Reviews
works well and easy to use
Quick to adjust, excellent hold on the clutch to tighten nut. I would definitely recommend this product (tool) for anyone working on bike engines and proper maintenance on their bikes. Used on both my clutch, and my flywheel. This tool worked well and saved me alot of time when disassembly and rebuilding my motor. Built with quality and easy to use. This tool is a must for engine rebuilding View detail
Perfect for Chain cleaning!
I bought it with ChainOil and MaintenanceSTAND because I found Rust after a short while of riding in the rain.
The shape was made for Chain and the bristles were hard and good for removing Rust.
I feel that it can be applied evenly when applying Oil.
View detail
Smaller than expected, but totally does the job. Very durable
This didn't fit perfectly as I had hoped, but I can't fault it much since it is a universal design. Some reviewers are complaining the tool is susceptible to damage - since it is aluminum and basically designed to jam the equivalent of a miniature wood chipper, you shouldn't expect it to withstand substantial torque. I bought two just in case and used them to do a valve job on my 2013 crf450r instead of the expensive factory Primary Gear Block tool without removing the clutch. I was able to jam the cam gears as well as the primary gear, though I was careful not to transfer too much force onto the cam chain by using secondary locking methods to spread the forces. I also used it as a secondary lock in conjunction with a large crescent wrench for removing the flywheel, eliminating the need for the pricey factory Flywheel Holder tool. NOTE: There is nothing in the Motion Pro line designed for automotive repairs. Though it may work on cars, this tool is intended for motorcycles. View detail
Perfect tool for the job!
I was a little skeptical about this tool working as promised, but I'm happy to say it got the job done pretty well. ther than the fact that you need both tools, it was worth it for me because I have multiple bikesDefinitely recommend to have for steering stem bearing removal and installation!! Makes a dreaded job so simple. Takes longer to set up tool than to get the bearing off. No cutting, no beating. Pulls bearing off with NO damage to stem or clampsWish they were not as expensive as they are since it's such a specific application but it really does work like a charm. View detail
You can throw away everything but this.
The price seems high, but I have been using Quantity:I was using that hard-to-use example guy for about 5pcs.
I threw them all out a few years ago, but for some reason I bought them on Astro this past February, and when I used them, … yahari… they're so hard to use!
If the fixture is a Quantity:2pc. I bought the one with the Set and was expecting a little more, but…
I have purchased and used this one and my impression is as others have stated in the Title. [You can throw away everything but this. is one of the choices! is
I just purchased it from Astro and would like to give it to a friend. w
View detail
Convenient
Fluid replacement time is totally different without it. I use Astro's One-Way Valve. Highly recommended! View detail
It is a good Brush.
It washes Chain well.
You can wash the Tire by simply turning it by hand to scrub it.
It would last about two years.
View detail
Easy to use
Small Spring hook, but I use it differently depending on the situation.
It is often used for relatively small springs for exhaust pipes and side stands.
Compact but can be pulled on and off firmly, so it is easy to put on and take off.
View detail
Easy to use
Drive chain can be cleaned efficiently.
The Chain is very easy to clean because three surfaces can be polished at once:the reverse side, the front side, and the roller section.
The hardness of Brush is just right to remove dirt.
View detail
You can throw away everything but this.
[How is it used?
of those already using it. Throw away everything but this." The first time I bought the product was when I saw an impression of the product.
It took a lot of courage to invest nearly 5,000 yen in a wire injector, but I was dissatisfied with all the wire injectors I had used so far (*such → https://www.webike.net/sd/2073358/), so I decided to take the plunge and buy one. I was not satisfied with all the wire injectors I have used so far, so I decided to take the plunge and buy one.
In case you are wondering how many times the general wire injector has been replaced (tightening Dial is Quantity:2pc. I have a Set! (and as a result of buying more every time there was a change), so I have 3 or 4, but I don't use them at all.
Classic "Put engine oil in a Vinyl bag and hang it up. This is because you can't hit a Tai KATANA on the method.
Was the one you received as per Image?
As per Image
Translation (Instruction Manual for enter here is included and easy to understand.
How was your experience with it?
Perfection!!!
The oil was perfectly lubricated, with no spurts of oil from the gaps.
What's more! We want to carry out the process of flushing out the dirt inside before lubricating, but until now, the only way to do this was to completely remove the Wire and put it in and out of the kerosene container by hand...etc.
However, with this product, after Parts Cleaner is sprayed, it can be quickly pressed down for cleaning at a great speed.
Gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo!
[Points to note]
The inside rubber packing is oriented.
You will not make a mistake because it is written in the Instruction Manual, but if you lose the Instruction Manual (and you probably will), take a close look at the shape of the Case and Packing to make sure you do not make a mistake.
If you look closely, you can see that the Taper is different!
Also, the Button part to push in is hard at first, so lubricate Large.
If it's not lubricated, it just hurts the belly of the finger that pushes it in.
How did it compare to other products?
The other Cable injector is Garbage.
Replace it now and throw it away.
Points and hangs of ▼ installation/Items to be purchased together/Opinions and requests to the Manufacturer
Other Cable injectors usually have the Body as Material:Aluminum, which is a material with a Body:Plastic, so I'm a little concerned about hydrolysis over time.
View detail
Easy to use, helpful
I purchased this product for daily maintenance.
The following is a brief introduction to the ChainMaintenance flow:1.
Wash car→Clean with Chain cleaner and Chain brush→Lubricate with Super chain oil
This Brush can be cleaned in just the right position. Thank you for your help.
View detail
Rakuraku Chain brush
The U-shaped Chain brush has short, stiff bristles on three sides, making it very easy to clean!
Regular Brush is only one side of the Large body, which makes it much easier to clean, and shorter!
The other side also has a long tipped Brush, but I personally don't think I'll have much chance to use it, so I wish they would remove that part or make the tipped Brush a little shorter.
View detail
For Harley Clutch Adjustment
Bought this to adjust the clutch on my Twin cam.
It was easy to use, accurate, and did its job well.
Adjustment requires a separate 7/32 HexaWrench and 17mm Glasses for this tool.
View detail
Convenient and easy to use
At first I was doing my best to scrub with the brush attached to the WAKOS Chain cleaner, but when I found this, I was amazed at how convenient it was. I was surprised that there was such a useful thing, so I bought it on impulse.
I've used it and it's really convenient! LOL!
I can do all three sides at once. (Each one is separate in a sense, pressing against the area you want to polish.) Definitely a time saver!
And it polishes surprisingly well and cleans properly!
But if you want to get rid of the stains without leaving any details, you should do it carefully and carefully as if you were brushing your teeth with the brush attached to WAKOS. I thought.
But I honestly use it without any problems at all because it cleans up well enough for me lol.
Because there is no breakage of Brush especially though I used it with dozens of times already, I thought that it was considerably excellent also about durability.
The price isn't that high, so if you're doing detailed chain maintenance, I'd recommend using this because it's easier and faster!
View detail
To ChainMaintenance
[How is it used?
I purchased this for Chain maintenance
There is no problem with the cleaning power, although the Brush gets damaged a little bit.
Was the one you received as per Image?
The three-sided Brush was as Image, but I'm not sure about the use of the Brush on the other side.
[Points to note]
The three-sided brush will get dirty with use, so you should wash it with Parts cleaner every time you do ChainMaintenance.
The items you should buy together are Chain cleaner, Chain lube, and Maintenance Stand to float the rear wheel.
View detail
You can throw away everything but this.
[How is it used?
I used to use this type of Cable injector (https://www.webike.net/sd/2073358/), but I wasn't satisfied with it because I didn't feel like I was getting the lube in and it was leaking out.
I heard rave reviews about this product on the Net and wondered if it was true. I thought so I bought it and tried it.
Was the one you received as per Image?
As per Image
Other than that, there is a translation (Instruction Manual of input here is included) that YAZAWA-san may have put in. It is an easy to understand Instruction Manual.
How was your experience with it?
I was able to lubricate it without the lube leaking out due to its shape.
The Stress of lubricating the wires is gone. It is the best.
[Points to note]
There is a direction to the Rubber packing which is shaped like a piece to be put inside.
It is tapered, so you have to frame it so that the taper works.
How did it compare to other products?
The other Cable injector is Garbage. Buy a new one now and throw it away.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I think more people would be happy if it were cheaper.
It's a good buy because things are good.
View detail
Triple your speed.
You can clean all three sides of the chain at once, including the back and front of the side plate and the rollers. The brush is just the right hardness to remove dirt and grime. View detail
Easy to use and easy to clean
[How is it used?
When you wash your car, you also want to maintain your chain.
I've used it a few times since I bought it, and while the Brush does get a little sore, I have no issues with its cleaning power.
However, since both the brush part and the handle part are plastic, it seems to be better to exchange it after using it to some extent.
Was the one you received as per Image?
This is the Brush attached to the other side of the three-sided Brush, and it was longer than I thought it would be.
This makes it useful when you want to polish the periphery of the Driven Sprocket.
[Points to note]
It is too obvious to say, but it is dangerous to run the engine and rotate the rear wheel during chain maintenance.
Also, remember to wear military gloves for safety when working.
Items that should be purchased together include Chain cleaner.
There are a variety of products here, so please consult with price and performance before purchasing.
Also, if your vehicle does not have a center stand, don't forget to prepare a STAND to raise the rear wheels.
View detail
Bearing can be driven vertically.
[How is it used?
I bought this to replace the Bearing on my Wheel.
Was the one you received as per Image?
You can find a lot of people who are interested in this type of product.
How was your experience with it?
I bought this to use when typing up my new Bearing.
I thought Hammer would be fine, but since this is my first time doing this, I thought I'd buy a solid tool.
It's a pretty good price. This.
I don't know how many times I'll use it in my lifetime, but it's easy to use and looks cool! w
You need to be prepared to buy it as it's cheaper than ruining your Wheel by making a typing mistake, but it's easy to use.
[Points to note]
It doesn't come with an instruction manual. I used it for Fee Ring, but I don't know if I need it or not.
But I was able to hit it solidly.
How did it compare to other products?
I think it's more reliable and easier than doing it with Hammer alone.
This is my first purchase so I was excited.
Other items that would be helpful
If you have Bearing Puller, this installer, and Snap ring pliers, there is nothing to be afraid of.
View detail
The easiest to use wire injector ever!
I bought this one which caught my eye because I didn't like the operation feeling of Wire injector of common Type.
It is the method that the end of the Wire is jointed to the body of the cylinder shape, Grease is injected into the inside, and Grease is pushed in directly with the piston of the upper part. It is overwhelming smallness of the leak that should be noted, and it is transmitted that it is possible to oil quite efficiently from the appearance of the Grease which overflows from the lower end of Wire. Although I am not accustomed to it, I lubricate Clutch Wire and Throttle Wire, and I am satisfied with a new operation feeling that has never existed before.
Probably it is made overseas, but because Instruction Manual of the translation (please input here) is attached by the agency, it was able to use without a problem. There was an impact to dispose of the Wire injector which I had been using immediately. The price is reasonable, but I felt it was reasonable when I saw that Cylinder and Piston are made by SeaRing firmly. I recommend it.
View detail