Reviews
Thank you very much!
I didn't feel the size up. View detail
Small size.
Installed on DS400.
Black painting has a subdued sheen and looks good in synergy with the small appearance.
View detail
Fits: YAMAHA Virago 250 (XV250), YAMAHA TW200, YAMAHA TW200E, YAMAHA Dragster 250, YAMAHA Virago 250 (XV250), SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy, YAMAHA SR400, YAMAHA SR500, HONDA FTR223, KAWASAKI Estrella RS, HONDA GB250 Clubman, HONDA magna fifty, KAWASAKI Estrella., KAWASAKI W400, KAWASAKI 250TR, KAWASAKI W650, YAMAHA TW225E, その他 22.2mm handle, YAMAHA TW200
good
I really like it I'll buy it again Packaging is neat and delivery is fast I'll spread it around I'm going to brag I'll buy it again View detail
Fits: YAMAHA Virago 250 (XV250), YAMAHA Virago 250 (XV250)
The best
It was great!
Design is so cool too!
View detail
One point
When attached to the license plate, it becomes a one point.
It is a Dice design, so it is unique and eye-catching.
The look from the Rear of the Motorcycle is a bit different.
The price is reasonable, so it is easy to buy and the quality is not bad.
View detail
Fits: YAMAHA Virago 250 (XV250), YAMAHA Virago 250 (XV250)
very likeable
Ideal Tank
Seriously, I wanted it.
View detail
In reserve
Good to keep in stock as a spare.
The price is low, so you can be assured that Stock is available even in the event of a sudden trouble due to Valve running out.
Brightness and quality are the same as Normal valve.
View detail
Fitted for heat protection
I installed it because my calf sometimes touches the Exhaust System.
This will help you avoid burns.
The exhaust system is narrow when installed, so the band was changed to a small diameter Stainless Steel Band.
View detail
For the License Plate Light when the Fender Eliminator is used.
Very Small, Stylish, and Refreshing in appearance.
Installation is easy, as it is simply affixed with double-sided tape.
The light was bright enough for a License light.
View detail
It looks good on the body of the car.
I was looking for an exhaust system that would suit my 250TR and it looked good, so I bought it.
It was about 20,000 less expensive than a new OEM set and cheaper than a good used set.
The fact that the Buffing Hanger is not Polished but Black and the matching Matte Black with Black Engine are available was a deciding factor.
It is also a point that the shape is cute with TRAN petType.
I am an amateur motorcycle user, but I was able to replace it without any difficulty.
The sound quality is powerful and not pretty.
The inner silencer already had some paint peeling when it arrived, but the body was clean without any scratches, so I thought it was okay. It will be black with soot anyway...
View detail
Fits: YAMAHA Virago 250 (XV250), YAMAHA Virago 250 (XV250)
Nice old school look
This air cleaner kit not only looks amazing but fits right up in place of the stock pod. Main pipe section comes raw so just needs some paint before fitting or you can leave it bare. The chrome finish of the air cleaner itself is great quality. I like how you can tune the air flow amount with the adjustable valve piece. Definitely recommend if you're after an old school look View detail
It's solid.
We decided to replace the 3-pole and 9-pole coupler on the Speedometer side, which had deteriorated significantly over time. Since I did not touch the body side, I purchased only the female coupler without the terminals, so I also purchased these terminals. All you need is 1Quantity:2pc. I had only a set, but I thought I didn't need a lot of it, since the price was so high for a small number of items, but it was a good value for money.:I chose this one with 1 Set of 100pcs.
As for the product, although some of the bends were not so good, it was firm with appropriate thickness, and it fit into the coupler tightly.
There are still quite a few of them left, but the 110 coupler is used in various places, and there may be times when you want to modify it, so if you have it, it will come in handy sooner or later.
View detail
Perfect
all the assembly went well, the delivery also despite a logistical problem but nothing serious and the products were very well packaged. the user manual obviously in Japanese but helped with the image so installation without problems. I recommend this seller! I am satisfied! View detail
Not bad at all
I was looking forward to get some quality terminals .so I finally found it . thickness of the female terminals are very normal compare to the male terminals .overall product is good this spade terminal connectors are damn good .quality is superb .no need to crimping so hard .highly recommended. value for the money. View detail
Quantity:Pair (for Left and Right) It's a single product, not two, it can't be...
This product is not listed on the product Page, but this product is Quantity:Pair (for Left and Right) The price is for one piece only, not a whole lot more.
Please be careful when purchasing.
View detail
Fits: KAWASAKI VULCAN900 CLASSIC400, KAWASAKI VULCAN400II, KAWASAKI VULCAN400, KAWASAKI VULCAN DRIFTER400, KAWASAKI VULCAN DRIFTER400
For Idling Adjustment Knob Move
Used on VULCAN 400 (1999). The Idling Adjustment Knob located underneath the OEM air cleaner is difficult to use. In order to make the Idling Adjustment Knob easier to use, I installed this product which is a smaller type than OEM. As a result, the Idling Adjustment Knob can now be moved to the same height as the Cleaner and can be adjusted without disturbing the riding position. The quality of the product is fine, but note that you will need to prepare a 2.5M Hexagon Nut. View detail
Fits: HONDA Steed 400, HONDA Steed 400, HONDA Steed 400, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 400, HONDA Steed 400 VSE
goodgoodgood
It's not worn yet, but the parts and quality look good. I'll leave a review again when it's rigid and installed later haha It's not worn yet, but the accessories and quality look good. I'll leave a review later when I'm wearing it after the rigid one View detail
Fits: HONDA Steed 400, HONDA Steed 400, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 400
goodgoodgood
After installation, the sound of air coming in is very good
There are missing parts when installing, but it can be easily solved
Haha It is a recommended part if you ride a Steed.
Haha I bought it because it is much better than a genuine air cleaner
I think it would be good to feel it. ------------------ After mounting the air coming out of the air
There is a lack of parts at mounting, but it is easy to solve
I would like to buy it because I would like to feel it.
View detail
Fits: YAMAHA TW225E, YAMAHA TW200E, YAMAHA VIRAGO250(XV250), YAMAHA VIRAGO250(XV250), KAWASAKI ESTRELLARS, HONDA MAGNA 50, HONDA GB250 CLUBMAN, HONDA FTR223, KAWASAKI W400, KAWASAKI W650, KAWASAKI 250TR, KAWASAKI ESTRELLA, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, YAMAHA SR400, YAMAHA SR500, YAMAHA DRAGSTAR250, YAMAHA TW200, Others 22.2mmHandlebar
You look good in many ways.
I like the fact that it is mismatched with the car body.
Normally, BlackGrip would be a better choice, but I felt that the Raw Rubber look would give the car a more old-school look.
Rubber quality is not bad either.
good point
It's also reasonably thick, so there is little vibration.
It will look like a VINTAGE.
It looks good on any type of car.
The Diamond pattern may look good on some cars and not on others, but I think it looks good on most large cars.
View detail
Fits: YAMAHA Virago 250 (XV250), その他 (22.2 mm handle), YAMAHA Dragster 250, YAMAHA Virago 250 (XV250), YAMAHA TW225E, YAMAHA TW200E, YAMAHA SR500, YAMAHA TW200, YAMAHA SR400, SUZUKI Glass Tracker Big Boy, SUZUKI glass tracker, KAWASAKI 250TR, KAWASAKI Estrella RS, KAWASAKI Estrella., KAWASAKI W650, KAWASAKI W400, HONDA GB250 Clubman, HONDA FTR223, HONDA Magna 50, その他 (22.2 mm handle)
It's normal. This is fine.
It's a very ordinary Grip.
Normal is best. Easy to grip, moderately soft, and moderately thick. This is the Grip.
good point
Fee Ring is close to OEM.
It's thick enough that your hands won't get tired from the vibrations.
Installation is easy with Parts cleaner and glue.
The shape is not too assertive, so it blends well with any custom.
It is very cost effective.
Grip should match your own senses.
View detail