Reviews
Good visibility with minimal distortion
Surprisingly good visibility with little distortion, but on the other hand, the reflection of one's face is strong and makes nighttime driving uneasy. The length is a little short, plus the quantity:Pair (for Left and Right) Wind cutting noise and eyes dry out at high speeds due to wind entrainment from the gaps in the View detail
Flash mirrorColor:Buy Yellow
Flash mirrorColor:I purchased Yellow, but the Mirror feeling was Zero.
If you want to hide your face, you should choose another color.
View detail
First Bubble shield
Purchase at the same time as the company's Jet helmet
This is my first Bubble shield.
This is my first time, so I don't know about other companies' products, but I think there is a little distortion.
But maybe this is how it is.
It doesn't bother me that much.
Even at night, it doesn't feel so tight.
As I mentioned in the Helmet Review, I feel a little thoughtful when I attach it to the Helmet.
View detail
It's vulnerable to scratches, but what can I do?
The OEM Clear shield was so badly scratched and visibility so poor that I went with the Blue shield while replacing it.
I waited a month and a half for a BackOrder that was ready to be out of stock because the color was lighter than what I had seen in the pictures.
During the daytime, it is very easy to see. No glare.
At night, it was darker and darker than expected.
Since it is an Anti-Fog Shield, it is susceptible to scratches, but this time, I applied glass coating to test it as well.
If this can be kept for about 6 months, the pace of Shield replacement will be extended, so I think Merit will be there.
View detail
Diversion to HJCHelmet from Y's Gear OEM source
Helmet is HJC's IS33?
One of the pins of the standard Pin Lock Shield was removed and the wind noise while riding was noisy, so I thought about buying the same Shield, but I learned from Impression that a Shield that does not support Pin Lock from Y's GearYJ17 is available, and since it is less expensive than the Pin Lock Shield, I bought this Shield. I bought this one because it is less expensive than the Shield and I don't use Pin Lock Seat.
The only difference is that it is not compatible with Pin Lock Seat, and the engraved model number is exactly the same, Exactly attached.
View detail
competition [Color] Smoke is thick.
[How is it used?
Installed on FLX.
https://www.webike.net/sd/24464809/
Was the one you received as per Image?
compared with expectations [Color] Smoke was dense.
How was your experience with it?
[Color] Smoke is so dark and Mirror processed that you can't see the face at all.
[Points to note]
At night it is really hard to see when there is little light.
On rainy nights I have to open the Shield to see anything, so I do, but my face gets soaked.
To begin with, the Helmet has Sunglasses on it. [Color] Clear is better.
But this one is still definitely cooler looking.
View detail
fashion-conscious
Unlike the NORMAL Clear shield, the appearance is completely different.
Aside from looking very cool, they also block out the sun and reduce glare.
Items very effective in many ways.
View detail
I like the Titaniumium coating!
What made you decide to buy?
I installed it on my recently purchased ARAI:RX-7X PedrosaDesign helmet. When I started riding motorcycles, most of the shield replacements were Smoke Shield replacements. As time goes by, there are more and more options to replace the shield, and the helmet is one of those items that allows you to express your individuality. In case you are wondering, I am a shy person... I always replace the shield so that people can't see my face through the shield.
How was your experience with it?
Installing the Shield is much easier on the RX-7X than on the other ARAIHelmet, the Quantum Compared to the other ARAIHelmet, the Quantum -J, the RX-7X is very easy to install. I purchased the Mirror shield in Base Color:Smoke/Mirror coatingColor:It is blue. Since it is a Titaniumium color, the appearance of the shield color will change if the viewing angle changes. If I were to use a metaphor, I would say that it looks like a Titaniumium Exhaust or Titanium Exhaust Manifold. I don't think you can see my face even from the outside. I am a shy person, so this is perfect for me.
Next is the Impression from Shield, where the Base color is [Color] This is the DARKSmoke that I installed on my SHOEI Z-7 Helmet. According to the manufacturer's website, the Titaniumium blue shield that I purchased is the best choice for me because it looks brighter than the Shield. A slightly blue tint to the vision. Less color change and easier to see." It is described as follows. I'm looking forward to seeing how the seasonal changes of spring sky, mid-summer sunshine, autumn sky, mid-winter sky, etc. will look like through the shield. Here are some images of how the mirror shield I purchased looks. The photos were taken indoors under fluorescent lighting. I took pictures of the object without the shield and through the shield. (There is a difference in the way it looks depending on the monitor environment, so please consider this as a reference.)
Before installing the shield, apply a small amount of silicone oil to the sliding part of the shield. The instruction manual says, "Do not get silicone oil on the surface of the shield. Do not get it on the shield surface! Also, the Mirror shield is a delicate piece, so be careful when handling it.
View detail
I'm too shy to go to ・・・・ (laughs)
What made you decide to buy?
SHOEI:Z-7 Marquez Design Helmet Image Chain and my shyness... I replaced the helmet with a mirror shield so that people can't see my face through the shield (lol).
How was your experience with it?
Compared to the ARAI, the SHOEI is super easy to install. I think even women can install it easily. The appearance of the bike is great, and the parenthesis is so good that I wish I could see myself riding the bike with my own eyes.
until now [Color] I've been using Smoke's Shield, and while I was able to run with it in the Tunnel, I purchased the Base Color:Dark Smoke、CoatingColor:This is Orange. My impressions of the test run... Date:January 15, 2022, 2:00 p.m. Weather:Cloudy conditions. As mentioned in another user's review, the middle of the shield seems to be darker in color.:Pair (for Left and Right) I am using the ARAI Helmet with a blue mirror shield. When I installed the ARAI mirror shield, I felt uncomfortable, but I got used to it as I used it, so I am sure I will get used to this mirror shield as well. I also found it interesting to see how the different coating colors look differently.
This time, I'm looking forward to seeing how it will look like on a cloudy midwinter afternoon... or mid-summer afternoon sunshine. I just purchased the Shield Base Color:Dark Smoke. I think it might be dangerous at night, and it might be difficult to see inside the tunnel. I would like to drive safely with this in mind.
View detail
Used with ARAIS70
I used to use another manufacturer. This product has a long shield and is very windproof. View detail
I was able to use it for AraiClassic.
I put it on my Arai Classic. I was able to install it without any problems, but the Shield is too stiff to move up and down. You may want to use silicone oil or grease to break it in before you install it. However, it may be that the accuracy of the Button part of the installation was bad by chance only for the one I bought, or it may be that it was just incompatible with my AraiClassic by chance.
I've heard that some bubble shields can distort the view, but this shield didn't bother me. I chose the Clear type because I do a lot of night riding. I think it's inexpensive, so it might be good to have several types depending on your mood and conditions.
View detail
JAM The reinforcing Suction Cup is used exclusively...
First of all, when I bought it, I did not expect the stiffness like ARAI or SHOEI products from the price.
I chose LightGradation blue for the flash mirror, but it looks more like light smoke than gradation, and moreover, it looks more like normal light smoke than blue, is this the manufacturer's standard or Naming? Certainly? But it is the original [Color] Smoke looks like it feels much darker.
There is little distortion and it is easy to see well, and there is no sense of eye fatigue.
The impression of the lack of rigidity as shown in the comments of the past evaluators is unavoidable because the thickness of the Shield itself is thin. However, there is accuracy that is not bad considering this price range, and the impression changes completely by adding the following Parts.
I installed a JAM specific reinforced Suction Cup on both ends of the Shield installation.
With this Suction Cup, the Shield itself has been given a more solid feel, and the usability has been improved. Also, it seems to have been improved to prevent sudden opening and closing on the highway by installing a locking snap.
I tried to run near the speed limit in the highway test section of the new Tomei, but I was able to use it comfortably without any particular problems or troubling scenes.
Anyway, it can be opened and closed, and when the sun is low in the morning or evening, it is possible to prevent sobriety with the eaves, and it gives off an old-fashioned atmosphere with ease. It becomes the form of Helmet that suits Machine.
I thought it would be a good idea to have one of those Helmets that have an atmosphere that allows you to run around town with ease.
It becomes the atmosphere of Helmet that suits especially W, ESTRELLA, and SR GB system Machine well.
Recently, the JAM Helmet has come in handy when I go out after changing the Shield.
View detail
Good balance of appearance and visibility
I bought the Mirror shield because I don't want to see my face in the OEM Clear shield.
I chose Light smoke for the Base because I ride my motorcycle in the rain and at night.
In daylight, you can see your face through it, but I think it's just right because the visibility is Outclassing.
View detail
Mirror degree is not strong.
The Jet helmet is a classic and looks great on it.
The drawback is that Shield is fixed, so it's hard to wear.
Shield's Mirror is not very strong and you should expect it to not hide your face.
View detail
Shield collar is cool.
I bought a Ridez XX helmet. There is a transparent shield attached, so I bought an additional colored shield. The rainbow color is cool. It's cheap and the delivery is cheap. View detail
Will not fit BELL's CUSTOM500
I think the thing is good work.
But unfortunately, CUSTOM500 can not be used for 5 points.
Because it is a Helmet of a foreign thing, it is inevitable.
I was reminded that the 5-point stop Shield will likely not stick unless it is OEM.
View detail
Fits: Others GT-Air REGALIA, Others GT-Air JOURNEY, Others GT-Air, Others GT-Air WANDERER, Others NEOTEC BOREALIS, Others GT-Air INERTIA, Others NEOTEC
Mellow Smoke, but even thinner.
[How is it used?
Touring and commuting
Was the one you received as per Image?
It was the wrong color, but it was acceptable.
How was your experience with it?
I can use it at night and so far no peeling.
[Points to note]
If you rub it, Mirror will peel right off.
How did it compare to other products?
Base color was lighter than OEMMirror (Mellow Smoke)
View detail
It was more than I expected.
I was using 72jam's Flash mirrorLight smokeCompetition shield, but I decided to use Makeover to make a retractable Bubble shield.
The color of the Shield is Gold which is easy to see even at night from the animation of the homepage of 72jam.
I was worried about the rattling of the Shield and the Wind Cutting noise, but I think it is Level, which I personally do not mind. I was worried about the rattling of the shield and the wind cutting sound, but I think it is the level that I don't mind.
There is no distortion of the field of view that is common with bubble shields.
I think it's the quality of the molding and the shape.
The night vision is also easier to see than the Flash mirrorLight smoke that I used to use.
View detail
I'm generally satisfied!
The nighttime visibility is better than I imagined.
Even if you enter a tunnel, you can recognize the vehicle in front of you and oncoming vehicles.
I was surprised that it looked a little brownish, but I am satisfied with the high glare reduction effect.
I don't know yet how easy it is to scratch, but so far it's been fine.
View detail
It is the same as OEM Product
I bought the Dark smoke in Silver.
I don't know because I basically don't run at night, but I can see enough in the daytime.
View detail