Reviews
Purchased because I want Hazard
MSX125 (MLHJC92) The product has been installed in a
Holes can be machined and installed without problems using the Instruction Manual pattern.
Wiring length is fine, but the number of pins in the ConnectorCase is different by one. (It is like the difference between ThailandSpec. and Japanese specification.)
The 9-pin ConnectorCase had to be changed to a 6-pin type, but since the position of the pins is the same, once the pins are removed and inserted in the same position in Minus, the case could be used without any problem at all.
Blinker's Touch is different from OEM and this one has more Snap and feel.
View detail
Connector needs to be replaced
Purchased due to the change of gas pedal holder, the normal switch box changes the position of the lever.
It's just the right thickness, isn't it?
But if you want to put it on CB250R, you need to change the connector.
Wiring purchased and installed a set of connectors that fit the brake, kill and starter CB250R.
No problems with functionality.
View detail
Fits: HONDA LEAD125, HONDA LEAD110, HONDA LEAD110 EX, HONDA BENLY50110, HONDA BENLY50110 PRO, HONDA BENLY50 PRO, HONDA BENLY50
Okay!
It works well even for my 110kg fat self! View detail
Outstanding cuteness
It was one of the parts that I wanted to put on my DAX when I bought it. ?? It is just so cute ^_^ In addition, it improves the operation of the rear brake and kills two birds with one stone. View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI ST250, SUZUKI katana, SUZUKI GSX-R1000
GSX-S125 2023 has differences such as Wiring allocation
[How is it used?
Installed on a DL32D GSX-S 125 2023, used to take out ACC power from a DAYTONAD-UNIT WR. (I plan on wiring the D-UNIT WR with Fog and Others additional power system)
Was the one you received as per Image?
No problem.
Was the installation difficult?
When installed on a 2023 model (DL32D), the ACC (+ wire for Attachment) and GND (Grounding Wire) of this product are reversed. In my case, I connected the ACCPower Cord of D-UNIT WR to the GND wire.
Also, in the 2022 and earlier models, a blind lid was attached to the connector on the body side of the GSX-S 125, and there was no connection beyond that point, but as shown in the photo (…) in the 2023 model, another connector was connected beyond the connector on the body side, and the wiring seemed to extend beyond that point. As you can see in the photo (…), in the 2023 MODEL, another Connector is connected to the end of the Connector on the Body side, and Wiring seems to be extended to the end of the Connector.
Therefore, we disconnected the OEM's Connector and inserted our product between them.
How was your experience with it?
The objective of getting ACC power was achieved without any problem.
[Included Parts:were they on?
users' manual
[Was there anything that disappointed you?
Not particularly
Some may consider this product to be price sensitive, but I think it is a good choice because it can be quickly returned to NORMAL when sold.
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA Ape 50, HONDA Zoomer, HONDA Zoomer, HONDA solo, HONDA byte, HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY, HONDA DREAM50, HONDA JOKER90, HONDA ZOOK, HONDA JOKER Helmet, HONDA GORILLA, HONDA GORILLA, HONDA APE 100 TypeD, HONDA APE TypeD
APE 100
[How is it used?
Was the one you received as per Image? Yes
Was the installation difficult? No
How was your experience with it? Sounds good
[Included Parts:were they on? Stop lamp (Red)
[Was there anything that disappointed you? I wanted Gasket to be included.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Body color and Match
The CylinderTank cap and the body color match each other very well. View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
I think it would have been better if it were a little thicker.
The fabric is too thin. The texture would be better if it were thicker. View detail
They sure do increase the appeal when fitted to a set of red forks on the Monkey 125
About quality and texture - The front fork top bolt set from Kitaco is made from billet aluminum with detailed machining and a red anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - This top bolt set serve no purpose other then to increase the appeal on the Monkey 125 and they sure do achieve that when fitted to a set of red forks. Products to buy together - A key product to purchase when working on the front forks would be a set heavier set of springs as the original ones need upgrading for just about everyone that ride a Monkey 125. Difficulty of installation - The installation of the front fork top bolt set is an advanced task that took 1 hour complete due to the unloading of the front forks and loosen of numerous fasteners allowing for access. Mechanical aptitude and the use of basic hand tools is what is required to secure top bolt set to the front fork tubes. Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the front fork top bolt set is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the front fork top bolt set, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
I'm writing well.
It's been a while since I bought it, and I thought it was necessary to change it at first, but the more I use it, the more satisfied I am with the dress-up parts. The regular genuine lever was really uncomfortable. It's far from my hand and the lever is thin. It was hard because I kept turning off the bike with the genuine lever, but it's so nice that it's almost gone after changing it. I highly recommend it. View detail
I think I bought it well
I bought a Monkey 125 and enjoyed riding it, but the muffler manifold always felt empty. I looked it up and found an item called an engine underguard. I bought it because I thought it would fit well with the Monkey 125 I'm planning. I think it's good to get both dress-up and protection effects.. View detail
![[K TOUR] USB Power Kit](https://img.webike-cdn.net/catalogue/images/114309/80-757-13200_1_TS.jpg)
Easy to secure power supply
It is an excellent and easy way to secure power. View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100 TypeD
Acceleration Up
15T→14T for acceleration up.
I thought I would lose fuel economy, but it ended up being better because it was easier to get on Speed!
View detail
Fits: SUZUKI GSX-R1000R, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI katana, SUZUKI GSX1300R HAYABUSA
Used to replace Exhaust System
[How is it used?
I bought it along with replacing the Exhaust System on my Motorcycle.
I just took delivery of my car and thought I should be able to reuse the Gasket, but this product is so inexpensive that replacing it with a new one is not a Large expense, and I can drive the car with peace of mind from now on.
When the OEM exhaust pipe is removed, the old Gasket inside is taken out, and it is in a surprisingly reusable condition.
Was the one you received as per Image?
As per Image
If you go to 2 Rinkan, Knapps, etc., this Gasket from KITACO is so well sold that you can definitely find it in line.
It definitely looks like something I've seen somewhere else, and I'm not sure if it's an exaggeration to say it's the only option lol.
The Gasket itself is the same as the OEM color, and the size is also Exactly!
Was the installation difficult?
It is not difficult to just put in the Gasket, but to put it in, it may take some time and effort, because in the case of GSX1300RA HAYABUSA, the Radiator and Oil cooler must be shifted in order for the exhaust pipe to drop perfectly.
If the exhaust pipe is removed, this Gasket can be easily inserted.
How was your experience with it?
The Size and color are exactly the same as OEM, so as you would expect from KITACO, a reliable company.
Insert the Gasket, attach the Exhaust pipe and tighten with Bolt.
When tightened, the Gasket is pushed in firmly.
After that, hit the specified Torque and you're done.
[Included Parts:were they on?
No, sir.
Only 4 Gasket
[Was there anything that disappointed you?
I don't think so.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
GSX1300R HAYABUSA2023MODEL, Torque:23Nm*8pcs tightened on exhaust pipe
Despite the perception that the Gasket needs to be replaced along with the Exhaust pipe replacement, I think it is totally possible to remove the Exhaust pipe twice and replace the Gasket once!
View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
BALI shaving required
The Normal Throttle has a large pull allowance, so there were times when I had to re-grip it when running at full throttle, but this has not happened since switching to this product. However, this has not been the case since we switched to this product. Also, the Axel does not become too severe due to too high Solo, and the Throttle is now an easy-to-use Large Throttle.
When installing, there was a small BALI (less than 1mm) at the part that fits into the switch box, and when I turned the throttle, it jostled, so I had to shave the BALI and flatten it. It was not a large job, but it took a long time to install because I did not understand the cause at first. I recommend that you shave the BALI before installation.
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
It's confusing.
When you purchase Slip-on Silencer.
Click here to purchase Gasket." I bought it together with the Full Exhaust System because there was a LINK with it, but it was a part that I would not use unless I was replacing the Full Exhaust System.
I learned from the Instruction Manual for the Exhaust System I received that a joint gasket is required for the Slip-on Silencer for the first time, so this product was a waste of time.
I would like you to put up a LINK to the recommended parts to purchase for the product.
View detail
Fits: SUZUKI HI UP, SUZUKI SEPIA, SUZUKI ADDRESS V50(2Cycle), SUZUKI ADDRESS V100, SUZUKI AddressV, SUZUKI Address50
very fast pulley kit
Excellent, now the address 100 goes not 90 km/h but 110 km/h, the transmission is excellent, I recommend it to everyone, well packaged View detail
Purchased for ignition inspection
It is very good to be able to see the ignition system of BigSingle even when starting KICK when checking the ignition system alone. View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
There's no way out of air.
I did it with a good amount of detergent and plenty of Kiribuki, but I couldn't get the air bubbles out. View detail
Fits: KAWASAKI VERSYS650, KAWASAKI VERSYS1000, KAWASAKI NINJA650R, KAWASAKI NINJA650, KAWASAKI NINJA400R, KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI NINJA1000, KAWASAKI NINJA ZX-6R(636), KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI Z800, KAWASAKI Z1000, KAWASAKI Z250, KAWASAKI ER-6F, KAWASAKI ER-4N
NINJA400R
RearBlinker lens of NINJA400R was replaced.
[Color] From Clear [Color] Just by being Smoke, the Rear view was tightened up considerably.
View detail