Reviews
Fits: KAWASAKI 250TR, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLARSCustom, KAWASAKI Eliminator, KAWASAKI Eliminator, KAWASAKI ELIMINATOR 250LX, KAWASAKI ELIMINATOR 250LX, KAWASAKI ELIMINATOR 250LX, KAWASAKI ELIMINATOR 250LX, KAWASAKI ELIMINATOR 250SE, KAWASAKI ELIMINATOR 250SE, KAWASAKI ELIMINATOR 250SE, KAWASAKI ELIMINATOR 250V, KAWASAKI ELIMINATOR 250V, KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI W800Special edition
It seems like a geniune parts and fits well
It fits well on my w650 and the quality seems like geniune part from Kawasaki. I would know about the duration after sufficient uese View detail
Stiffer than OEM
It is stiffer than OEM.
Touring about 300 km is not a problem, but it may be hard if it is more than that.
It looks good and the price is more reasonable than other brands, so I think it is worth buying.
View detail
COSPAC GOOD
This is a replacement from K&N.
It was cheap. And Plating lasted a long time.
I'll see if I can get it for you.
View detail
Fits: HONDA GB250 CLUBMAN, KAWASAKI W400, KAWASAKI 250TR, KAWASAKI ESTRELLA, KAWASAKI ESTRELLARS, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, YAMAHA SR400, YAMAHA SR500, YAMAHA VIRAGO250(XV250), YAMAHA VIRAGO250(XV250), YAMAHA DRAGSTAR250, YAMAHA TW200, YAMAHA TW200E, YAMAHA TW225E, KAWASAKI W650
For VIRAGO 250.
It turned out pretty cool!
Clutch Wire、
Refreshing is better to replace Accelerator Wire and Choke Wire!
View detail
Custom seat
Compared to OEMs, the seating comfort is,
However, Parenthesis is by far the best looking.
I highly recommend it!
The process is simple and anyone can do it!
View detail
W650 going Bratstyle
Looks great, easy to put on, but left a 15mm gap where it didn't touch the rear frame hoop. I took off the 4 rubber bumpers and removed the spacer that came with the seat (to go under the lock posts?) I also took off the lock mechanism on the frame to remove the 2 slim washers underneath. This brought the gap at the rear down to 7mm - much better! Overall, a slim, tuck and roll seat for little money. Very pleased. View detail
Seat replacement after much agonizing
I was riding Yamaha Bolt R-Spec with Normal seat and Gel pad, and I dropped the air pressure of Rear to 2.3 Kg. (at your own risk). The uneven road surface vibrations are transmitted to the buttocks,
Soft and fluffy Seat (Overseas products) or Spring Seat (OEM or overseas products) exchange to
Rear suspension replacement (YSS etc.)
I considered it, but all of them are quite expensive, and YamahaOEMSpring Seat is hard to get nowadays....
I found this Seat and purchased it because of the reasonable price and the Web!ke limited time point bonus.
Type is your own preference. Tuck roll." to
As others have mentioned in their impressions, Rear bracket Quantity:Since the 2pcs may interfere with the Rear Fender, 3mm thick Cushion material is attached (see photo).:4)
The material is also attached to the rear bracket and the two rear fender fixing points.:Aluminum 3mm Spacer (Photo):6)。
In this state, when viewed directly from the side, the Rear bracket Quantity:The 2pc and the rear part of the Seat itself are slightly floating from the Rear Fender. We do not tandem, so this condition is fine, but if you tandem, the weight of the occupant may cause the Seat itself and the rear Spacer Quantity:I think part of the 2pc will interfere with the Rear Fender, so be careful.
Seat forward center positioning adjustment is forward Bracket mounting Bolt, rear mounting position adjustment is rear Quantity:It can be done with a total of 4 screws, fixing 2pc of bracket.
After replacing the Seat, we ran a test run for about 100 km, and this is our impression,
It is narrower than the Normal seat and seems a little stiffer, but it is not uncomfortable.
I feel that the degree to which uneven road surface vibrations are transmitted to my bottom has been reduced. (Thickness? or SeatMaterial?) 。
I feel that the Position is a little forward, closer to the Handlebar.
We will go with this Seat for the time being.
I am satisfied with both performance and price.
View detail
Screw has been cut off!
I was able to install it with no problems, but it was running,
The Screw for mounting the License Plate stand broke off in the middle.
View detail
Fits: YAMAHA Virago 250 (XV250), YAMAHA Virago 250 (XV250)
Pretty cool.
It is a bit pricey,
cool
View detail
Fits: SUZUKI glass tracker, SUZUKI glass tracker
(very) satisfied
Lens is painted in yellow color, but the brightness is neither good nor bad! View detail
Tuck Roll Seat
Replaced from W650 OEMSeat.
I am 154cm tall, so I was worried about my footing with the OEM Seat height, but after replacing the Seat, I was surprised to see how much better my footing was.
I'm short. "Standing gore" I thought Lowdown was the only way to solve my anxiety about the "I'm satisfied with Large", but I was able to solve my anxiety just by replacing the Seat.
The width is narrower than the OEMSeat, which allows the feet to be lowered directly down for better footing.
However, if I ride long distances, my buttocks hurt so much that I get BigLi. (Lol)
I may be limited to 30 km on the street. More than that and your buttocks will be sore.
Pain in the buttocks is not a problem if you can tolerate it.
The problem of not being able to reach my feet has nothing to do with patience or anything else. (Lol)
I am glad I bought it. It is a good Seat.
View detail
Cospa good
I chose this product out of many different Seat products!
It is inexpensive, well-made, and the most cost-effective.
It attaches without any problem.
View detail
Required for Injection Cars
Required for Injection
I think it is well made and there are no problems.
Installation is easy
View detail
Fits: YAMAHA Virago 250 (XV250), その他 (22.2 mm handle), YAMAHA Dragster 250, YAMAHA Virago 250 (XV250), YAMAHA TW225E, YAMAHA TW200E, YAMAHA SR500, YAMAHA TW200, YAMAHA SR400, SUZUKI Glass Tracker Big Boy, SUZUKI glass tracker, KAWASAKI 250TR, KAWASAKI Estrella RS, KAWASAKI Estrella., KAWASAKI W650, KAWASAKI W400, HONDA GB250 Clubman, HONDA FTR223, HONDA Magna 50, その他 (22.2 mm handle)
I like normal things like this.
A little thicker, feels good in the hand, feels right at home.
Good texture and normal appearance without being noticeable.
I have it on Condor and it fits in very well.
View detail
Fits: YAMAHA VIRAGO250(XV250), YAMAHA VIRAGO250(XV250)
VIRAGO250Chain
This is my second purchase.
I like it because it is easy to install with a clip joint and inexpensive.
View detail
Good product at a reasonable price.
I chose them based on price from a number of companies, but I am satisfied with the QUALITY, which is more than I had imagined.
Quantity:1pc. eye photo
Material:Stainless Steel Body with Rubber packing and Material:Waterproof performance cannot be guaranteed and is for reference only.
Second and third pictures
The front fork boots and Fender mounting screws were loosened, and the EmblemHolder stays were inserted into the gap between the front fork boots and Fender.
View detail
Fits: YAMAHA Virago 250 (XV250), YAMAHA TW200, YAMAHA TW200E, YAMAHA Dragster 250, YAMAHA Virago 250 (XV250), SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy, YAMAHA SR400, YAMAHA SR500, HONDA FTR223, KAWASAKI Estrella RS, HONDA GB250 Clubman, HONDA magna fifty, KAWASAKI Estrella., KAWASAKI W400, KAWASAKI 250TR, KAWASAKI W650, YAMAHA TW225E, その他 22.2mm handle, YAMAHA TW200
Cosmo!
It was a replacement of OEMGrip for W650 and I think the atmosphere is very nice.
I especially like the Custom and old car feel.
I thought the Normal grip had a harder grip feel and was a little thin,
After the change, the grips have a moderately soft feel and the diameter is thicker, making it a good fit.
I didn't expect the workmanship because it was cheap, but there was no BALI and it was done well.
I think it is made.
View detail
Good footing!
The footing is much better. The quality is much better than the usual suspension that costs several thousand yen. View detail
Power up from OEM
Aluminum Cut-out was chosen due to deterioration of OEMRubberPedal on used DS250.
METAL feeling maStripe si
View detail
It is easy to install.
It is essential for Ska tune. it is easy to install. but when I look at it after running it, it is overflowing a little bit of Oil. View detail