Reviews
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZEPHYR400X, KAWASAKI ZEPHYR1100, KAWASAKI ZZR1100C, KAWASAKI ZZR1100D, KAWASAKI ZZR400, KAWASAKI ZXR750R, KAWASAKI ZXR750, KAWASAKI ZXR750R, KAWASAKI ZXR750, KAWASAKI ZX-9R, KAWASAKI GPZ900R, KAWASAKI ZX-9R
ZZR1100 of 94 models is equipped. A Black is chosen according to the color of the Fork. Doesn't it arrange here with a Silver? structure is also very good and Sim is unnecessary -- it was . It is very satisfactory. (all Mount b
ZZR1100 of 94 models is equipped.
A Black is chosen according to the color of the
Fork.
Doesn't it arrange here with a Silver?
structure is also very good and Sim is unnecessary -- it was .
It is very satisfactory.
(all Mount bolts were changed to the product made from a Titanium)
View detail
This product is a 220-mm DISC Caliper support for sticking a Yamaha pure Brembo caliper to the Front fork of a Honda DIO. If there is this, like a photograph, Front fork :. DIO system Fork Caliper: -- Yamaha-Brembo Wheel: -- 12 in
This product is a 220-mm DISC Caliper support for sticking a Yamaha pure Brembo caliper to the Front fork of a Honda DIO.
If there is this, like a photograph,
Front fork :.
DIO system Fork
Caliper: -- Yamaha-Brembo
Wheel: -- 12 inches of SUZUKI ZZ
DISC: -- NSR50 Combination, such as
, comes made 220 mm (those with the necessity of deleting when sticking to the Wheel of a SEA BASS).
-- precautions for use -- since a point is countering 2POT, it is a Washer etc., and it is necessary to carry out Center appearance of the Yamaha Brembo Caliper, and it needs to carry out it.
View detail
Although it is used in combination with new caliper (34mm), if I apply brake strengthly even in low and medium speed, it locks easily. Since weight is light, even if it locks, it is easy to reorganize, but I think that it does not suit for running safely
Although it is used in combination with new caliper (34mm), if I apply brake strengthly even in low and medium speed, it locks easily. Since weight is light, even if it locks, it is easy to reorganize, but I think that it does not suit for running safely since it locks abruptly if I don't take care. Since it has combined with the old caliper in case of a manufacturer's catalogue, it may be better to do so. The shaving and finishing are beautiful and satisfactory, and the accuracy of the center, etc. has no problem. Although the support itself is heavier than genuine, the weight in the whole brake combined with the caliper had only several gram difference as genuine. Since it was troublesome to have changed management of a hose, I chose the up type, but since the external long swing arm was attached from the first, the genuine longer hose was used. I'm not sure if the length of a genuine hose is sufficient, when it combines with a genuine swing arm. View detail
[Webike Monitor] Unlike a free Rear caliper support, a Parenthesis is good special. The place equipped with the Torque rod is conspicuous by a solid! A Bolt is also and it is using the potato. I think that good shopping was carried out.
[Webike Monitor] Unlike a
free Rear caliper support, a Parenthesis is good special.
The place equipped with the
Torque rod is conspicuous by a solid! A Bolt is also and it is using the potato.
I think that good shopping was carried out.
View detail
Unlike a free Rear caliper support, a Parenthesis is good special. The place equipped with the Torque rod is conspicuous by a solid! A Bolt is also and it is using the potato. I think that good shopping was carried out.
Unlike a free Rear caliper support, a Parenthesis is good special.
The place equipped with the
Torque rod is conspicuous by a solid! A Bolt is also and it is using the potato.
I think that good shopping was carried out.
View detail
It purchased, when exchanging a Caliper for the product made from a brembo. -- although the direction which unites a Support of another vehicle type pure, attaches, and is carried out was seen well, since the thing with a Rotor for which pains are ta
It purchased, when exchanging a Caliper for the product made from a brembo.
-- although the direction which unites a Support of another vehicle type pure, attaches, and is carried out was seen well, since the thing with a Rotor for which pains are taken to carry out Center appearance was heard, this product that can carry out Pons attachment was chosen.
It was easy wearing in
.
Since it is the
appearance * price *, it is pleasing.
View detail
* carrying out appearance good and attaching -- an easy * price -- * -- individually good shopping * -- is OVER -- the thing ♪
* carrying out appearance good and attaching -- an easy * price -- *
-- individually good shopping * --
is OVER -- the thing ♪
View detail
When it was a bottom case of the kitaco, there was only an agras or kitaco. Since it looked cheap (it is actually cheaper than this.) and the high grade feeling had this one, that of the kitaco was carried out here. Texture.
When it was a bottom case of the kitaco, there was only an agras or kitaco.
Since it looked cheap (it is actually cheaper than this.) and the high grade feeling had this one, that of the kitaco was carried out here.
Texture.
View detail
Fits: HARLEY-DAVIDSON SPORTSTER XL883, HARLEY-DAVIDSON SPORTSTER XL1200
04 years It was used in sportster XL1200R. If attachment is those who can remove a tire, it is easy. What does not need to process accuracy quite by a thing, either was likable. However, although the object for 40 mm of brembo lefts was used,
04 years It was used in sportster XL1200R.
If attachment is those who can remove a tire, it is easy.
What does not need to process accuracy quite by a thing, either was likable.
However, although the object for 40 mm of brembo lefts was used, after buying it, he noticed that a breeder bolt turned down.
Now, exhaust air does not fall out in a nice condition.
It is necessary to remove a caliper and to perform air-bleeding.
Since it seemed that at least a misumi or this was taking out caliper support, it chose here, but it is accurate for a price and satisfactory.
View detail
Although he thought that he would carry out disk-ization, since it was a thing that it is compatible, it equipped as one step to disk-izing. It was good to attach exactly without a crevice.
Although he thought that he would carry out disk-ization, since it was a thing that it is compatible, it equipped as one step to disk-izing.
It was good to attach exactly without a crevice.
View detail
Bolt-on cannot do this product used when disk-izing our APE pure. It is necessary to prepare the same manufacturer's swing arm, etc. Since there was no gap of a hole, the crab was able to be attached satisfactorily. Since it was excellent as a
Bolt-on cannot do this product used when disk-izing our APE pure.
It is necessary to prepare the same manufacturer's swing arm, etc.
Since there was no gap of a hole, the crab was able to be attached satisfactorily.
Since it was excellent as a product, it is very much satisfied.
View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D, HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D
Very nice piece and all mounting hardware is included. Installation is very simple, and with the larger caliper the stopping power is great!
Very nice piece and all mounting hardware is included. Installation is very simple, and with the larger caliper the stopping power is great! View detail
Fits: HONDA APE 50, HONDA APE 100
It was used for rear disk-ization of an ape. It purchased by perfect appearance serious consideration. It is very pleasing.
It was used for rear disk-ization of an ape.
It purchased by perfect appearance serious consideration.
It is very pleasing.
View detail
Fits: Others for Φ30 Fork
With [ although it worried with shift up and g-craft ] no g-craft pad processing with shift up pad processing. It is decided by confirmed at support of g-craft that he will be a manufacturer. -izing was able to be carried out [ 4p brembo ] especia
With [ although it worried with shift up and g-craft ] no g-craft pad processing with shift up pad processing.
It is decided by confirmed at support of g-craft that he will be a manufacturer.
-izing was able to be carried out [ 4p brembo ] especially satisfactorily.
I think that it will be OK if Sim is prepared once.
View detail
Fits: YAMAHA TZR250, YAMAHA SRX600, YAMAHA SRX400, YAMAHA FZR250
Other vehicles are followed and it is the 2nd purchase. He admired the merit of accuracy again, without feeling the necessity for Sim for adjustment being the same as that of last time. It is a recommend in the direction which attaches greater imp
Other vehicles are followed and it is the 2nd purchase.
He admired the merit of accuracy again, without feeling the necessity for Sim for adjustment being the same as that of last time.
It is a recommend in the direction which attaches greater importance than to design texture to a function.
View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D, HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D
It was used for disk-ization of an ape. Although attached to the outer of NS-1, naturally it is bolt on! Since the color of the company's wave disk rotor was titanium, it united, and it was made titanium. A price is also a recommend at a low price
It was used for disk-ization of an ape.
Although attached to the outer of NS-1, naturally it is bolt on! Since the color of the company's wave disk rotor was titanium, it united, and it was made titanium.
A price is also a recommend at a low price.
View detail
It was used for KSR which attached the NSR wheel. As there is explanation with the support in the case where a NSR wheel is used for the stainless of G craft by description of item, when the pure stainless is being used, as it is, the location of a ca
It was used for KSR which attached the NSR wheel.
As there is explanation with the support in the case where a NSR wheel is used for the stainless of G craft by description of item, when the pure stainless is being used, as it is, the location of a caliper does not suit, and unless it sets the center of a caliper in color, it is not attached.
He put in the color of 2.5-cm thickness between the caliper and the bolt which stops support, and the center came out of it exactly.
Since it is marketed, 3 mm in color is the thinnest, but if it is 3 mm, a rotor and a pat will hit.
He made color himself.
beginning -- although he thought that he would make support, since that is right, purchase by the goods here of a form being more beautiful and sushi reinforcement having it -- I think that it cut -- aside from [ the back ] support, although the color of the axle shaft of a wheel also followed,
Since the caliper was attached with itself only by color adjustment although it thought whether a price should just become cheap at this rate since it is unnecessary for itself, it is satisfied with itself.
View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D, HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D
This component was used by disk-ization of the ape. It is the combination of the outer case of XR-M, the wheel of XR-M, and a BRAKING rotor. Naturally it is the bolt ON. There is also no deviation and it has equipped easily. Although they
This component was used by disk-ization of the ape.
It is the combination of the outer case of XR-M, the wheel of XR-M, and a BRAKING rotor.
Naturally it is the bolt ON.
There is also no deviation and it has equipped easily.
Although they have come also out of other manufacturers, the price of the same components is also comparatively cheap, it acts as an adult also of the color and they are [ the color ] pleased with Sakka's titanium.
Although there was a notation of a purport which must shave a pad, first of all, by the standby, it is unprocessed and is using it.
View detail
Fits: KAWASAKI ZZR400, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZEPHYR400X, KAWASAKI GPZ900R
Before carrying out a specification change, support of the other company was used, but as for the product made from ACTIVE, structure is solid and fitting also went to the smooth.
Before carrying out a specification change, support of the other company was used, but as for the product made from ACTIVE, structure is solid and fitting also went to the smooth. View detail
Fits: SUZUKI ADDRESS V125S, SUZUKI ADDRESS V125G, SUZUKI ADDRESS V125
When attaching the caliper of a brembo, they are certainly required components. However, the conditions that there is no change in the diameter of a rotor are attached. A color can also choose black or silver and a system is also a cinch. A re
When attaching the caliper of a brembo, they are certainly required components.
However, the conditions that there is no change in the diameter of a rotor are attached.
A color can also choose black or silver and a system is also a cinch.
A recommend is carried out.
View detail