Reviews
It was a manufacturer who can trust it although it thought that a price was high, and since the high grade feeling was thick unlike the place checked in the shop and other plates, it purchased. Although it is thin touch only in case of the plate of a
It was a manufacturer who can trust it although it thought that a price was high, and since the high grade feeling was thick unlike the place checked in the shop and other plates, it purchased.
Although it is thin touch only in case of the plate of a fender less, I think that it is recommended since there is presence and the sag of a number plate is also lost.
View detail
It attached together with the aluminum license plate L. It became the touch firm compared with the insipid bolt from the first, and is very much satisfied. Since it was somewhat expensive, it wavered, but it attached and was a correct answer.
It attached together with the aluminum license plate L.
It became the touch firm compared with the insipid bolt from the first, and is very much satisfied.
Since it was somewhat expensive, it wavered, but it attached and was a correct answer.
View detail
I think that they are time-tested custom parts of a number bolt. ? which can also be united with a car body since there are also some colors .. 笙ｪ which is parts of a recommend although it is slightly expensive
I think that they are time-tested custom parts of a number bolt.
? which can also be united with a car body since there are also some colors ..
笙ｪ which is parts of a recommend although it is slightly expensive
View detail
It purchased at protection of a number plate and the one point of the circumference of a tail. More than it considered, it is thick, and reinforcement is also fully felt. Since the stainless bolt carried out continuous use of the thing from before
It purchased at protection of a number plate and the one point of the circumference of a tail.
More than it considered, it is thick, and reinforcement is also fully felt.
Since the stainless bolt carried out continuous use of the thing from before, it was not used, but it is pleased with the aluminum spacer of a holder and the same color.
I also regard a price and buying it rather, if it worries since it is handy as whereabouts.
View detail
It attached to SEROW 250. Since the cover was likely to split in the number plate part when applying the motorcycle cover of a half type, implications called the measure were strong. Since this holder interfered in the passive reflector of the num
It attached to SEROW 250.
Since the cover was likely to split in the number plate part when applying the motorcycle cover of a half type, implications called the measure were strong.
Since this holder interfered in the passive reflector of the number upper part in the case of the serow, the part was cut, and it was struck and processed with the hammer.
Although it is individually satisfactory, it may be better for the direction which has resistance in processing a new article to choose other goods.
View detail
It was used for 750 swords. Although there are only many plate holders among other manufacturers, the washer and bolt of an anodized are also attached, and since a price is also handy, that of DRC is a recommend. the dress-up effect up is also hig
It was used for 750 swords.
Although there are only many plate holders among other manufacturers, the washer and bolt of an anodized are also attached, and since a price is also handy, that of DRC is a recommend.
the dress-up effect up is also high -- 笙ｪ
View detail
It was not necessarily thoroughly called the dress-up purpose up, and it purchased in order to process it and to make it a blinker integral type. Since a crack of a number plate etc. may occur by large motorcycle of a shock, the reinforcement purpose
It was not necessarily thoroughly called the dress-up purpose up, and it purchased in order to process it and to make it a blinker integral type.
Since a crack of a number plate etc. may occur by large motorcycle of a shock, the reinforcement purpose of use is also convenient.
It is reasonable and color and the thing which is easy to unite with a body color mostly are the reasons of a recommend.
Unlike goods, such as anodized processing, the surface feels ZARATSUKI of paint application, but I also regard it as his being Ali individually well.
View detail
It is convenience to an easy custom-made & mischievous measure! It is simply made to a fashionable at a low price. And it is effective also with the mischief which can bend a number. However, since it overflows into the surroundings of a number, p
It is convenience to an easy custom-made & mischievous measure! It is simply made to a fashionable at a low price.
And it is effective also with the mischief which can bend a number.
However, since it overflows into the surroundings of a number, please become brave about the check of an attachment place.
Incidentally, GSR400 interfered in the reflector and was not attached.
View detail
Although fender-less-ized, since the silencer had worn to the half number, it attached for number protection. Since the flue gas of the silencer itself is uncanny, the number is somewhat black, but there is no damage to a number.
Although fender-less-ized, since the silencer had worn to the half number, it attached for number protection.
Since the flue gas of the silencer itself is uncanny, the number is somewhat black, but there is no damage to a number.
View detail
nonchalant, although it is small parts which fix a number plate -- custom -- it says -- it feels, and comes out and is pleasing. I attached silver.
nonchalant, although it is small parts which fix a number plate -- custom -- it says -- it feels, and comes out and is pleasing.
I attached silver.
View detail
The appearance of RIA can be dressed up easily. A price is also cheap and the custom parts bought for the very first are this. However, as a point to worry, saying [ that the washer (fellow with a color) of a thread part will damage a number plate
The appearance of RIA can be dressed up easily.
A price is also cheap and the custom parts bought for the very first are this.
However, as a point to worry, saying [ that the washer (fellow with a color) of a thread part will damage a number plate ] and the thing which I purchased had the narrow difference width of the lower clip, and since a number plate did not enter, it extended and equipped only with a few by the slotted screwdriver.
View detail
With the bolt of normal, although it is dull, if compared with Wright, the color of a holder will be emphasized, and I think that it becomes a good accent.
With the bolt of normal, although it is dull, if compared with Wright, the color of a holder will be emphasized, and I think that it becomes a good accent. View detail
An aluminum license plate holder. (Red) Matching with the (^O^) /fender less attached to CB1300SF is also well pleased with the aluminum spacer of a holder and the same color (--笙ｪ stainless bolt is attached, and since anodized processing is carried o
An aluminum license plate holder.
(Red) Matching with the (^O^) /fender less attached to CB1300SF is also well pleased with the aluminum spacer of a holder and the same color (--笙ｪ stainless bolt is attached, and since anodized processing is carried out, a holder).
There is also no fear of being rusted and I think that it can use for a long time.
They are items of a recommend at a dress-up group up (^-^)
View detail
Fits: その他 Vehicles under 125cc
It attached to the fender less made from A-TECH by D-tracker125. By exactly, the just fit is carried out to the width of the fender less. It seems that reinforcement was worrisome since the fender less was FRP, but it is satisfactory. When the
It attached to the fender less made from A-TECH by D-tracker125.
By exactly, the just fit is carried out to the width of the fender less.
It seems that reinforcement was worrisome since the fender less was FRP, but it is satisfactory.
When the carrier was loaded with the load, the visibility of the normal blinker was worrisome, but it is problem solving by this blinker.
Attachment was not so difficult, either and it carried out it to the extent that it worried about management of wiring.
View detail
The one cylinder heard that vibration is large and a number may crack, and purchased. Texture also holds a number firmly well. Although a bolt, a nut, and a washer also follow together, washers are a holder and the same color. And the pattern
The one cylinder heard that vibration is large and a number may crack, and purchased.
Texture also holds a number firmly well.
Although a bolt, a nut, and a washer also follow together, washers are a holder and the same color.
And the pattern is carved and touch is made very good.
Although it is good also for a vibration isolation, appearance also becomes suddenly better and is satisfactory.
View detail
Since wiring of a stop-lamp is made to interrupt below the (^O^) /attachment attached to the LED number support skywave (burgman), and it only stops it as a main part is put between the flesh side of a number plate, it is easy. Since he has attached o
Since wiring of a stop-lamp is made to interrupt below the (^O^) /attachment attached to the LED number support skywave (burgman), and it only stops it as a main part is put between the flesh side of a number plate, it is easy.
Since he has attached other LED (stop-lamp linkage).
I think that I think that it is unclear (^-^) the daytime which there is the quantity of light and it has satisfied more than [ which made the wiring interrupt ] it ~ Considered, but it is a cinch at night. -- A run is pleasure at night (they are parts recommended to the favorite dress-up groups of--笙ｪ blue fish up (^^繧?.
View detail
Attachment is an easy number frame. it became brave very well -- it is likely to make and come out and seems to be strong also to a twist. The washer of the same color by which coloring was carried out is also attached.
Attachment is an easy number frame.
it became brave very well -- it is likely to make and come out and seems to be strong also to a twist.
The washer of the same color by which coloring was carried out is also attached.
View detail
DRC:aluminum license plate holder 126cc - business -- on a number, the POSH:aluminum tooling bar for load credit is fixed. Although tone is delicately different, compared with the picture of HP, it is [ that it is easy positively ] blue.
DRC:aluminum license plate holder 126cc - business -- on a number, the POSH:aluminum tooling bar for load credit is fixed.
Although tone is delicately different, compared with the picture of HP, it is [ that it is easy positively ] blue.
View detail
Fits: KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z750FX
They are very satisfying goods. Since number plate attachment stay moves forward and backward, it is liking. Slender Z1R is further a stylish!
They are very satisfying goods.
Since number plate attachment stay moves forward and backward, it is liking.
Slender Z1R is further a stylish!
View detail
Since the price was handy, it bought it. It is solid and appearance is also beautiful. The sticker was got and stuck given the opportunity of check by the dealer. It is very much good touch. Although it is seldom a conspicuous portion, I t
Since the price was handy, it bought it.
It is solid and appearance is also beautiful.
The sticker was got and stuck given the opportunity of check by the dealer.
It is very much good touch.
Although it is seldom a conspicuous portion, I think that you may become a little accent if it sticks.
Since the upper and lower sides can also change a location so that a sticker can be stuck, many things are stuck.
If a difficulty is said, since it is somewhat large (the portion of the appearing carbon is very well visible to the whole when a number is given), I will think kana with it being overall the place where tastes differ.
View detail