Reviews
This thickness is good.
GlassesSpanner for Top cap was purchased at the same time, but Material:Plastic is good. No need to put Wound on delicate parts. I guess Technics, the SuspensionPro shop, has done a good job. View detail
PRO Tool.
This product is a must-have for O/H of inverted suspension. Technics' products are really safe and easy to use. View detail
Used for CYGNUS6 type
Used to replace RaceBearing on CYGNUS Type 6
It seems to be strong and will last for a long time.
View detail
Commonly usable
The price is cheap and the quality is good. No complaints. View detail
Fits: その他 , HONDA NSR250R, HONDA NSR50, HONDA NS400R, HONDA NS250R, HONDA NS250F, HONDA MVX250F, HONDA NSR250R, HONDA NSR50, HONDA NS400R, HONDA NS250R, HONDA NS250F, HONDA MVX250F
That would be handy
Used for MechanicalSeal installation on water pump.
Using an installer is more secure than tapping in a Socket.
These SSTs are commercially available and helpful for amateur maintenance.
View detail
Necessities for Inverted Front Fork
The function and texture are sufficient. I am disappointed that it cannot stand on its own. The other thing is the price. If it were a little more affordable, I would have no complaints. View detail
Fits: HONDA glom, HONDA glom, HONDA MONKEY125, HONDA DAX 125
I guess it's worth the good price.
I used to replace springs with a tool I made myself, but it was hard to use, so I bought this. View detail
Air venting is not difficult!
When air bites occur, air bubbles absorb brake pressure, which reduces brake controllability. 。 Symptoms often include Brake softens." Brake gets lighter." They say 。 If the resistance when gripping the brake lever is weak and it is gripped too deeply, or if the brake lever makes contact with the grips, air bite is likely to occur.
To avoid such air-bite troubles, the brake fluid Air bleed." It is
Brake fluid replaced the other day, and air bleed performed at that time. This can be done by one person using this tool.
In essence, it is a syringe that sucks out the old Fluid and the air (air) inside.
If you try to bleed the air without it, use the Brake lever if possible. Grip and release." The reason is that two people are needed:one to repeat the process and the other to check it on the Drain side. It's a hassle, isn't it?
good point
○ Low price
The capacity of the syringe also allows the old Fluid and air to escape properly.
○The inhalation force of the injector Piston is also strong and easy.
Oil Resistant Hose is also included.
The instruction manual is easy to understand.
A bad point
The Oil Resistant Hose is a bit thin and difficult to insert.
The tool has a very simple mechanism, but Fluid exchange was very easy.
Recommendation
Also of note.
The new brake fluid is fed into the Caliper side and the old brake fluid is pushed out. 。 After repeating this process, the Reserver tank will deplete of brake fluid and the old brake fluid will come out with air bubbles from the Bleed Screw. 。 At this time, be careful not to allow air to enter the Reserver tank when it is empty! 。 When there is only about one-third of the Brake fluid remaining in the Reserver tank, pour more.
View detail
Before you run out of Wire!
If you don't have a Nozzle made by Gold on hand, you might consider purchasing one.
It is easy to use, but for those who don't maintain it that often, it tends to be a hassle and useless.
Well... I think it would be better to have it to give a sense of maintenance, or not.
View detail
Fat Punishment
To be honest, 520Size thought it would be more useful if the Brush hairs were a bit longer.
I think the cosmetics are good, so Recommendation is Recommendation.
View detail
It's good enough unless it's really sticking or something.
This is very useful if the Torque can be removed without applying that much Torque.
It is a good choice for many sizes, so I would say that this one is all you need.
However, if it is super sticky, it is better to use a shape product that can use Impactetc. instead of this kind of Type.
If you extend it with Pipe and apply Torque, it will indeed bend.
View detail
Gets the job done!
my only critic would be that the writing for me was small and had to really focus to gauge my levels. Another one of those tools you don't really need but makes the job of adjusting fork oil levels a no brainer. Between the dirt bikes and mountain bikes this will pay for itself and allow making adjustments much easier. And, if you can let your buddies borrow it if they buy the beer, it is a win win. View detail
Stop guessing and use this tool to set your oil level.
Easy to use, clear markings on the tube. My only complaint is that the tube and hosing can separate when attempting to push fluid out of the syringe back into the fork oil container too quickly and creates a mess. A small hose clamp might solve this. Another one of those tools you don't really need but makes the job of adjusting fork oil levels a no brainer. Between the dirt bikes and mountain bikes this will pay for itself and allow making adjustments much easier. And, if you can let your buddies borrow it if they buy the beer, it is a win win. View detail
Used during centrifugal Filter removal of Grom.
Items essential to remove the centrifugal Filter of the Grom.
Without it, the Filter cannot be removed because it is co-rotating.
I am not sure if it is an individual difference or a problem in usage, but I managed to fix the GEAR and it is OK.
It will probably appear only once, but if there is to be a next time, it will probably be when the Clutch is replaced.
I wish it were a little cheaper.
As an aside, I lost the one I had purchased and went in a hurry to a Motorcycle supply store to buy another one.
Please be careful not to lose it because it is small.
View detail
Takegawa Lock Nut wrench for CT70
Package arrived quickly and safely from Webike! This tool is a must for anyone replacing the clutch on old Honda CT70s with semi automatic transmissions. This will fit 1/2 drive socket wrenches or cordless impact wrenches. Tool is very useful for my as i needed to replace my worn OEM Honda clutch with a Takegawa Clutch kit also from Webike. Thank you Webike! View detail
It's easier to work with, but...
Found from WeBig's imprint.
I wanted to see it used myself and bought it lol.
I used it right away.
Certainly, the grease leaks less than the one I used to use. However, the grease spray inlet is too small to fit the grease spray that I have, and it leaked from there.
I wonder if it would be easier to use if I could devise a little more.
View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
KITACO after all
When I first bought a cheap one for about 2000 yen, the shaft was off and the tool wouldn't fit. This one is a little more expensive, but it fits easily and I regretted that I should have bought this one from the beginning. View detail
The Wire lube injector lives up to its reputation.
[How is it used?
Used for refueling Wire
Was the one you received as per Image?
Yes
How was your experience with it?
The lubricant reached the tip of Wire better than I had imagined.
[Points to note]
Note the direction of the wire's leak-proof rubber.
How did it compare to other products?
The unit price is high! But after using it, I am convinced. I don't think I will ever use Injector again!
Other items that would be helpful
Opinions and requests to Manufacturer I would like to see the rubber parts issued as Repair Parts, as their lifespan is unknown.
View detail
It is a product that will last for a long time!
The price is a little high, but the rubber part is also sturdy and can be used for a long time in a wide range of sizes. View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
still necessary
Essential tool to remove GEAR to ask for CrankshaftOH.
It is possible to remove it with a piece of aluminum, but it is still this one.
View detail