Reviews
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
[Webike Monitor] Tandems were equipped. After running a few, even if touched by the hand, it did not get hot at all. A Side bag etc. are attached satisfactorily. As products, because it is made from the Aluminum, he has a cheaper feeling.
[Webike Monitor]
Tandems were equipped.
After running a few, even if touched by the hand, it did not get hot at all.
A Side bag etc. are attached satisfactorily.
As
products, because it is made from the Aluminum, he has a cheaper feeling.
Considering the
price, it may be such a thing.
View detail
New car purchase was carried out and GASGAS EC250 was attached instantly. attachment is easy, and if form is carefully decided according to the Chamber, it will be considerably finished in a Beauty. Are not just going to go until the worried po
New car purchase was carried out and GASGAS EC250 was attached instantly.
attachment is easy, and if form is carefully decided according to the Chamber, it will be considerably finished in a Beauty.
Are not just going to go until the worried point is a little short and it is said fully that an expansion chamber is covered, but I think that it is satisfactory practically.
I think that it is one precious point since the goods of other Manufacturers are being lost to reduction of
2 strike.
View detail
Fits: TRIUMPH DAYTONA675 [DAYTONA] TRIPLE, TRIUMPH DAYTONA675 [DAYTONA] TRIPLE
Although it was probably management of an Exhaust pipe, there was nothing, but since the guide peg was hot, it attached with the measure. Since it is a partial thing, although carried out, I consider anticipation so that it may not so much change by
Although it was probably management of an Exhaust pipe, there was nothing, but since the guide peg was hot, it attached with the measure.
Since it is a partial thing, although carried out, I consider anticipation so that it may not so much change by the grade which became Massey a little.
Although the front is also written, a Swing-arm portion is worn.
If you think and buy
appearance and a soothing grade, it will not be disappointed so, but I think that it seldom changes since heat is radiated from others even if it attaches this.
View detail
[webike Monitor] Although it had equipped with the object for American one until now [ ], he is smart in a completely different class.
[webike Monitor] Although it had equipped with the object for American one until now [
], he is smart in a completely different class.
View detail
[Webike Monitor] Since VFR800 tended to have deleted an Exhaust pipe when it fell on the right (it was actually able to delete), it equipped with it. It was good to also hide a crack although it was slightly thin and uncertain touch. The
[Webike Monitor] Since
VFR800 tended to have deleted an Exhaust pipe when it fell on the right (it was actually able to delete), it equipped with it.
It was good to also hide a crack although it was slightly thin and uncertain touch.
The
effect is not known unless it falls (smile).
View detail
It was used having painted black. Since there was not Colet until now, the heel portion of boots melted with the heat of the muffler, and removing took time very much, but problem solving was carried out by equipping with this. I think that it was
It was used having painted black.
Since there was not Colet until now, the heel portion of boots melted with the heat of the muffler, and removing took time very much, but problem solving was carried out by equipping with this.
I think that it was good shopping since the design was also pleasing.
View detail
It purchased for the purpose of the dress-up up to XR230. Since the pipe of XR was overflowed as it was, although the sanding machine ? cut, it can be processed easily and was very easy to attach. Since a parenthesis is good although greater impor
It purchased for the purpose of the dress-up up to XR230.
Since the pipe of XR was overflowed as it was, although the sanding machine ? cut, it can be processed easily and was very easy to attach.
Since a parenthesis is good although greater importance was attached than to stepping stone prevention to appearance for the dress-up purpose up, it is very much satisfied.
View detail
It purchased as crack hiding rather than having called it silencer protection. Although it slid on the rainfall and the large crack entered, it hides entirely, and it is satisfaction 笙ェ free. -- Since I wanted you to make it the double-stick tape whic
It purchased as crack hiding rather than having called it silencer protection.
Although it slid on the rainfall and the large crack entered, it hides entirely, and it is satisfaction 笙ェ free. -- Since I wanted you to make it the double-stick tape which it is arbitrary and can be attached, the rubber boards of a band are four stars.
View detail
The full exhaust of FMF is attached to WR and this product is used. It seems that it falls to the temperature which does not melt while having locked, if it is this although the motorcycle cover was melted repeatedly until now. What was necessary
The full exhaust of FMF is attached to WR and this product is used.
It seems that it falls to the temperature which does not melt while having locked, if it is this although the motorcycle cover was melted repeatedly until now.
What was necessary was to attach early and just to have placed.
View detail
He wanted to attach the pure protector of DR-Z400SM to the power bomb of FMF, and bought this. What were used is only a band and a bolt. The protector part did not use. unexpectedly as good a thing as buying a band single article ordinarily --
He wanted to attach the pure protector of DR-Z400SM to the power bomb of FMF, and bought this.
What were used is only a band and a bolt.
The protector part did not use.
unexpectedly as good a thing as buying a band single article ordinarily -- or -- Since it is high ... if this is used, a pure heat protector can be used about.
the protector of this very thing came out fluently, and its texture was not quite satisfactory.
I think that it is structure of a price.
View detail
It introduced with full-exhaust-izing. Texture and form are satisfactory although slight length was horizontally good to a slight degree individually. Although the exhaust pipe is using the power bomb of FMF, if a band is rolled on both sides of t
It introduced with full-exhaust-izing.
Texture and form are satisfactory although slight length was horizontally good to a slight degree individually.
Although the exhaust pipe is using the power bomb of FMF, if a band is rolled on both sides of the portion into which the pipe diameter swelled, it can be attached without interfering.
(Wearing into the portion which swelled since the die length of the band was insufficient cannot be performed) Although vehicles are WR250X, the mesh washer (90201-05015) attached to the pure heat protector at the lower right of a photograph is diverted.
The heat transmitted from the exhaust pipe which contacts by this to the protector itself is suppressed to some extent.
Four mesh washers are needed.
View detail
Since the inner side of a right leg melted with heat, it wound around EX pipe. Cutting is also easy.
Since the inner side of a right leg melted with heat, it wound around EX pipe.
Cutting is also easy.
View detail
Firmly, by structure, since this portion is very well conspicuous, it is exchanged, and the bottom thinks that it was good.
Firmly, by structure, since this portion is very well conspicuous, it is exchanged, and the bottom thinks that it was good. View detail
if the cage of a fall and a pure heat guard are made full of cracks, and you rebuy it or - and a parts catalog are seen, it will take 4 or about 000 -- coming out -- is there nothing? It purchases by such a thing make it external parts if high. Al
if the cage of a fall and a pure heat guard are made full of cracks, and you rebuy it or - and a parts catalog are seen, it will take 4 or about 000 -- coming out -- is there nothing?
It purchases by such a thing make it external parts if high.
Also although there is a product with which the striker was also alike, since it is high, A-tech is chosen.
Although the covered area seems to have large strikers.
Now, the heat guard of delivered A-tech.
The aluminum tape for heat insulation was also attached.
There is also a portion which diverts the rubber and original manufacturer's product of a thread part in part.
It is made splendid and is a beauty result.
It is beautiful.
The logo mark is stuck on the back side and there is a high grade feeling.
I think that they are parts which can exchange easily and have impact.
View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
It is the impression of silencer heat guard long-term use of DAYTONA. It was used by VTR250, BALIUSII, and FZ1FAZER for protection of the prevention from a burn of a tandem, and a muffler. Although it is suiting an outside-diameter 95-145 pie cyli
It is the impression of silencer heat guard long-term use of DAYTONA.
It was used by VTR250, BALIUSII, and FZ1FAZER for protection of the prevention from a burn of a tandem, and a muffler.
Although it is suiting an outside-diameter 95-145 pie cylinder type silencer, it has attached to the LOCK-ON type variant silencer of nojima in FZ1FAZER.
[Using feeling] - texture A guard is the same aluminum as a one-yen coin.
Texture is not good.
I want you to sell buff processing and the thing which carried out anodized processing.
Stay is glossy so that it may be a product made from a stainless.
There is also no manufacturer logo and it is too simple.
The sticker is stuck and used in FZ1.
- Weight/durability Weight is light.
There is also no aged deterioration and it is durable.
- Attach. A hezagonal wrench and a driver are needed.
Attachment is also easy about time required 30 minute.
- In addition to this It does not get hot like a muffler appropriate for a heat guard.
Damage was reduced although the muffler had been thrown by the mounting state.
[Problem] If it removes after carrying out long time use, dirt will remain in the form of a band.
On the occasion of a carbon muffler, the small crack remained in the form of the band.
I think that it is the cause which has been thrown in the state where it equipped.
[The last] In the direction which attaches a motorcycle cover, a crevice is made between mufflers.
Therefore, it becomes the configuration of being hard to melt.
View detail
Since this one was smarter, the pure twist of DR-Z was also attached, but since it was too called the product made from a stainless, it had heat very well. Although it was not a degree which a rain jacket etc. solve, when it hit skin directly, the pur
Since this one was smarter, the pure twist of DR-Z was also attached, but since it was too called the product made from a stainless, it had heat very well.
Although it was not a degree which a rain jacket etc. solve, when it hit skin directly, the purer one of engine performance only by the appearance which was hot was high.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Since it is metal, it may be unavoidable, but it seldom insulates. It is fairly hot if it touches.
Since it is metal, it may be unavoidable, but it seldom insulates.
It is fairly hot if it touches.
View detail
The torque head pipe of the delta was equipped. Since the stainless band of attaching is long, it is necessary to cut depending on a pipe diameter. Moreover, since heat insulation packing is not attached, as it is, it has heat.
The torque head pipe of the delta was equipped.
Since the stainless band of attaching is long, it is necessary to cut depending on a pipe diameter.
Moreover, since heat insulation packing is not attached, as it is, it has heat.
View detail
They are purchase striped stripes as a dress-up up focused on appearance. If it attaches with the undercowl of the company, a sense of togetherness is and is pleasing. A pure heat guard is removed, and since it only attaches by bolt on, it can att
They are purchase striped stripes as a dress-up up focused on appearance.
If it attaches with the undercowl of the company, a sense of togetherness is and is pleasing.
A pure heat guard is removed, and since it only attaches by bolt on, it can attach immediately.
In the case of attachment, if not careful, it will interfere in a foot brake.
Although dry carbon was purchased, I think that a price is also appropriate.
View detail
Since it is comparatively cheap in a heat protector, it purchases. It improves giving a radius of circle to a side face compared with a front form etc., and company efforts are also seen. A price and a price are satisfactory although it is a prote
Since it is comparatively cheap in a heat protector, it purchases.
It improves giving a radius of circle to a side face compared with a front form etc., and company efforts are also seen.
A price and a price are satisfactory although it is a protector of only a necessary minimum part.
View detail