Reviews
it fits so well
Delivery is fast and I am very satisfied with the product. I have ordered so many products from Webike. However, these high-quality and in good condition products are really reliable. We recommend this product to those who love and like bikes. Reliable product, fast delivery, I am very satisfied with the result. I am very satisfied. I will order again and trust. Thank you. I love you. I will order today. Delivery is fast and I am very satisfied with the product. I have ordered so many products from Webike. However, these high-quality and in good condition products are really reliable. For those of you who love and love bikes, Now I recommend this product. Reliable product, fast delivery, very satisfactory results I like it very much I will order again and trust thank you Love it I'm taking orders today View detail
Fits: HONDA Rebel1100DCT, HONDA Rebel 1100, HONDA Rebel1100DCT, HONDA Rebel 1100
Good fit, enough strength for my needs.
I installed it while supporting the car body with my body.
If you have the strength, you can install it without any problem.
After installation, the car body wakes up more than I expected, but so far I haven't had to worry about it falling over even though I live in a windy area.
As for stability on rough terrain, I have plans to go camping in February 2022, so I will test it there.
Four Hexagon bolts are used to secure the STAND installation.
It does not close completely and floats slightly. (See photo)
However, since the load is only applied from the top to the bottom, the direction in which the bolt breaks (front to back of the vehicle, quantity:Pair (for Left and Right) I think there is no need to worry about it as long as you don't apply force to it (in the direction of
View detail
Fits: HONDA Rebel1100DCT, HONDA Rebel 1100, HONDA Rebel1100DCT, HONDA Rebel 1100
Is this design large and sturdy?
I should have looked at the pictures better, but the Base and Cover are in the installed state. (tentative name) There will be a gap between the two, and the length of the Bolt engagement will be reduced.
The picture in the product description looks Exactly like the surface hit, but it is not the same as the installed condition. Scam Level.
The tension between the base and cover does not hit the surface, only the bolt tension, so it may loosen due to vibration while driving and fall off if you notice.
Why is it designed this way?
I no longer trust this company called Earls Gear.
View detail
What about on the pavement?
If the place is gravel, dirt, etc.
I think you'll find it works.
On pavement, there is no overall feeling of ground contact.
Are only some parts of the body holding it up?
It's not that unstable.
Am I worrying too much about it?
No more parking mishaps on the road.
I hope so lol
View detail
Screw lock is required.
I don't have to worry about it falling down on soft ground anymore.
However, I had a screw lock on it, but it came loose and fell off while driving.
Fortunately, I noticed it right away and was able to retrieve it, but I couldn't find a rubber sheet for adjustment, so I used a handheld one instead.
For the re-installation, I applied a lot of urethane glue and used a high strength screw lock.
View detail
Fits: HARLEY-DAVIDSON SPORTSTER, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200V, HARLEY-DAVIDSON XL1200CB, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200CA, HARLEY-DAVIDSON XL1200C(110thAnv), HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200R, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200C
When the side stand is out, it becomes a silhouette that fits the Harley-style.
No more swinging in and out of the Side Stand.
It's a little thing, but I think it's a very important thing for riding a motorcycle comfortably.
I was surprised that the style of the STAND became more wilde, but I think it will be a large charm.
Of course, installation was super easy. It was the best fit.
I think the texture is good.
The only thing is that it is a bit expensive, so I give it 4 stars.
View detail
Larger than expected
The size is larger than I expected and it is very stable. I'm glad it's not too noticeable when stored. View detail
Just the right amount of tilt.
In Japan, we have Left Side traffic, so the leaning is more large when we stop. Especially, when I stopped on the shoulder of the road while touring with a full load of luggage, I felt uneasy because it became a considerable lean. At such a time, I found this product and bought it. It is easy to install with 4 bolts.
The product is of high quality, high texture and chunky weight, and the tilt is just right, this eliminates any concerns. This product is more effective in loosening up the incline of the Motorcycle rather than increasing the footprint of the STAND. I haven't tried it on soft or sandy soil, so I don't know how effective it would be, but it would be a good idea to put some hard wood chips or large stones underneath just in case.
The price was high, but when I got the actual product, I was satisfied with the quality, and I am glad I bought it.
View detail
It's huge.
I bought it with the intention of using it on my touring destination, but I laughed when I saw the actual product.
It's too big! I can't take it with me.
The diameter is about 16?
I have no choice but to use it at home.
View detail
Fits: YAMAHA MT-09, YAMAHA Tracer9, YAMAHA Tracer9 GT, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA Tracer 9 GT, YAMAHA Tracer 9, YAMAHA XSR900
Safe parking in gravel parking lots, etc.
If it is STAND of NORMAL, there is a fear that it will fall down in the parking lot of gravel. Because it is troublesome to look for a stone every time, I bought this. Because there was an instruction of the screw lock agent (medium strength) in Instruction Manual, I applied it and tightened it.
After the Stand End is installed, the car body will be raised lightly, but it is almost the level that is not bothered. I used to have HEPCO Stand End on another car, but it didn't fall down.
It's quite safe and I recommend it.
The tools you need are 3mm hex Wrench and Screw locker.
If you are used to raising the vehicle, you can do it from the left side by yourself, but if you are not sure, you can do it with two people or with maintenanceSTAND.
It is necessary to buy a special one for 21MODEL.
View detail
Fits: HARLEY-DAVIDSON SPORTSTER, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200V, HARLEY-DAVIDSON XL1200CB, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200CA, HARLEY-DAVIDSON XL1200C(110thAnv), HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200R, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200C
Hmmm...
It looks good, but it feels strangely light and scantily clad.
I bought it on Sale, so it's okay, but if it was regular price, I think it would be expensive.
View detail
Fits: HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports
I feel so much better.
Before I put it on, it was very heavy to cause, but after I put it on, it became very easy.
I wish I had put it on sooner.
View detail
Pricey but good stuff.
The F900XR is a Germany car and the lane is reversed, so the inclination of the road is also opposite to Japan. Therefore, the inclination is hard, and the fear comes out when parking. If I get used to it, it will be good, but I buy it for the sense of security in the case of emergency and usually. I used the one made in China which is not so thick in the first stage, but the effect is different by far. Because the inclination at the time of parking changes to the same Level as a domestic car, a sense of security is obtained. View detail
It is safe.
[How is it used?
I installed it the other day.
Was the one you received as per Image?
Yes. Just like the picture.
Was the installation difficult?
It is easy to raise it with Rear stand and fix it with Hexagonal Wrench in accordance with STAND.
How was your experience with it?
It increases stability and is easy to stop even on gravel.
[Included Parts:were they on?
Body、Screw、Instruction Manual
[Was there anything that disappointed you?
Just a little hit will scratch it and make it a little more noticeable.
View detail
It was Just fit!
I installed it on my TENERE700.
Installation was easy, and it looks like I won't need to use the Rubber that comes with the Wobble if you have the Just fit. I used screw locker on the three bolts just to be safe. 300km on the bike and no loosening.
Externally, it matches the TENERE700's Aluminum Forged Side Stand in terms of texture. Functionally, the ground area is (Looks.) The price is cheaper than other companies and I can recommend it to people who go off-road with TENERE700. It's also cheaper than the competition, and I can recommend it to anyone going off-road with a Tenere 700!
View detail
![[YAMASHIRO] YK-017 Side Stand Pad](https://img.webike-cdn.net/catalogue/images/55528/YK-017_BK_TS.jpg)
for use at home
Purchased to park for Vehicle on the road.
I've only used it a few times, but so far no durability issues.
View detail
Sweet addition to my bike
Fitment is 100%! Superb customer service! Delivery took less than a week. Definitely buying from webike again. Prices are reasonable. View detail
Easy to install, just fit.
The shape is just fit, so it is easy to install, and it matches well with the TENERE700 Aluminum Forged Side Stand in appearance. I was able to install it without the included Rubber mat without any hesitation. In order to prevent loosening, I applied screw lock agent to the 3 bolts and tightened them. Because the ground contact area becomes about double, the sense of security is different when stopping on uneven ground. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z650, KAWASAKI Z800, KAWASAKI Z1000
It's not the same.
It's pricey, but it doesn't fit the size and it's rickety.
I can't even squeeze it with a hex screw. Can I sell this...
This is the worst product and you should not buy it.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Z650, KAWASAKI Z1000, KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Z650, KAWASAKI Z1000
They don't match.
I installed it on my 2021 Z900RS, and even though I tightened the screw as hard as I could, it still rattled and was obviously not a compatible product. The price is too high for a manufacturer that only deals with cheap Chinese products. The size of the hexagon is also mysterious and inconvenient. It is better not to buy it. View detail