Reviews
I can see the voltage of the Motorcycle with the Cover on from inside the house!
[How is it used?
In winter, I ride less frequently and am concerned about the condition of the battery.
My beloved Z900 is stored with the Cover on, so I can't be bothered to take the Cover off in the cold, remove the Seat, and measure the voltage with the Battery checker...it's too much trouble!
(The Z900 early MODEL does not have a voltmeter, so it is Large strange.)
That's where I found this product. This is good! I thought it was a little expensive, but I installed it. (It cost over 6,000 yen when I bought it)
Was the one you received as per Image?
The code is Quantity:2pc out Material:The plastic small box, which does not have a luxurious feel, was as expected.
Was the installation difficult?
Simply loosen the Battery terminal and insert the Crab terminal and tighten.
The degree of difficulty may vary depending on the battery mounting position, but the Z900 is extremely easy.
How was your experience with it?
While in my room on the second floor of my house, I can check the voltage and battery status of my car, which is parked in the parking lot below me with the cover hanging, using my smartphone.
This is handy!
When used while running, it displays 13-14V, indicating that the regulator is working properly and charging. When used while charging, it displays about 14V. Charging. You can rest assured that it will be displayed as
[Included Parts:were they on?
Double-sided tape for fixing the Body was included.
[Was there anything that disappointed you?
Since it uses Bluetooth, sometimes it is difficult to recognize the Device when the application is launched, but I think this is unavoidable.
Opinions and requests to Manufacturer:.
I would like to install it on my other car or CAR if it were a little cheaper, since I can manage multiple cars with the app.
View detail
precision wrench
How can I maintain my car without a precise torque wrench? The TOHNICHI torque wrench I bought on webike has a torque range of 10-50 Nm, which is enough for daily maintenance of motorcycles. TOHNICHI torque wrench is made in Japan, the precision is very standard, and the adjustment is very convenient. All in all, I am very satisfied with this shopping. -------------------------------------------------- -------- How can I maintain a car-loading car for myself? I have a precise torque wrench. I bought this Tohnichi torque wrench on Webike. The torque range is 10-50 Nm, which is enough to maintain motorcycles in daily maintenance. ToHnichi torque wrench is native to Japan, with very standard accuracy and convenient adjustment. In short, this time is very satisfied. Powered by Google Translator View detail
A good helper for locomotive maintenance
"I like to maintain my motorcycle by myself. Although many people say that ordinary tools are enough, I think I need a good torque wrench. I bought this KITACO torque wrench on webike. This torque wrench is 10-30 Nm, daily oil change and other maintenance are enough, the torque adjustment is simple, the readings are clear at a glance, and the accuracy is good. --------------------------- ------------------------------- I like to maintain motorcycles by myself. Although many people say that using ordinary tools, I think I need a good torque wrench. I bought this Kitaco torque wrench on Webike. This torque wrench is 10-30 Nm. Generally, it is enough to maintain oil such as daily oil changes. The adjustment of the torque is simple, the reading is clear at a glance, and the accuracy is good. Powered by Google Translator" View detail
KIJIMA BattCheck Bluetooth4.0Battery checker
[How is it used?
I bought it to monitor the battery because it is easy for the battery to rise in winter.
Was the one you received as per Image?
Smaller than expected, so it can be stored under the Seat.
Was the installation difficult?
Simply connect directly to + (Plus) and - (Minus) of Battery.
How was your experience with it?
It is very convenient because I can check the Battery status on my phone.
[Included Parts:were they on?
Instruction Manual
[Was there anything that disappointed you?
When I buy a new phone, I have to re-install the apps, which is unavoidable but a little troublesome.
The Wi-Fi range is about 5m, so I can't check the Battery status when I am inside the house.
View detail
Type, with its neck bent in a squishy way.
Snap and Type, which breaks the neck without a sound.
The Grip is thick and the Red colored Lock button is quite stiff.
View detail
Convenient to have
I was looking for items that can display and manage voltage in the simplest way, especially in cold weather, and I found this product. I am satisfied with the necessary and sufficient functions. View detail
Compact and highly visible!
I bought it to know if the voltage is stable at all times as I have installed Navigation on my Motorcycle …
I know it's hard to tell from the picture, but it's just so visible!
It's reasonably priced, wastes no space, and is easy to read… I can't complain about this voltmeter!
It's Recommendation!
View detail
Wow that's cool
It is quite Race ish and cool compared to DAYTONA's. View detail
DAYTONA Voltmeter
Installed on GSX-R 750 K4.
The installation itself is fairly easy.
Just connect the line to Battery and take it from another pcAttachment.
No tools are required other than to remove the Motorcycle Cowl or Seat as it comes with an Electro Tap.
I did not use Electro Tap because I did not want to use it.
I think it is waterproof, so it is durable even if it gets wet, but the silicon on the connector side is a little bit too soft.
If you are concerned about it, I recommend that you fill in the gap with a glue gun or something similar.
The one I bought is a cosmetic on top of having everything I need at least yesterday because I also have Warning yesterday.
View detail
KITACO Torque wrench up to 30Nm
I purchased this Torque wrench because it can handle up to 30Nm and can cover the part that cannot be handled by the Torque wrench I have on hand.
(The torque wrench I have on hand has a minimum torque of 28Nm, and it can handle torques of 100Nm or more, so there is no problem in applying a large torque, but it cannot handle a part managed with a torque of 28Nm or less).
I use it for Torque management around the head when replacing the piston on my ADDRESS V100 and when tightening the AXISThrough pinch bolt on my GSX-S1000.
Since the part to be tightened with low torque is often tightened with overtorque, using this torque wrench provides a sense of security that the torque can be properly managed. A socket for converting the insert is also included.
View detail
A must for Maintaining
I think it is a necessity for Maintenance.
The Torque used frequently is supported, but the ASKULNut and others require 110 Nm, so a different Torque wrench is needed.
View detail
Peace of mind with constant voltage monitoring
It is safe to monitor the voltage at all times.
I am happy to see the voltage change when the car is stopped and running.
Double-sided tape is included for mounting, but I cut and attached something like removable Magic tape.
The following is a kind of Magic tape. For your reference.
3M Scotch Surface Fastener for fixing 20mm×75mm Quantity:1 Set of 2pcs. DK-94
View detail
Sunday mechanic has an Exactly
[How is it used?
YAMAHA XJR400R (Type 07) I purchased this product because I needed to take various measurements when servicing the
I often made mistakes by doing it visually, especially the thickness of Washer and the length between Screw holes.
Was the one you received as per Image?
We chose this product because it is inexpensive and can measure up to 100mm.
It is good for universal use because it can measure outer diameter, inner diameter and depth.
How was your experience with it?
I think it is inexpensive, easy to use, and has a solid accuracy aspect.
Plastic's Caliper is also available at 100s etc., but I think SK11, which is a solid Brand, is better because of the possibility of breakage and lack of reliability.
It is also nice that it comes with a bag, so there is less risk of loss, damage, or injury.
[Points to note]
It is not a problem at the Level, but the movement is a little sluggish. It is not a problem at this level, but it is a little reluctant to move.
How did it compare to other products?
We compared it to the Digital Caliper of the same Brand and the Caliper of the Others Tool Manufacturer.
I bought it because it was relatively inexpensive and I thought that the accuracy aspect would be safe because it was a brand that I saw in Home center etc.
Also, I heard that Digital Caliper often runs out of batteries when it comes time to use it, so I thought Analog would be sufficient for Sunday mechanics.
View detail
ส่งไว สินค้าคุณภาพจากญี่ปุ่น แข็งแรงทนทาน มีคู่มือการติดตั้ง เรียบร้อย ขนาดกระทัดรัด มีไฟบอกการแจ้งเตือน แบตเตอรี่จะหมด View detail
ประแจปอนด์ คุณภาพดี แข็งแรง บอกค่าความระเอียดดี ความแม่นยำดี สินค้าส่งไว จากต่างประเทศ แพ็คสินค้าดีมาก View detail
★All you need is a peace of mind! ★All you need to know!
Real time voltage can be checked, so you can see the power generation status at a glance and have peace of mind.
There is a back light, but it's hard to see outside, so I recommend mounting it so the board is facing you!
(If it is tilted, it will instantly become invisible lol)
View detail
Good for the price
After plenty of adjusting it seems to be within tolerances. I tested it against a digital torque wrench to see how close it is. After numerous adjustments and tests it seems to be okay. My things aren't going to the moon so I. can sacrifice a little accuracy. Don't like the lock screw on the bottom though.This is exactly what I needed, I have used it several times and it has performed perfectly every time Just did a full rebuild and this was the perfect piece to have. You definitely need to make sure your bolts are to spec. View detail
Love this tool!!!
When I re-grease the linkage on the rear suspension there's one nut (connecting arm to frame nut) that I can't get a torque wrench on because there's not enough room. So I've been tightening it without the torque wrench wondering if it's too tight or not tight enough. Didn't want to spend the $ for one nut. Finally after several grease jobs and worrying about that nut I decided to buy the adaptor. The instructions were easy to follow. I was able to use the adaptor at a 90 degree angle to the torque wrench so I didn't have to recalculate the torque. The tool works awesome and I tested it to some other nuts that are accessible with the torque wrench alone. Spot on! I basically bought the tool for one nut but I'm glad I did. I am a wrench head and love to work on my bike and want it.done right. To me it's worth it for the peace of mind. Nice addition to the tool box!! View detail
Necessities
It's a necessity to check the energized side. This time, I checked the energized side to get power from Fuse. The energized side is indicated by a red Lamp. Since you can't see the electrical connection, it is useful if you have one of these. I am satisfied with its good cost performance. View detail
Compact is fine.
I bought this product because my new battery was destroyed within a month due to a regulator failure I did not notice. It is a voltmeter, so I am not looking for any particular functions, but it is simple and good. I don't ride my motorcycle every day, so I can see the battery status at a glance, which gives me peace of mind. View detail