Reviews
Stainless black
We replaced it with Stainless Steel for rust resistance and Black for good looks.
The product is good, but the price is a little high. I would appreciate it if it were cheaper.
We would like to replace the bolt as well, but there is no size available, so only the lock nut was replaced this time.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
CUB of Overhaul, incidentally.
CUB I bought this while I was at Overhaul of The price is cheap and stylish. View detail
Easy search
It is easy to search for the parts I need. View detail
Fits: HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB, HONDA glom, HONDA CUB, HONDA NSR80, HONDA NSR50, HONDA NS-1
This tool sure makes clutch maintenance easier
About quality and texture, I can confirm that the quality is great and that the material used is tool steel that is strong with a durable coating. About the feeling of use, This center lock nut wrench sure makes clutch maintenance easier and can be used to remove the oil spinner also. Allows for disassembly without damaging the special nuts. Products to buy together, The heavy duty clutch kit from Kitaco would be ideal to also add to your cart when purchasing this tool so you can upgrade the complete clutch pack for better engagement and feel. Difficulty of installation, I can say the fitment of the center lock nut wrench for my installation was very easy due to the simple nature of it's use caused by it's compact design. Cost performance and comparison with other products, The pricing of the center lock nut wrench is great, specifically designed for the special nuts from Honda and easier then using random tools and all the other options are price similar. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HARLEY-DAVIDSON , HARLEY-DAVIDSON XL1200C SPORTSTER 1200
Preparation for Vehicle Inspection
Exhaust System will be returned to OEM when the car is inspected next February.
At that time, I purchased the Flange nut in advance to replace it.
Compared to the product photo, I think it is overpriced in a good way.
View detail
Looking for something similar but can't find it?
It is rather expensive,
Plating of iron instead of Stainless Steel
Cap Nut in Flange without Serrete
Hexagonal section is long
I have not been able to find anything at tool dealers or other places that meets the requirements of the above.
I'm sure I can get them more inexpensively, but it's already too dull to look for them.
It is just right for use on the Exhaust stud bolt of the Exhaust System, where you want to avoid troublemakers and such when removing and installing.
There are no concerns about the quality of the plating, and no particular peeling or rusting appears even after long-term use.
View detail
Size should be measured properly.
I bought the wrong Size so I haven't used it yet anyway.
Maybe one of these days there will be a need for it. Until then, it is fertilizer in the Screw box.
Rubber quality is good, so if storage is not a problem, it will be Large sturdy for a while.
View detail
Material after more than 20 years.:Rubber products usually go bad.
I had a hard time finding the name of this product, which expands and stops when the screw inside the rubber is pulled when the screw is turned.
Posh face is called Insert Rubber Nut, but it is also called Well nut.
Rubber components change over time. It's inevitable:after 20+ years, most OEM parts are obsolete. Thank goodness there are similar, identical constructions available, thanks to PartsManufacturer.
View detail
Fits: HONDA DAX [Dax]., HONDA CHALY [Shally]., HONDA DAX [Dax]., HONDA CHALY [Shally].
Fits Chaly, Dax and Monkey
Have ordered 3 of these sets now and are always a great fit and finish to any honda with the same threaded shock towers. will be ordering more in the future View detail
4mmWell nut
I bought this well nut to see if I could fix the screen using M4Screw.
Quantity:1 Set of 10pcs. is not that expensive, so it seems to be quite useful.
I would also like to find a nice fixed Bolt to match.
View detail
Black stainless
Since the bracket part is fixed in black, we purchased the Fixing Screw in black as well.
Stainless black looks nice, but the selling price is a bit high.
I wish they were cheaper or had more pieces.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB, HONDA glom, HONDA CUB, HONDA NSR80, HONDA NSR50, HONDA NS-1
Used on JC75 Grom. Probably only one turnout.
When replacing the clutch cover on the Grom, the centrifugal filter has to be removed, but without this I was reluctant to purchase it because I could not remove the nut that is deep in the clutch cover.
The Ratchet plug is 12.7mm, and the one I had was only 9mm, so I purchased a Conversion Adapter separately.
The length of this Adapter just reached the insertion hole, so we did not need to use Extension.
Once the centrifugal filter is removed, this part is no longer needed.
View detail
Replacement of aged well nut
The well nut used to hold the screen in place had deteriorated over time and had become chica-chica, so we replaced it. I am not sure if the old well nut was OEM or external, or how long it had been in use, but it seemed to have been in use for quite some time, and had hardened, leaving it in a tightened shape that made me think it might have been over-tightened.
In this case, we chose KITACO's product, which is less expensive than OEM's. The number of KITACO's product was 5 pieces, whereas we needed 6 pieces, so we used 2Quantity:I purchased a set. I think the number of units needed depends on the type of car and the location where it is used, but I don't think that 5 units are needed very often. Well, it is still cheaper than buying 6 OEM ones.
There is nothing particularly difficult about the installation, but removing the hardened old well nut was a large challenge, and we had to be careful not to damage the cowl by using radio pliers and picks. Once the old ones were removed, all that was left was to put the new well nuts through the cowl holes.
I installed it, and there is no particular problem, but in the review of other people who used this product on daeg, the size was Exactly to the Cowl depression, but on zrx1100, the diameter of the Well nut umbrella was a little small in relation to the Cowl depression.
As a matter of course, the new Well Nut will protect the Screen from vibration because the Rubber is newer and therefore more flexible.
View detail
Purchased for Bolt dropout prevention
[How is it used?
Purchased for Bolt dropout prevention
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
I'm worried if I don't see them regularly.
[Included Parts:were they on?
(after the -te form of a verb) not ..
[Was there anything that disappointed you?
I wish it was a little stiffer.
View detail
This is it for now.
Sprocket has a Motorcycle of the Showa era? The Plate is attached to the Bolt, so it can be pried with the Driver + Hammer. (M10, Pitch1.25mm, Wrench14mm)
I removed the BuRate and replaced it with this one for now. I made a mistake. I was supposed to buy the one with the loosening stop,
https://www.webike.net/sd/25645278/
I bought this one, so I bit the Nord-lock washer and voila!
At least it's cool now. (Lol)
View detail
Dirty but shining.
Material is designed to prevent rust and to reduce weight to a more comfortable level.:Replace with Titanium
The effect of lightweighting will only be apparent in a world of 0.01 seconds at CircuitLevel.
Therefore, I think it is generally considered to be a dress-up and maintenance product.
There are a number of companies on the market, but the titanium material used and the degree of looseness (individual bites during manufacturing) are not all the same.
The proven βTITANIUM was selected from an accuracy standpoint.
First of all, the appearance is really Parenthesis well, and I am personally Large satisfied because it shines even when it is dirty.
Loosening of the nut itself will occur no matter what material is used, unless it is attached with adhesive. It is not the case that the Nut loosens because it is Titanium.
I don't think it is a story.
Since we are talking about compared to other materials, I think the Level is fine as long as it is checked at the time of normal maintenance.
Incidentally, this product arrived with the O-ring from the beginning, so there was no need to purchase the O-ring with the initial Nut.
(O-rings are not reusable and need to be replaced next time)
View detail
Fits: HONDA glom, KAWASAKI Z125 PRO, HONDA MONKEY125, HONDA ZOOMERX, HONDA ZOOMERX, HONDA ZOOMERX, HONDA glom, HONDA CB400 F (JF52-1000001-), HONDA DAX125, HONDA 400 X , HONDA CB400 R, HONDA CB250 F , HONDA CBR250 R, HONDA CBR125 R, HONDA MSX125 SF, HONDA MSX125, HONDA MONKEY125, HONDA CT125, HONDA CL250
สินค้ามีหลากหลายสีสวยงาม View detail
Fits: HONDA glom, KAWASAKI Z125 PRO, HONDA MONKEY125, HONDA ZOOMERX, HONDA ZOOMERX, HONDA ZOOMERX, HONDA glom, HONDA CB400 F (JF52-1000001-), HONDA DAX125, HONDA 400 X , HONDA CB400 R, HONDA CB250 F , HONDA CBR250 R, HONDA CBR125 R, HONDA MSX125 SF, HONDA MSX125, HONDA MONKEY125, HONDA CT125, HONDA CL250
ได้รับสินค้าเรียบร้อย ติดตั้งเรียบร้อย View detail
I used it to fill in the riddle.
The Camshaft ChainHousing of the Z900RS Cylinder block has a mystery hole that is not used on this Motorcycle.
The diameter of the hole is 11mm. I have been wondering about this for a while, so I use well nuts to fill in this mysterious hole.
I hope they will continue to do so because it is a product line that raises the level of custom culture.
I used a 9.5Φ C550 with a thin neck, and since the parts are just for decoration, I used an appropriate lightweight aluminum M5 bolt and cap.
Other than the mystery hole for the cylinder block, the Center Stand mounting hole on the Left Side can also be filled with this well nut and M5 bolt since the hole diameter is 11mm.
View detail
Good to keep it from loosening
I purchased this product for Exhaust System fixed Bolt.
The lock is tight and will not loosen, so it can be used safely in any location where there is vibration.
View detail