Reviews
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FZ1FAZER, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000
Fashionable Design
The design is not just a hexagon but a spiral. The design is not only hexagonal but also spiral. View detail
Exhaust Nut, anti-dropout measures.
It will be used for the Stud bolt next to the Exhaust Gasket. 。 Apply OmegaOil's BlueGrease to the screw part for rust prevention. 。 I plan to use it with SpringWasher! 。 Tightening Torque will be half of the specified value (because of applying Grease.) 。 It's to prevent the Exhaust Nut from falling out. 。 If you've ever dropped out, how about giving it a try? View detail
Fits: HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB, HONDA glom, HONDA CUB, HONDA NSR80, HONDA NSR50, HONDA NS-1
Please use it when you change the Clutch.
I used it to replace the Clutch on my CUB.
This is used to remove the Clutch lowers from the vehicle.
You can't substitute any other tools for this job, so get them!
good point
This tool is made by KITACO, who is well versed in 4MINI, so you can use it with confidence. It's highly accurate, so it won't ruin your nut.
It can also be used for Horizontal TypeEngine, such as Grom, besides CUB.
A bad point
It is a very special tool, so it is not used very often.
It is a special tool, but if you use it and break it, it will cost you a lot of money, so please use it if you want to change the clutch by yourself.
There is no harm in having one.
View detail
Used for Engine overhaul
It is taller than OEM, but since it was 50cc, I could install it without any problem. View detail
To create a sense of unity.
Used for fixing Bolt of Silencer band
The front is Black and the back is Silver.
It is moderately good.
View detail
Fits: HONDA MONKEY, HONDA SUPER CUB 50, HONDA KITACO cylinder head compatible, HONDA APE 50, HONDA APE 100, HONDA XE series, HONDA CB Series, YAMAHA TT-R50E, YAMAHA TT-R125, KAWASAKI KSR110, KAWASAKI KLX110
Upgrade& Simplify
[How is it used?
I've been tinkering with the CUB lately and enjoying it.
If you've ever tinkered with Honda's Horizontal TypeEngine, you'll know that Tappet adjustment is a pain in the ass.
There is a TappetAdjuster sold for adjustment, but it costs about 2000 yen. If you want to pay that 2,000 yen, you'd be happier to add a little more and buy this product.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Just remove the Tappet cap and replace it with this one.
How was your experience with it?
Tappet adjustment will be super easy because you will be able to adjust with Slotted screwdriver and 8mm Wrench.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA glom, HONDA glom, HONDA ZOOMERX, HONDA ZOOMERX, HONDA CB400 F (JF52-1000001-), KAWASAKI Z125 PRO, HONDA MONKEY125, HONDA ZOOMERX, HONDA DAX125, HONDA CBR125 R, HONDA MSX125 SF, HONDA MSX125, HONDA MONKEY125, HONDA 400 X , HONDA CB400 R, HONDA CB250 F , HONDA CBR250 R, HONDA CT125, HONDA CL250
Replacement from STD
I have not installed it yet, but I don't know the wrench size because there is no size description. I have not installed it yet, but I do not know the wrench size because there is no size description. I will add it after I install it later. View detail
Fits: HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla]., HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla].
Resistant to rust
I used to use the Plating type, but it rusted and I bought this product! View detail
Use with Lever pivot
When I replaced the OEM lever pivot pin, I also replaced the nut. It is the world of self-satisfaction at all. (´p.s.)
Maybe no one will notice … but that's okay.
View detail
rust-resistant
M10 Hexagon Nut.
The Silencer fixed Bolt on my Motorcycle fell off, so I bought and used it as a replacement.
Accuracy is normal. The finish is rather beautiful, and the plating seems to be thicker than the one sold by Rose at Home center. I think it is.
If you get the pitch right, you can install it without any problems, and there's nothing to say about it.
However, it's a little expensive, so I think it's best to just buy it on the side of something.
View detail
Very high quality Aluminum Nut
This is a very high quality Aluminum Nut.
I bought it as a Nut for fixing Sprocket because it is Recoil processed.
The overall quality is good, but the price seems high.
If it was a little cheaper, I wouldn't have complained.
View detail
Yamaha Old Car OEMsize
As the title says, it is Yamaha old car OEMsize.
The OEM Product costs about 200 yen per piece, but this is a pack of 5 pieces.
It's very helpful.
The video is an introduction of my car FZr1000 3GM5.
View detail
As a countermeasure against potential differences in the genus Gold?
Material License Plate Bolt:Since I replaced it with Titanium, Nut is also Material as a measure against potential difference.:I made it to Titanium.
I'm not a science guy, so I don't know much about potential difference... .w
View detail
It's a great deal.
I bought it because it was necessary to replace the screen and the upper cowl.
Almost the same shape and size as KawasakiOEM Product's well nut.:It was helpful because it is far less expensive at 1 Set of 3pcs.
The price of the OEM Upper Cowl was more painful than that (sweat).
View detail
Good color and good parenthesis.
I have used the same product on other cars and have no complaints about durability without fading.
It's a bit expensive but it looks better so I'm Large happy.
View detail
color coordination
I bought it to unify the color and material for fixing Aluminum CollarBolt.
It is light and the color is bright and beautiful, but Quantity:This price is a little high for 1 Set of 4pcs.
The color fades, the materialAluminum, so how is the strength and durability? There is, but I want you to have it to some extent.
View detail
Clearance.
Rear master between Swing Arm and Rear Sets
Yes, because Clearance is usually in contact with Nut.
I was looking for a thin Nut.
Stainless SteelMaterial with Lock nut.
It was the right material!
View detail
unification
Stainless blackBolt is used, and it is purchased to unify the material and color to match the fixed use.
It looks good, but the price, Quantity:1 Set of 2pcs. is expensive.
At least, the Quantity:I wish the price was 1 Set of 4pcs.
View detail
Good product
I used it as Nut for Exhaust Band.
Gold color is One point and I like it.
The durability is unknown as I just put it on, but the platings did not come off with the tools I used during installation.
View detail
Quantity:It was 1pc.
Quantity in images:1 Set of 2pcs.:1pc
It says one in the description, but I missed it.
I bought the Spring washer because I was concerned about the thickness of the Nut when I stacked the Spring washer on top of each other as much as I needed, so I bought it.
The experiment is underway to see if the tension from the Washer can free Mirror from bending on its own.
View detail