Reviews
No damage even after many falls!
I chose it when I participated in a race on an off-road motorcycle with a number.
If the Number is bent, unreadable, or damaged, it will fail the Race inspection and will not be able to run.
Material that is sticky and bends well:I had inherited Plastic to be resistant to damage, and I was right.
In the race, the Motorcycle was sometimes thrown or tipped over violently, but thanks to this Plate, the Number was able to run without any damage at all.
Material:Since it is heavier than the Aluminum Simple one, we recommend a firm attachment to the Fender section.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Just the right Base for the Fender Eliminator
I bought this as a reinforcement for the License Plate of the Fender Eliminator. I wanted to use a slightly larger frame with a red frame, but it interferes with the tail cowl, so I decided to use this frame, which is almost the same size as the License Plate. It doesn't look any different, but it gives me a sense of security as a reinforcement. View detail
Fits: Others Universal
Note that Reflector is easily removed.
[How is it used?
I wanted to refreshing around the Rear of KDX220SR during Restore, so I set the Fender EliminatorSpec. to be used, but it was too refreshing and the Number seemed to bend easily.
Did you receive the item as per the Image?
butchered Material:It is a simple product made of aluminum with little assertiveness, yet it is a functional product that seems to work well and is exactly as shown in the Image.
Was it difficult to install?
Once the License Plate is removed from the vehicle, this product is inserted into the back of the License Plate and the work is completed.
BoltQuantity:Easy Custom that only requires 2pcs removal and installation to finish the work. (?) It is
How did you like it?
I installed it on a vehicle that vibrates a lot, but so far I haven't noticed any loose or cracked troubles.
Was "Included Parts:" attached?
Reflector type was purchased, so Reflector Plate, UrethaneTape for vibration reduction, Bolt&NutQuantity for installation.:2pcs BlackAluminumBolt colorQuantity:2pc. Set was included in the package.
Were there any disappointments?
As mentioned in the Title, the Reflector was removed from the Body during the installation process.
Looking at the Mounting Base, there were no claws for mounting and no trace of adhesive or double-sided tape, so it was a wonder it was still attached.
Probably if it had not been removed by this Timing, it would have come off during driving, so I wonder if I am lucky or not... I glued it with RubberBond for vibration resistance, and so far it has not come off.
Other items that would be helpful
Point and hang of installation
Since there is room in the large size of the hole for fixing the bolt, if you install the bolt properly, the bolt will be slanted or the bolt will be too large for the quantity of the bolt.:Pair (for Left and Right) If you are concerned about this, please check the upper and lower Quantities.:Pair (for Left and Right) Install it while watching the Balance of the
[Availability and clarity of the Instruction Manual
This easy-to-understand product also comes with an Instruction Manual, which is typical of Daytona's products in terms of ease of understanding.
[Notes]
As I mentioned above, Reflector is easy to remove. (Is it an individual difference?) I think it would be better to reattach it firmly with double-sided tape or Bondetc. to avoid a sad ending.
[ITEMS TO BUY TOGETHER
Nothing in particular, this product is all that is needed to complete the work.
However, it may be a good idea to purchase double-sided tape or bond etc. if you do not have them on hand to prevent the reflector from falling off.
[Opinions and requests to Manufacturer
Please make sure to take measures to prevent Reflector from falling off.
A few more color variations would be even better.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Good texture
Large size as the License Plate.
Guard the bend of Number casually.
If you don't look closely, you can't even tell it's on.
View detail
Tanax Moto fizz plate hook4
I purchased this product to install Side Back on my BirdCity125.
I think the quality is good and the cosmetics are good.
This is a product of Recommendation to Scooter.
View detail
It was not for 125CC!
I thought I bought it for 125CC, but the product is for Horizontal Type, so the upper Quantity on the License Plate is not available.:Pair (for Left and Right) has overflowed.
The reason is that I did not carefully check the shape of Engine Displacement Volume and License Plate.
It is a waste to replace it with another product so we use it with the overhang.
Parenthesis bad (crying)
View detail
Ideal for crime prevention.
This is no longer an exquisite product.
The combination of anti-tinkering Torx bolt and anti-loosening Nut is kind.
The design is simple and the color line nap is abundant.
View detail
It has a sense of luxury.
Installed on PCX160.
It is quite luxurious.
Reflector is also satisfactory with good design.
View detail
Low-profile License Plate Base
[How is it used?
If you have a Fender Eliminator, there is a risk that the License Plate may bend, so we purchased a base plate as reinforcement.
Was the one you received as per Image?
The quality is not bad, but since it is FRP, strength needs to be taken into account to a certain extent.
Was the installation difficult?
It is easy to fix by simply clamping it onto the License Plate.
How was your experience with it?
Quantity:Pair (for Left and Right) The reverse side is attached with Carbon Seat, and the other side is attached with Carbon Seat. [Color] Clear is blown on it so it seems to be easy to clean.
[Was there anything that disappointed you?
It is thinner than you might imagine, so it is likely to be cracked by a Damage that hits it. It is a reinforcement to prevent the License Plate from bending.
View detail
To prevent cracking of License Plate.
The claws on the underside of the plate were the deciding factor in my choice, and they hold the License Plate firmly in place. View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
For Dress-up
PREMIUM ZONE License Plate HolderQuantity:Set and
DAYTONA lightweight License Plate Holder for 126cc and above at the same time
Purchase
I am satisfied with the dress-up.
View detail
Fits: Others Universal
To prevent LicenseNumber bending
I bought this to prevent LicenseNumber bending.
As for the work, remove the LicenseNumber (10mm Nut).
Install with Holder
View detail
I am not into this License Plate.
Since it is not a flat shape but an enclosure, it may not fit slightly depending on the size of the License Plate.
We recommend that you carefully check the License PlateSize in your area and purchase the license plate.
View detail
Fits: Others Universal
For reinforcing License Plate
The license plate was installed as a reinforcement for the Fender Eliminator as per the product. View detail
Fits: Others Universal
No concerns about License Plate
I bought the Reflector to stabilize my squishy License Plate. It is easy for anyone to install. 。
To prevent the Plate and Holder from squeaking and squeaking, a rubber plate is attached between the Plate and Holder, but it is a little thick and not so good.
View detail
Fits: Others Universal
More than I expected
I kept in mind the various comments, but the actual product was of good quality and exceeded my expectations.
I purchased the License Plate in hopes of protecting it as much as possible.
View detail
For License Plate protection in off-road driving
good point
・ Corresponding to Notification No. 1266 of the Ministry of Land, Infrastructure, Transport and Tourism.
Looks pretty sturdy.
A bad point
Not much if you can justify the price.
For License Plate protection in off-road driving
Stainless bolt and aluminum spacer are included.
I was able to co-tighten with KIJIMARearReflectorFrame.
Please let me know if you use the Fender Eliminator Kit and run off-road.
View detail
Required to prevent cracking of License Plate.
The claws on the underside hold the license plate firmly in place. View detail
Protection of SR400 License Plate.
I feel that the License Plate does not shake so much when idling. Also, I feel that the License Plate Holder and the License Plate are firmly fixed. View detail
Fits: KAWASAKI ZX-10R, HONDA CB1000 SF (Big One), HONDA CBR600F, HONDA CBR600F, HONDA CBR900RRFire blade, HONDA CBR900RRFire blade, HONDA CBR954RRFire blade, HONDA X11, KAWASAKI GPz1100, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZX-6RR, SUZUKI GSX1400, Others
Casually Carbon and GOOD!
First of all, I am glad that the price is reasonable!
The reflector is made by k-factory, and the size and appearance are almost the same as the image.
Compared to other companies' carbon parts, the quality of the finished product is standard, but the delivery was on time and carefully packaged.
View detail