buy safety cheaply in the long run as it will not rust.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Rusty, bye bye ♪
We exchanged from OEM Parts Number during Maintenance of Commuter Scooter.
I checked the number of Air breeder, OEM Parts Number for Nisshin caliper and purchased it.
As described in the manual, I rolled around the Seal tape for about a half turn and installed it.
Combined with Stainless Steel Pad Pin, it is quite nice condition.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
To improve Maintenance.
We will also exchange Air breeder according to Brake fluid exchange.
I confirmed ProductNo in the Parts List and confirmed its compatibility with this product and ordered it.
Roll Seal tape and install.
Maintenance will be dramatically improved with this.
View detail
Fits: その他 For import type calipers (BREMBO [Brembo] common for racing and street), その他 For import type calipers (BREMBO [Brembo] common for racing and street)
The brembo product is correct instead of this
Previously, there was no tool to match when brembo's MASTER, Caliper air bleeding tried, and there was a memory to go buy. By changing to Breeder here, it will be 10 mm Box so you can make it with the tools you generally have. Also used second etc. I think that it is good to go back to the Breeder where it seems to be destroyed.
Although it is a texture corresponding to the price, after all the fine parts of Stainless Steel are expensive.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Design is also well satisfied
I bought Yamaha OEM 's Brembo caliper at Oakushon,
I decided to introduce it because I did not want to use Bolt rusted everywhere as good as the condition.
Since it seems that Pitch is not definitely determined, such as Manufacturer OEM Product or not,
It is more safe to check the diameter before buying before purchasing.
Even without Vernier calipers Screw Mountain Quantity : 5pcs. It can be determined sufficiently if Length of minutes is 6 mm or more or 5 mm.
I also get an impression of a little value, but there is a notch and the design is stiff,
Because it is SUS, there is no anxiety to rust and it may be just right price considering riding for a long time.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
I hope it is cheaper
I purchased OEM Breeder because it is awesome with rust.
I thought that the product was Stainless Steel and that it would not need rust,
I was hesitant to purchase because the price is price.
Although I bought it this time, it seems that Size confirmation was not enough
Noticed when installing on the fact that BreederSize before and after is different.
I have decided to purchase another Size again.
I should have checked properly ....
View detail
Fits: その他 For import type calipers (BREMBO [Brembo] common for racing and street), その他 For import type calipers (BREMBO [Brembo] common for racing and street)
Rust prevention and a little Dress-up.
Since it rides on Motorcycle even in case of rain, I bought it by measures against rust.
Even though it looks like, the thing of OEM was not black with color, but it became Silver color and it was a little Dress-up.
Although I do not see any part that I can see after doing Rubber cap ...
However, since the Length under the neck is slightly shorter than that of the OEM on the image, attention is required when replacing.
Rubber cap's loss prevention Rubber when closing Bleeder Bolt (Rubber under the neck) It is better to install after closing Bleeder Bolt because it interferes with tightening.
For your information,.
- Brembo Casting caliper OEM Bleeder Bolt's neck length is about 16 mm
- The length under the head of Bained Steel's Bleeder Bolt is about 14 mm slightly (There is no 15 mm)
View detail
Fits: YAMAHA TDM900, YAMAHA XVS1300CB 2012, YAMAHA XVS1300CU, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA ZEAL, YAMAHA ZEAL, YAMAHA YZF750SP
I am satisfied..
Because it rusts as soon as iron, Material : I purchased Stainless Steel. We are solidly making details, we are satisfied with Large change. I am happy that it's a bit cheaper. View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
To counter rust!
I bought it because I wanted to replace SEM's Air breeder from OEM for Front caliper OH. It is measures against rust.
Once, I sealed it and assembled it.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Rust resistant Material : Stainless Steel
At Restore, the OEMBreeder was rusted and replaced.
OEM seems to rust soon so if it is Stainless Steel it will not rust.
The appearance is also the unique shine of Stainless Steel, the Motorcycle also looks shiny.
KATANA also wants to exchange it for kore when exchanging Brake fluid
View detail
Fits: YAMAHA TDM900, YAMAHA XVS1300CB 2012, YAMAHA XVS1300CU, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA ZEAL, YAMAHA ZEAL, YAMAHA YZF750SP
At Restore, anyway Stainless Steel
【What made you decide the purchase?】
OEM's RadarBolt was rotten w
【How was it actually used?】
Cool at One point
【Mounting was difficult?】
Just replace with OEM
【Please tell me the installation point and hang】
Because it is Stainless, if you overtighten it, you will crush the Caliper thread
[Is there anything I was disappointed about?]
A bit expensive - - -
【Hope for Manufacturer - Please let me know if you have any improvement points]
Nothing in particular
【Have you compared items?】
OEM
[Others]
Nothing in particular
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Rust and keep dirty
I replaced it from OEM at Timing of Fluid replacement.
OEM that I was using for many years blew up powder and got dirt burned and it did not become beautiful even if I polished, so I refreshed it.
OEM's Rubber was just Size.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Fast deliver and good packaging. Replace those rusty and corroded original caliper bleeders. Good product to invest in
Fast deliver and good packaging. Replace those rusty and corroded original caliper bleeders. Good product to invest in View detail
Fits: その他 For import type calipers (BREMBO [Brembo] common for racing and street), その他 For import type calipers (BREMBO [Brembo] common for racing and street)
When equipping VTR1000F with a brembo Casting caliper, since it rusted immediately at any rate, it changed to the STAINLESS-STEEL Breather Bolt. Since it was too big-ticket although he wanted the product made from a Titanium in fact, the Stainless was
When equipping VTR1000F with a brembo Casting caliper, since it rusted immediately at any rate, it changed to the STAINLESS-STEEL Breather Bolt.
Since it was too big-ticket although he wanted the product made from a Titanium in fact, the Stainless was used, but I think that it is enough.although it has floated immediately even if the thing (product made of a Rubber) of brembo attachment also puts in the
Cap to the back of a Cap -- a Honda -- being pure (pure number 43353-461-771) -- the settlement became good by changing.Since rust will occur if the
STAINLESS STEEL also neglects a Maintenance, I would like to hold a beautiful state.
View detail