Reviews
Yoshi Yoshi
KTC Quantity of similar products:Set is for 2.5mm to 10mm, 1.5mm to 10mm Quantity:It is an overwhelming Benefit that it is a Set. Because there are opportunities to use 2mm in electric parts etc. It is easy to buy more Size, but it is Large cumbersome that it is not in the same Case. There is no special point in accuracy, texture and strength, but it is normal enough to use. View detail
I feel like I'm getting a premium feel for the price.
The tool box I'm using was a SIGNET, so I bought it as well.
It's a bit cheaper there, but it feels more luxurious than the price.
Performance is fine.
View detail
As an additional tool.
I didn't have a 27mm in the SIGNET Tools Set, so I bought an additional one.
Mainly used to remove the rear axle.
It is very well made and can be used properly without rattling.
View detail
Finishing Beauty
Cheap Quantity:One step forward from the Set tool, so I bought a Single Item to replace the pieces that have deteriorated. I added it.
This is a well-known manufacturer's product, so the work is not rattling and the work is light. It was. I don't know about the durability, but it's good enough for Sunday mechanic.
View detail
Finishing Beauty
Cheap Quantity:One step forward from the Set tool, so I bought a Single Item to replace the pieces that have deteriorated. I added it.
This is a well-known manufacturer's product, so the work is not rattling and the work is light. It was. I don't know about the durability, but it's good enough for Sunday mechanic.
View detail
Bit side Ratchet is now hard.
I thought that the tools must be used for a long period of time, so I used them for a certain period of time before making Impression. I did.
The first was the Tools Set, which was introduced onboard.
It's easy to use and can be used frequently, so it joins the toolbox.
However, the Ratchet on the Bit side begins to move reluctantly, and is used with frequent refueling. The side is perfectly normal.
Because SIGNET's Bit ratchet, which was introduced at the same time, works better at all, it is 15 degrees The tool is now limited to use only at the Offset location.
View detail
Clearance is Small and easy to use.
The SIGNET is considered reliable.
Tank and hose removal and on-board carburetor maintenance Best for Setting.
I have to use the tool for a while to get an impression of the quality of the tool, so I wrote a feeling of use. It was.
Japan's standard Screw, especially since I was impressed by the goodness of the number 2 Plus Matching, I'm a prisoner of the It is now.
It's a used car, but it's a pretty sticky one that the previous Owner was about to lick the Screw a bit. This product has a plus screw, and the SIGNET bit is added to the bad fit. All is now resolved at
Compact, Case is solid, and the Ratchet area doesn't move too badly. So even small tasks are good in the palm of your hand.
The bit is inserted in the handle, and it can serve as a driver, and it is a favorite of the tool to carry around. It is now.
When the Bit cracks, it seems to be a good tool, it cracks and the broken pieces bite into the Screw. I've never been in a situation where I couldn't get it. I use GunGun because it's rather easy to get it.
View detail
Great for screw lickers!
I'm not good at maintenance and I'm not good at loosening screws, so I often lick the head of the Plus screw This Impact Driver is very useful for this kind of situation It applies force and loosens the screws If you are suspicious about a screw, you can hit it with this from the beginning and you can unscrew it without licking the Plus! ! View detail
Deploy Compressor in Garage
Due to the placement of the Compressor under the floor, an extension Hose was needed, and this product was Purchase I'm glad I was able to extend it well View detail
Essential for air tools
When you install the Air Compressor in Garage, you'll need it to connect to Reel, and you'll be able to use it to get the Air Compressor to work It is a normal Coupling with no special features There is no special feature and it is ordinary Coupling View detail
It can be used normally
When you install the Air Compressor in Garage, you'll need it to connect to Reel, and you'll be able to use it to get the Air Compressor to work It is a normal Coupling with no special features There is no special feature, and it is a normal Coupling They're giving me View detail
Longing for SIGNET
Since we've installed the Air Compressor in Garage, we needed a Hose for an extension I bought this Reel with a retractable type and the SIGNET design is cool As a one-point object of Garage, the air gun is also integrated into the SIGNET I love it! View detail
Compressor installed in Garage
The Air Compressor was introduced to Garage For the time being, because of the air I use, I decided to use the SIGNET Air gun, which I like Large It was I'm very happy that the weight is unexpected and doesn't feel cheap! View detail
I've always wanted one
I've been wanting one since I haven't had a MONKEY Wrench for a long time I don't know how to use it very well Of course it can be used as a normal wrench, but it is also useful for holding down parts and so on Yes
There were two types of LargeSmall from SIGNET, but this is the Small Smallest one It is I thought this one was probably more frequently used for Motorcycles Dial movement, no wobble in the chin part, and the quality feeling was excellent I would like to use it for a long time from now
View detail
Compact and convenient for touring
I thought it would come in handy with the Bit and Socket that I often use on my Motorcycle I bought it during the SIGNET Sale When I received it, it is in a pretty Compact Case and it is easy to carry in the Waist Bag It's going to fit The weight is known But! I didn't look at it very closely and realized when I received it that it was a 1/4Inch socket It was It also includes an Adapter for 3/8Inch socket, which is often used for You can also use the Ratchet Handlebar, but the same SIGNET offers a lightweight Compact The Ratchet Handlebar, which is a 1/4InchBoxerHandlebar, came out and I discovered that it was available and ordered it later I think this combination is the perfect companion for touring It's hard to do any real work but it will come in handy when you find yourself on the road with a loose screw Very well made Quantity:It is a set, but I feel that the Case itself might be broken by the impact That is a little bit of a drawback View detail
Trusted Brand, Good Cosmetology
No matter how careful I thought I was, I still licked the Screw's head a few times I'll have to have an Impact Driver for this one! When I was looking for it, SIGNET was on sale! I rely on SIGNET for most of my tools, so I have great faith in them They are very easy to use, sturdy and accurate I ordered the Chance and it arrived immediately, I couldn't miss it
The most recent Screwle lick incident has already been resolved, so we haven't used the Body yet, but The Bit had a 5/16in. thick one Even if you beat it considerably, it seems to be Large sturdy (Screw is broken?) You can also use ordinary Small bits with the 1/2-inchesAdapter You can also use ordinary Small Dice Bits with the 1/2-inchesAdapter
The Body and Bit come in a Compact and durable SteelCase, and the toolbox It fits nicely in the drawer Now that's a Large width improvement for peace of mind when you mess up at work!
View detail
I'm afraid it will break.
I bought a proper Brand product because I crush Hexagonal Wrench a lot, so I bought a proper Brand product.
As far as I'm concerned, very easy to use!
On the other hand, it's too long and I cringe that it will break when I turn the hard Screw.
However, it doesn't show any signs of breaking even when it's there, so I think it's best to use it easily and aggressively.
Another thing that is easy to use is the ball joint.
The Hexagonal Wrenches I've crushed up to now do not have ball joints.
So I didn't know how good it was, but ball joint, it's great.
You can't use it to loosen or tighten it, of course, but this ball joint is nice and loose when you loosen it and then pull out the Screw, but it turns nicely without licking it.
Hold firmly when removing and tightening.
When you pull it out, use the ball joint and turn it gently and without force.
This Combination was the best.
The complaint, or rather, the failure to do so, is that this product is It was an Inch. That's the point.
It's in the name of the product.
"Centimeters. I want this product in
View detail
Quantity that doubles as a vehicle:Set as
Because the hand tool was arranged with 3/8Socket, it is 1/4 series for the detailed work Quantity, which can handle sockets and serve as a vehicle:Purchased as a set
There is one for Inch, which is unrelated to domestic car users (And 13mm more!) It's a waste of time to have it on, but it's generally a practical size to have
It is a slightly chunky rotary fee ring, but GEAR has 60 teeth, which are relatively small and 15 degrees The combination of the Offset and Head's thinness makes it quite easy to use You can use it in places where the general gear wrench does not fit
The hand-cranked dial on the back allows you to quickly tighten the Ratchet when it's not working, improving work efficiency It goes up
If the head is small, you can't change the Drive direction, so you can't turn the head over There are also things that are assumed to be, but this one is a switchover Lever is Small, but it is properly It's easy to switch between them, and it's ready to be tightened in the event of an emergency
When using it as a vehicle, Bit can be stored in a separately prepared Holder:Set, the set, the military gloves + Dustcloth to not damage the wrenches, the Socket and other I wrapped it to prevent additional tools from coming into contact with it and used a hundred-word stationery case
Even during normal maintenance, there are some tasks that cannot be done without it
In the case of my Motorcycle, the Exhaust System and Caliper The Clearance is too narrow to fit a normal tool (And a Stubby Screwdriver!) I can't turn the Minus on the Pad pin cover This Quantity:The Bit of Set allows you to remove it to SPIDI, which is useful
Anyway, it gets into the details and works well, and for tasks that don't require LargeTorque Quite useful.1/Quantity:4 I recommend this as a starting point for the set, especially if you want to have it for your vehicle as well
View detail
Bottled Beer + FashionBottle Opener = Instagrammable
Bottled Beer + FashionBottle Opener = Instagrammable
For those who love to drink, it's also a Recommendation and 10mmGlasses CombinationWrench type Bottle Opener
Good points? Good point?
I don't have to explain it anymore It's simply cool and insta-worthy
CombinationWrench Bottle Opener for your favorite bottled beer It's super fashionable to open it, and there's nothing better than sitting in the garage watching your car and drinking a beer Yes
This is a genuine tool made by the company, with a blue surface finish and a plating coating It's a real Coating that has been adopted by There's a sense of jokeGoods that the Manufacturer has really worked on The finish is very ticklish for Gadget lovers I love these products Large
Good point? Tool Manufacturer, it's easy to use
As expected from a tool manufacturer, the Bottle Opener has a long handle and is easy to work with The part also captures the plug tightly, so it's usually easy to use, even though it's a Fangッズ (Not, the Bottle Opener) part does a good job
Moreover, the other side of the CombinationWrench is a normal 10mmWrench You can use it It's also circular in shape because it's called Glasses, so you can use it as a ladle or flyback hook Can be hung and stored This CombinationWrench type Bottle next to the ladle/flyback The sight of Opener is a bit of a ShoeLu
View detail
The quality of maintenance is improved just by having 1 pc
I didn't have my own torque wrench until now, so I had to borrow or pre-marker I used to tighten the bolts by marking them with a "mark" and so on Tire and Brake detachment are now done so that you can manage the torque at any time I bought it to
Torque wrenches range from a variety of tool manufacturers to a variety of torque Wrench is out, but for now 10-100NM I thought that I could cover a certain amount of torque management if this product was available Tools Set was prepared with SIGNET, and Brand which seems to be comparatively reliable The fact that it was much cheaper than other companies was also a deciding factor
A checklist of tolerances made by the Manufacturer is included with the product, and the product description It is a torque value within dirt & plusmn; 3% If it is this high accuracy, the cost performance is good enough
The item unlocks Blue at the base of the Grip and makes the Grip any Torque Just turn it like that There is a window at the top of the lock that shows the torque value, so it's easy to set up
The lower limit is measured from 10NM, but to be honest, you can set a more detailed torque value up to 20NM The torque wrenches that can do this seem to be more reliable Especially for Engine, which is a place where detailed torque management is required, not so much for I do not recommend it When tightening Caliper bolts and Axle nuts, which require more torque than this, we recommend This one pc seems to work fine If it is used in combination with a more detailed torque wrench, depending on the use, good maintenance will also progress I think
However, it is not easy to fit in the toolbox, because the Grip part is thick I keep it in the exclusive Case separately But for those who do maintenance on the road, such as Circuit, it's not a problem You may find it difficult to carry around
View detail