Reviews
Fixed
The Exhaust System fixing nut was loose, and when I noticed it was gone, I thought Flange nut would be better, so I installed it. View detail
Fits: HONDA Super Cub 70, HONDA Super Cub (HA02), HONDA Super Cub (C90 type), HONDA little cub, HONDA Super Cub 50 (C50 type), HONDA Super Cub 50 (AA01), HONDA SuperCUB110pro [SuperCUB110Pro]., HONDA SuperCUB110 [SuperCUB110]., HONDA CUB [Cub]., HONDA little cub, HONDA Super Cub 50 (C50 type), HONDA Super Cub 50 (AA01), HONDA SuperCUB110pro [SuperCUB110Pro]., HONDA SuperCUB110 [SuperCUB110]., HONDA CUB [Cub].
Set of stainless steel bolts and washers
"Purchased for HONDA SUPER CUB 50 CUSTOM.
Part number: W-1741-057.
I bought a set of stainless steel bolts and washers to update the old ones, which are no longer so beautiful. Everything came up normally. This is the largest set of 12 parts and the lowest price. I recommend to everyone - it's cheap to update the look. -------------------------------------------------- -------- Acquired for Honda Super Cub 50 Custom. Article of the details: W-1741-057. I acquired a set of bolts and puck of stainless steel to update the old ones no longer so beautiful. Everything came up regularly. This is the largest set of 12 details and the lowest price. I recommend everyone - cheaply update the appearance. Powered by Google Translator"
View detail
I wanted to make it Black.
The OEM is the same FlangeLock type, but it was corroded, so I bought a Black Stainless Steel one.
Lock type is safe because it is a place where a lot of force is applied.
View detail
Stops firmly.
If they spread out a little, they will stop well.
It is not a place where force is applied, so be careful not to overtighten.
View detail
Convenient
I had a Base attached to use the RAM Mount, but it was in the way when I got it down in the Circuit, so I was looking for something to hide the Screw Mount after removing it and came across this.
This will not get in the way of getting down.
But it is expensive for a Nut.
View detail
Cheap and High quarity
I bought this product as a set with a bolt.
High quality. Machining and anodizing are perfect. It is used for fixing the fairing. However, the color will fade if exposed to direct sunlight. I don't think this price is too high.
The delivery to the Philippines was economy mail (18th). -------------------------------------------------- -------- I bought this product with a bolt and a set.The quality is high.Machine processing and alumite processing are perfect.It is used to fix the fairing. will fall. I don't think this price is high. Delivery to the Philippines was economy mail (18th). Powered by Google Translator
View detail
Fixed
The fixed nut of the Rear Sets was old, so it was replaced with a rust-resistant Stainless Steel one.
Quantity:1 Set of 2pcs. not that pricey, new, clean?
View detail
900SSCowl RubberNut replacement
RubberNut on Cowl and Cowl Bracket was damaged and was replaced.
I could not get it in with just my fingers, but I pushed it in with a Hexagonal Wrench and it worked.
View detail
They don't sell them around there.
Stainless Steel and Black! Cap Nut is common, but I could only find one with a Flange at Webig.
The quality is good! It's expensive because it's Stainless Steel, but that makes sense because it won't rust or fade!
View detail
NTBWell nut
Screen was replaced with a new one when Screen was replaced.
The quality is no different from OEM Product.
View detail
For weight reduction and dress-up
We also replaced the Nut while installing the DRCBolt to reduce weight and dress-up. (to prevent electrical corrosion)
I had learned my lesson by using an aluminum nut that I had purchased at a direct-shipping shopping site in a certain country, which had a blown screw thread when I tightened it.
As expected, there was nothing blurry about Mt. Screw.
I would not feel comfortable unless the product costs a little.
Due to the nature of the Gold genus, it is recommended to occasionally retighten or take measures to prevent sagging.
In my case, I apply a small amount of Screw lock agent to tighten the screws.
It was more effective than many times of increasing tightening. It does not sag at all.
Weight difference is NORMALSteel 15gx4pcs
M6x20Aluminum 5gx4pcs
1/3. Please use it to reduce weight.
View detail
Affordable Material:TitaniumFlange Lock Nut
We installed this ZETA TitaniumFlange Lock NutZT21-1061 (M6 P=1.0) on the M6 Cap Bolt that pushes the Master Cylinder.
The locking mechanism seems to have a narrower Screw Pitch at the top, which makes it impossible to tighten by hand at all.
I was worried that if it was too tight, it might damage the mountain on the Bolt side, but when I actually tightened it, it seemed to be Large sturdy without that much concern.
However, no type of lock nut can be guaranteed not to loosen, so I will be sure to check regularly to see if it has loosened.
I am very satisfied with the improved functionality and of course the quality of the look and feel of the product.
View detail
Fixed
Used for parts mounting and fixing.
Stainless steel, so it can be used without worrying too much about rust and dirt, and the price is not that expensive.
View detail
AGUSTA
I use Blue and Red differently, so that helps. View detail
AGUSTA
Match the color of Adjuster. View detail
Fits: HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB, HONDA glom, HONDA CUB, HONDA NSR80, HONDA NSR50, HONDA NS-1
It was used for clutch exchange of NSR50. If there is a special tool after all, it is as safe as something. However, a little more than 5000 yen is slightly high only with the tool of clutch exchange.
It was used for clutch exchange of NSR50.
If there is a special tool after all, it is as safe as something.
However, a little more than 5000 yen is slightly high only with the tool of clutch exchange.
View detail
βTitanium.Maziora blue
The Nut that matches the βTitaniumium bolt that I had purchased is the only one for βTitanium, so I bought it from Webig, who had it in stock and delivered it quickly.
Lock nut with O-ring, so there is no need to worry about damaging the bolt screw threads.:Lightweight due to Titanium
The price is a little high, but it is also used for Works Masscene, etc., so it is a titaniumium nut with a high degree of self-satisfaction.
View detail
Fits: SUZUKI GSX1000S KATANA (KATANA), SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX750 KATANA, SUZUKI GSX750 KATANA, SUZUKI GSX750 KATANA
Good parts.
It is a safe part to replace it as described in the product description. When replacing the bolt, it is better to leave it to PRO since it is tightened by Torque, which is a provision for replacing the bolt after loosening all Stud bolt nuts. View detail
Fits: DUCATI 1098R, DUCATI 1098, DUCATI 1098, DUCATI MONSTER 1200, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI STREETFIGHTER, DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 1299 Panigale S, DUCATI 1098S, DUCATI 1098S, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1199Panigale, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI MONSTER 1200S, DUCATI MONSTER 1200R
Repurchased.
I repurchased the Nut to replace it along with the Sprocket and Chain exchange.
Material:Since it is Aluminum, I decided to replace it because I knew it would get scratched when replacing the Sprocket. It had faded and I think it was just the right choice.
I think I will replace the Nut in the future when I replace the Sprocket, so I rate the cosmetics as low.
It would be good for a small dress-up of the footwear.
View detail
Fits: DUCATI 1098S, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1098, DUCATI 1098R, DUCATI 1098, DUCATI XDiavel, DUCATI XDiavel, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER S, DUCATI Multistrada 950, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200, DUCATI Multistrada 1200S Granturismo, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200 Enduro
A little dress-up
The rear sprocket, flange, and flange cover had been replaced with CNCRACING ones, but the flange nut was OEM, so the flange nut was replaced as well.
The work was done by a Dealer because I don't have many tools, etc.
Since it is a Flange nut, there is no need to change it unless the Flange is replaced.:Aluminum, so it should be replaced at the time of replacement.
Other products from CNCRACING with Red Anodized paint do not fade mysteriously, but this Nut has been in use for about 6 months and I think it is fading.
It is good for a little dress-up.
View detail