Reviews
It's broken
It's been great to use and no pain in my back, but it broke cleanly after about 7-8 months. It may not be strong enough. I would like to see a different attachment method or an increase in the thickness of the steel plate. View detail
3cmLowdown Seat for PCX160? Is it really lowdown?
My wife's beloved PCX160, almost one year since we bought it, still 400km,
My wife is not very tall, so her footing is a bit awkward on the PCX, and when she stops at intersections, she has to stand on one tiptoe.
It seems to be a bit large in places where the Left Side of the road is slightly sloped when touring.
I tend to shy away from riding PCX on a regular basis as well,
If it had a little more leg room, it would be easier to ride. and
I was thinking about Lowdown, and while researching on the Net, I found that this Lowdown Seat improves the footing by 3cm, so I bought it.
If the footing improves by 3cm, I would be a sole sticky myself, before I took the delivered product out of the corrugated cardboard and put it on.
First I sat on OEMSeat by myself to check the footing, then I replaced it with this Seat and sat on it, but the footing has not changed,?
I tried again to change back to OEM, but the footing is still the same...,
I called my wife to try it, but she said it was the same.............she cried
I tried on a pair of Boots with a 3cm heel and the footing was better.
It says in the product description that it improves the footing by 3cm,
I'm sure WirusWin doesn't check the footprint of individual products.
In the notes, it says that each product is handmade, so there is a margin of error for each product.
Is that the result of this?
Is the product itself leather? Synthetic leather? The back of the product is labeled "Made in Fillipin".
Installation was easy, only took a minute or two.
The product itself is custom type and looks reasonably cool, but the seating is hard.
Is it because it's new? My wife says that I can't go out for a long trip with it........
The OEM is softer and better for the same footprint.
In the end, I returned to OEMSeat.
As explained in the explanation, this is only for sunny days, as there are also holes for ventilation and rainwater can enter through the holes!
Seat cover is also needed for rain when going on long trips or overnight runs.
If this is true, I would like to return it, but the included note says that under no circumstances can it be exchanged, returned, or returned Gold after it has been installed. That means I can't try it out with the footwear on, right?
I wish you would test the footing of this product before shipping and guarantee -3cm!
I was wondering what to do.
My wife said I should keep it in storage as a spare, I cried.
I wish webike would try this product if they sell it!
View detail
Installation requires modification.
As shown in the product image, the OEM Carrier cannot be attached to the Flat, but the DoubleCarrier is attached on top, so it cannot be used in combination with the Second seat.
Even when not used in combination, the OEM Carrier interferes with the system, so modification was required to install the system.
View detail
This product is no good.
I can't install it, it doesn't fit at all. View detail
About the difference in the air filter insertion diameter
Air Filter plug-in diameter φ38, whereas φ50 or so was included.
Installation was over a month old because we had hired an outside party to do the installation.
Webike could not even contact me to return it because it had been over a month.
I contacted WirusWin and hoped they'd take care of it.
We will not be able to respond to orders placed by other companies. And, contact me!
Although sold by other companies, products produced, packaged, and wholesaled by WirusWin
I'm sure you're right, but how would you respond?
I want them to be responsible for their own products, and I don't want Webike to put a time limit on initial defects.
Also, I was shown the Installation Instruction Manual, but with two or three photos on WhiteBlack Copy paper.
It was hard for a layman to understand.
I will never buy from them again.
View detail
Not as described.
I bought this product because it said it was compatible with the '91 D Tracker, but the position of the screw fixing hole does not match.
To be honest, it was a waste of time.
If you are considering this for your old D Tracker, don't buy it.
It's a bit of an inch.
View detail
It might be good for STREET type.
I bought it to try it out because it was cheap.
It's slim and parenthesis is good, the price is good for Stainless Steel.
It's quite a buzzing sound.
I wonder if it would look good on a Chopper or a youngster.
good point
■Material:Stainless but cheap.
It looks great on the Chopper Custom.
The bank angle can be taken there.
Not many people are wearing it.
The high rpm turns quite well.
A bad point
It's a blast to say the least, so be careful Idling.
Carburetor setting is quite off.
It's cheap but well made with Stainless Steel.
I think it's an interesting White Exhaust System.
View detail
Fits: YAMAHA SR400, YAMAHA SR500
Ha Gap was it …
I bought the thing to try it out.
I think this price is cheap for Stainless Steel Exhaust System.
The sound is also highly rated.
But …Crack appeared in Exhaust SystemBody after about 6 months (lol).
good point
It is cheap for Stainless Steel Exhaust System.
Contributes to weight reduction of the vehicle body.
A bad point
I think the strength is low. Crack will appear in 6 months …
I thought Design was not good.
I think it's controversial because there are people who don't fit in, but I didn't fit in ….
However, this manufacturer has released Exhaust System for various car models, and it's made of Stainless Steel, so it's worth choosing!
View detail
Worst Exhaust System Ever
I ordered to replace the exhaust system when the car was delivered, but I was surprised when it arrived. The paint on the silencer end cap was not hardened properly and was sticky to the touch. The exhaust system that I do not want to install in a new car with a conspicuous color baldness arrived.
Webig accepted the return, which was helpful but quite disappointing.
There is such a Manufacturer, so I think I'll do a thorough investigation and purchase next time.
View detail
I bought this for my SUPER CUB 50, but I can't use it.
I bought this for my CUB50 to fit as per the title, but when I tried to install it, the brake pedal interfered with it and it was unusable!
You may be able to use it if you want to process it, but if you don't have the skills, I can't recommend it.
View detail
Please make a Cancellation.
I don't know, I haven't received it yet. View detail
Measures against secondary air contamination
I fixed the problem with the mounting bracket with my own modification, but the problem of secondary air contamination remains.
As you can see in the attached photo, I used 38φSiliconHose(180°Elbow) to make etc. diameter pipe, and implemented secondary air mixing measures.
I'm happy to get the original performance of the Power Filter, but if I have to go to this much trouble, it's much easier and more economical to use other parts.
View detail
Mounting Bracket does not fit * Requires processing.
There was no column for JC92 before, so I described it for EBJ-JC61 and ThailandSpec.MSX125, but if you fix it to the car body with the original mounting bracket, the Side cowl (Shroud) will interfere with the cowl and the cowl will not be attached.
You need to cut the mounting bracket and make your own craft as shown in the attached picture.
The photograph shows the situation in the middle of the second trial and error. Because the connection part with the Suction pipe of the Throttle body is only a fitment, secondary air enters by vibration etc. even with this.
I regret that I should have bought another company's Power Filter instead of going through this trouble.
View detail
It says the item has been shipped, but it doesn't specify the Yamato slip number, when will it arrive?
It says it's been shipped, but there's no Yamato tracking number on it, so I don't know when it'll arrive! View detail
I hope it will be delivered soon.
I've been informed that it's going to be in July, but I'm hoping for delivery as soon as possible! View detail
Ordered yesterday, paid, still no confirmation etc. I don't know when it will arrive.
Sound is cardiopulmonary, but there's no confirmation yet, so I need to hear from you. View detail
JC92 needs to be modified.
I use it on my JC92.
It cannot be installed without processing.
If you fix the cowl with the mounting bracket, the side cowl (Shroud) will interfere with the cowl and the cowl will not be able to be attached.
I cut the mounting bracket and bought a pipe clamp and bracket at Mome Center.
I regret that I should have bought another company's Power Filter instead of going through this trouble.
View detail
out of the question
The 12-inches on the Address?125 raised the ride height of the car, so it was not possible to install it, although it was purchased to alleviate this.
To be precise, it could not match with the body of the car, and the back of the car was considerably floating. If you push in hard, you can lock Seat lock, but it is not practical.
During the trial and error process, I removed some Parts of Seat and couldn't even return it, so it was completely jammed.
Later on, I thought this might be for the 125S? I tried the Helmet In Box for the 125S and it installed beautifully...
I wasn't wrong about the matching model, but this is the situation. Please be careful.
View detail
Dissatisfied
The OEM Blinker Coupler does not go through, although it is a compatible model
We can't even process it because of the steel;
We have no choice but to cut and process the wiring
View detail
Fits: HONDA ZOOMERX, HONDA ZOOMERX
It's been 3 years since I bought it and the bracket was broken
Fatigue fracture by vibration immediately after purchase I welded it up and continued to use it, but today it was broken by a drill from another place than the reinforcement As expected, I gave up on Repair I'll buy another one View detail