Reviews
Your neighborhood AGRAS is the best in the world.
I used it on my commuter SPECIAL Knife Dtra 125.
When I went to AGRAS in the neighborhood, the owner of the company said he would show me some of his best stuff. He put it on himself? The AGRAS Sticker I got as a souvenir is really cool. It's the best performance in the world!
View detail
It seems to be strong. It seems to protect the exhaust system even if you fall down.
To tell the truth, the exhaust systems other than Burial are not attached with the existing Bracket, but with the existing Bracket with the hole drilling process.
I haven't rolled over, so I haven't performed yet.
View detail
dress-up
The LighTech AluminumRing for LighTech Frame Slider is available in a wide range of color line naps, so you can change it up.
It's a good idea to use it for dress-up.
You may also have several of them and change them to suit your mood.
View detail
I use it for Bar End.
I changed NINJA400 to Bar handle and installed it to Bar End at that time.
I made the Mount which is suitable for the shape of the Handlebar End and the inner diameter of Pipe by myself. The attached Bolt was not used, and the long Bolt necessary for Mount was used.
I installed it in ZrX1100 of the main machine by the same method, and I have been using it for more than a year without a problem.
As for the Slider, the Bolt is too thin to be installed, so the Bolt will be bent when it receives a large impact. However, the Bolt deformation is also the result of shock absorption, and even with this Bolt, if it falls down at low speed, it will have some effect on the Large.
I hope you never get the chance to play an active role.
View detail
Fits: HONDA CRF1100L AfricaTwin Adventure Sports
Reinforcement of the Guard
I bought it to reinforce the Tank Guard I didn't want to be without it, so I installed it
By attaching the Auxiliary Bracket to the Cowl next to the Radiator, you can use the Only the Bolt side interfered with the Frame side because it was a single bolt stopper
It's solid and looks like it will be strong
View detail
Fits: BETA RR2T250, BETA RR2T300, BETA X-Trainer250, BETA X-Trainer300
It works great, but the Price...
Installation is a bit complicated, but it's safe because it comes with Manual
I think the Guard function is perfect
It's a tough choice, but it's a good choice considering the more painful expense of destroying this area
View detail
Using Universal
Originally it is RearSlider of Off car, but it is On road as Universal I use it as a front slider for my motorcycle
It is for M6Bolt so I put a collar on the Front FenderMounting Bolt Installation
Because it is resin, it can be used in other places as well
The design is good and the logo is beautiful, so it is highly fashionable
I have installed them on my NINJA and HORNET with different color heights
It is inexpensive because it is spare parts and it looks good, so it is recommended to use them for recommendation It is
View detail
Well, it's better than nothing
It's better than nothing
About the 4th Tire replacement, a hole will be made and Wound will be attached to the Rim
I'm sure I have my own skills, but I'm surprised at the wear and tear
The price is reasonable, so I'm going to REPEAT it myself
View detail
Fits: YAMAHA Universal, HONDA Universal
Circuit also protects Motorcycle
Twin link Enjoy Sports driving at Motegi,
The other day, Front tire lost Grip at 5 Corner and crashed,
SkidPad made by MORIWAKI (And TSR's Racing Footpeg) Thanks to,
Cowl, Handlebar, Brake lever, and when it falls there is always an influence Parts are nearly intact!
I thought again that it was a reliable Brand packed with know-how cultivated in Race.
View detail
There is a sense of security
There is atmosphere firmly covering Rear's Seat and the exhaust system around!
What do you say that you are going to do, but there is a sense of security!
View detail
Fixed to Frame
As a result of seeking Engine slider for the purpose of mitigating stamper gobbles and Damage to Motorcycle at the time of placing gokke, a stick in rigid Plastic was found. However, ThirdParty made it possible to find only those that use Engine Cover 's Bolt. In Slider Kit of KAWASAKIOEM, I use the hole of Frame. In the unlikely event, I think that damage can be reduced in either case. Because ThirdParty made it possible that Engine Cover itself may be damaged, I thought that Frame is more or less strong, I chose OEM's Slider Kit.
I do not want to try the effect, but I think that there was a Dress-up effect.
Is it high with Choi?
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000, KAWASAKI Z1000 (water-cooled)
It looks good
By saying OEM, Design thinks that it matches the car body.
Although I do not know the performance unless it falls down, I think that the burden on the fixed place is small because it supports the Slider in two places rather than supporting the Slider in one place when falling over.
It is Material, but depending on the storage environment because of Material like resin? It seems that whitening and scars of water remain like a pattern.
Also, Color that Offset Slider is Zinc-based Plating (Rear side) Because of rust like white rust came out.
If OEM's Slider is attached, MORIWAKIetc. You can not install a round Slider outside the company.
View detail
CBR1000RRSC57
It is for CBR 1000 RR 08 - 10, but it can also be attached to SC 57.
Even if you standing up, I firmly Guard the Seat Cowl of SC 57 which is hanging out Large.
I am removing it now..
View detail
Fits: KAWASAKI Ninja 250R, KAWASAKI Z1000 (water-cooled), KAWASAKI ZRX1200 Daeg, KAWASAKI ZZR1400 (ZX-14), KAWASAKI Ninja 250R, KAWASAKI Z1000 (water-cooled), KAWASAKI ZRX1200 Daeg, KAWASAKI ZZR1400 (ZX-14)
I became indebted.
Only DURACON is purchasing Single Item. (^^)
I did not want to be indebted, but I got hurt by standing. I'm glad I could protect the Engine. I was saved because I was able to purchase Single Item.
Regarding the installation, I use the Engine fixed part so the tightening Torque is Large. (44nm) I crushed Male Screw with this reinstallation. Hexagon Socket I caught sacrificing Bolt by Dice and I was careful.
View detail
Replace with another company's Slider
Previously I had attached another company's Slider, but installation is stopping Engine and Frame Quantity : Because I co-tighten using 2 pc Bolt with 1 pc, I thought that the neighboring Bolt was feeling 1 pc left and it was not good looking ....
This product, Quantity : Since 2pc is used together and tightened together, there is no feeling that the parts are left over.
Although it is more expensive than other companies' products, Bolt and Spacer, which are included for attachment, are also Material : Stainless Steel, there is only expensive. It is satisfying because the product precision is very high.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000, KAWASAKI Z1000 (water-cooled)
Evry good price for Japan oem Kawasaki part oem fit fast shipping and the package is pack very nice high recommend i will be back again
Evry good price for Japan oem Kawasaki part oem fit fast shipping and the package is pack very nice high recommend i will be back again View detail
Universality is GOOD!
Mounting on SUPER JOG Zr 3 YK.
I already purchased it with Webike a while ago, but since I was wearing an Exhaust Chamber then I made this Protector which is universal. It is now OEMExhaust Chamber, but thanks to its universal nature, it has been installed without discomfort.
It is regrettable that DURACON is only White... (With Black) So painted only on DURACON Black and rolled Carbon Style Film around the perimeter... I think that the appearance was very good (Sorry for lack of pictures)
I'd like Spare's DURACON, but is it only me who wonders if I can sell the black color somehow?
Anyway, since it is not just a look, it seems there is enough strength to protect the large exhaust Exam Chamber! In other Protector I think that there is no other Protector that seems to be stronger any more.
Other Chamber Protector are the ones that Bolt seems to be getting pocky when rolling.....
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000, KAWASAKI Z1000 (water-cooled)
Excellent quality you can expect from a Japanese product. Installation is easy, it's the removal of the old bolts that is the pain in the ass. After that everything just fits snap on. Shipping packaging is top notch with installation instructions in
Excellent quality you can expect from a Japanese product. Installation is easy, it's the removal of the old bolts that is the pain in the ass. After that everything just fits snap on. Shipping packaging is top notch with installation instructions in clear and easy-to-understand english. View detail
I purchased it as a spare part (^o^)
Fortunately, Body is safe without failing to fall after purchasing, and it fully fulfills its function as an amulet. (^o^)
Just to be sure, I bought Slider Cap as a spare part as I got it.
It was cheap and priced as well as handled by webike, so it was easy to obtain and saved.
It will be appreciated if you can act as amulet as it is. (^_^;)
View detail
If you make it with Tandem premise
Tandem Footpeg I understand that Slider is a detachable but I can say I can use it as a Tandem Footpeg If there is a pear.
The halfway length is too subtle.
I think that there is no problem in terms of performance.
I hope that it will not be a situation to feel real performance.
View detail