Reviews
Fits: HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M
Too slippery.
Crf250rally50, thank you md44 for your help, I also purchased it for the proper Position
The material of the outer skin is rough non-slip fabric that sticks to the pants like magic tape, so I can't slide my butt on it.
Regular Seat fabric would have been even better.
I have applied Silicon spray as much as I want to help my butt slide, but it still gets stuck.
It is better to replace only the Seat cover.
I like the Seat shape.
View detail
Fits: KAWASAKI KLX125, KAWASAKI D-TRACKER125, HONDA XR50Motard, HONDA XR100Motard, Others , HONDA DAX125, HONDA CL250, YAMAHA XSR125
For Dax125
Installation was easy as I just put it over the Seat.
It looks good.
Mesh and breathable, so in winter my butt is cold. It seems to work well in summer.
Cushioning is also possible, but I haven't ridden it for a long time, so I don't know yet.
Since it was winter when I purchased it, I will remove it now and use it in the summer.
View detail
Fits: KAWASAKI ZX-4R, KAWASAKI ZX-4RR, KAWASAKI ZX-25R
Great sport seating position, good for city as well!
I am 175cm tall, and after installing the seat, I am able to stand on the balls of both my feet. WIth the original seat, I am able to place both feet flat on the ground. The raised seat makes me lean forward slightly more, reminding me to grip the tank with my legs rather than leaning on my wrists. Seating position is more sporty compared to OEM seat, i.e. sitting on top of the bike rather than inside the bike. Comfort is perfectly fine for street. If it is too harsh, perhaps you can adjust the compression and rebound settings on rear shock. Installation is easy - you will have to partially remove the side fairings to access some screws. It is NOT a drop-in replacement. Access to battery and fuses will be inconvenient after installing as you will need to remove fairing, screws and seat mount, before accessing battery and fuses. (It should not matter much but good to know information). Be careful not to strip the OEM bolts near the tank, they are very soft. Deduct one point as rubber seat provided has holes that are not very accurately cut, impacting the positioning somewhat. You might be luckier than me. Product shipped about 1 week earlier than estimated. Overall very satisfied. View detail
FACTORY EFX Seat cover ALLGrip
crf250lmd47OEMSeat cover had a tear and I replaced it with Other Brand Product because I had to. I bought this product this time. The shop said that the Seat fabric was hard and sometimes tore when pulled and tucked. Still, I was satisfied with the beautiful reupholstery. Is there room for improvement in the quality of the fabric? View detail
Uncoated and used
I wanted the high seat set up on the Z125, but it was about 30,000 on ebay!
I couldn't afford that kind of price for Seat in SL, so I made it myself.
Ancho is a 20mm thick Sponge sold in Jungle for about 600 yen, OriginalCover is removed and glued.
Shave it with a grater Gold to shape it and cover it with this product.
The SIDE of the original anchor was cut off to fit.
The surface of the Seat has a non-slip Tank Pad-like texture, and the Grip has been increased.
The OEM has a glued front edge corner so it fits better, but this product has a thicker fabric and sewn finish so the corner fit is a little worse, although it is not very visible once installed.
Also, the anchored area interfered a little with the Rear Sets and I had to push it in quite a bit to get it to lock.
I think the price is low enough for the front and back, but I only used the front, so it would have been even better if the price was lower for the front and back separately.
View detail
Fits: KAWASAKI Ninja 400, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja 250, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 250, KAWASAKI Ninja 400, KAWASAKI Z400, KAWASAKI Z250
My knees feel better.
I switched to a high seat because the knee bend is tight in a normal seat and my knees hurt when I ride for a long time. I am 170cm tall and wearing riding shoes, and with Normal seat it was sticky, but with High seat, it was just a little more comfortable. When installing the seat, compared to the Normal seat, the front of the seat can be snugly inserted into the body of the vehicle and the seat can be snugly installed. The handlebar seems to be a little lower, but I am glad I bought it because the knee bend is more comfortable for me. View detail
Almost pontooned ??
Image didn't change as much as I thought it would. w
The seating comfort is about the same as OEMSeat!
View detail
Fits: KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator)
kawasaki VN250A seat cover
First, I purchased this for lower price than genuine. More attractive than I thoght. Very good product. Surface of seat is especilly good. No slippery and shape and fir good seat frame. View detail
![[GTR-Series]Seat Assembly](https://img.webike-cdn.net/catalogue/images/120000/21_TS.jpg)
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Stiffer than expected.
I installed it, but the left side has a large rattle and it is harder than I expected, so my buttocks hurt when I go on long tours. View detail
A Seat is a Seat, but it's a Seat
I've never changed my Seat to an OEMSeat before.
I happened to have an OEMOption Seat and changed it.
The quality is better than the price, and it looks luxurious.
Changed early and very happy.
View detail
Fits: HONDA ADV150, HONDA PCX, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA ADV160, YAMAHA NMAX, YAMAHA NMAX155
Summer, rain protection
In summer, my buttocks get steamed without it.
I wish there was one for one person because only one person rides, but it is a PCX125.
However, it is cold between the legs in winter. If you don't like it, take it off.
However, in rainy weather, there is no penetration of underpressurized water from the buttocks.
View detail
Fits: KAWASAKI KLX125, KAWASAKI D-TRACKER125, HONDA XR50Motard, HONDA XR100Motard, Others , HONDA DAX125, HONDA CL250, YAMAHA XSR125
For CL250
It was comfortable for touring in the middle of summer.
It is easy to install.
I don't need it in the winter.
Remove and wash lightly.
Storage.
View detail
PetitCustom
Installed on CL250
It's nice to look at.
I've been riding for a while.
Where there is a gap between the OEMSeat and the
Where wrinkles form.
I'm sorry
View detail
No slippage!
Wet type is not slippery anyway.
The drawback is that it is too grippy, and if you don't give it firm action, you can't shift the hips with Seat.
View detail
S1000xr
The colour of the seat match my bike colour, if the seat cover have more padding , it will go perfect. It need skill upholstery personnel to do the cover. View detail
As long as the ball of the thumb is attached, it is safe.
I was able to reach the ball of the big toe.
This alone is quite reassuring.
I'm glad I put it on.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg
It was even better than I imagined.
I initially purchased it for its design and price.
Other companies offer Tuck Roll Seats for the ZrX1200 DAEG, but this product was by far the cheapest and the quality was comparable.
Only Mounting Hardware can be replaced with OEM to eliminate the gap problem.
When it arrives, the Seat is straight and requires a lot of force to install, but after a while of putting it on, it will bend to fit the car body.
The Seat height is slightly lower and the cushioning is also lower, but the width is a bit wider, which in my case has significantly reduced buttock pain.
(I was pleasantly surprised because I thought it was inevitable that I would be sore because of the emphasis on design.)
I have had it on for two years and it is still working beautifully.
View detail
If you are tall, you can't go wrong buying it.
I had a pain in the hip joint area on long distance rides from the first day I rode with the Normal seat for about 1600 km.
The effect was as I expected, the pain I felt in the normal seat was eliminated, and in addition, the higher viewpoint made it more comfortable. I felt as if I was riding in a MOTARD.
View detail
It was intended to be temporary, but it will be here for a while.
As the reputation on Net said, the front upper part was slightly floaty and heckled, but after 50 km of running, it settled in. The key is to tie the laces tightly and let them acclimate with your weight. It is inexpensive, but the Image is quite different. View detail
Please use it to prevent your buttocks from slipping!
OEM skin is slippery on both G pants and leather pants, and the buttocks are immediately brought backward by unexpected bumps, etc. This product with textured skin is a recommendation. View detail