Reviews
Fits: KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2SX SE
I would like to see an effort to eliminate Option products.
Fender Eliminator had been using Active, so I bought it at Timing, where I had just finished inspecting the car.
It is unfortunate that the price became expensive because we purchased two Option Blinker and Bracket at the same time because we did not want Pannier to be out of the market. I think the product is insufficiently considered in this respect.
Also, although the simultaneous tightening of the License Plate Bracket and the License Plate can reduce the number of parts, it is disappointing that there is no texture.
The installation was the worst because I have a Bracket for GIVITop case, but I think it would be easy to install under normal circumstances.
If you do not use Pannier, which is also an Option consideration, I can recommend it.
View detail
feeling refreshed
[How is it used?
I used this to remove the characteristic Fender of Center Up
Was the one you received as per Image?
It turned out exactly as shown in the picture.
The cleaner look makes it more photogenic and easier to photograph.
Was the installation difficult?
Compared to other car models, there were more parts to be removed, so I felt it was more labor intensive.
I thought it would not be too difficult because I had some idea of what I was going to do beforehand, such as with the video Site, and did the work.
How was your experience with it?
Since the Fender will be gone, there may be more winding of the Rear than before.
(I haven't experienced it yet)
[Included Parts:were they on?
There was a set of parts to be installed on the car and a simple instruction manual for installation.
[Was there anything that disappointed you?
From the back, it looks slim and good, but from the side, it looks a bit more.
Maybe it was the Center UpLayout part that made me feel that way, unlike the current style of SS.
Instruction Manual is included in the package, but I think it would be easier for first-time users to imagine the work and proceed after watching a video or something.
View detail
fenderless kit
About quality and texture be of average quality About the feeling of use I had to combine the other kits It is too short to install in ape100 Products to buy together 0900-529-10301 Blinker could be installed using Universal Bracket Difficulty of installation It's not a perfect product. It's a product that needs to be customized Cost performance and comparison with other products My bicycle dirt tray is made of Takegawa, but I bought it because I thought there would be no big difference between the two products because the price of Takegawa and fenderless products was double, but there were many problems. About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I think this product is suitable for Ape50 It's not a bad product for Ape100, but the blinker position is moved too far back I couldn't install this fenderless product and move the bike behind the bike View detail
cheap
Fender Eliminator from ksStyle was not available, so we substituted it here
The number angle is a little loose, so if you want to raise the number angle precisely, use another manufacturer's number angle.
View detail
Even if it was attached simply and you carry out what time contribution, tell the reason for a send-off!
Even if it was attached simply and you carry out what time contribution, tell the reason for a send-off! View detail
Fits: KAWASAKI NINJA250, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI NINJA400
Refreshing
The quality is good and installation is easy.
If you are going to make it a Blinker reply in the future, the look of this Kit with the Blinker Bracket still in place may not look so good.
View detail
Fender Eliminator
I used it on my GROM. The number was not as high as I thought it would be, but it's not a problem at all. View detail
The simplest construction among the things that can be attached to the GSX-R.
Product Name
ACTIVE Active Fender Eliminator Kit
Item Number
1155040
Vehicles
GSX-R1000R 2017
Number of man-hours
About 30 minutes
Why did you choose this product?
I bought it because I thought the OEM Fender was too large and I thought the whole body would be cooler with a lesser design.
Impressions after using it
The product is as expected, both good and bad.
Product Contents is a simple product, so there was no difficulty about installation.
If I had to say, it's not a messy design, so it's easy to blend in with the vehicle.
For myself, I prefer a matte surface finish.
Also, this is the fate of the Fender Eliminator.
When this product is installed, the back gets dirty well because it bounces up badly in the rain.
▼ Attention
It takes the exterior around Seat to install, so if you are not confident about the work, it is better to ask PRO.
View detail
Installation is a pain and Blinker Wiring is tight.
It's a little cheap.
The gap between the Blinker's Wiring is narrow and oppressive.
The stop-lamp wobbled a bit and the fit was not so good.
I guess it's an old product.
View detail
not very good
The long tail is a curious exchange.
The installation itself was painless, but it would have been better if there was a Seal to hide the OEM holes.
I'm particularly concerned about the square hole in the Center, so I'm going to buy a Rubber plate and sandwich it in.
View detail
A little more
The installation instruction manual is written in both APE 50 and 100 It's hard to understand
Also, it would be helpful if you could describe the tail lamp OEM removal and installation in more detail
I would like the Base plate to be a little longer when installed I am worried about the gap
View detail
Fits: KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2SX SE
The Pannier case will be scratched up
I don't think of attaching the Pannier case to this product at all, because the Pannier case and Blinker hits the gut! So the Pannier case is now covered in scratches
I took a 1.5 cm collar and shifted it backwards to make a hole in the License Plate Light with Drill and put Number on it
I managed to install the License Plate Light with a bracket, but I was able to do it hELLIP;
It took a lot of work to get it into shape here
Active, why didn't you consider the Pannier case ( ; ;)
View detail
so-so
With the help of a friend, I managed to install it, but it was difficult to do so on my own
Also, I wish I had put a Reflector on it, because Sticker doesn't go in
Because there is no Plate frame, the Plate bends quickly
View detail
It does not match the LED Blinker of MT-09 OEMOption
Looks like OEMOption's LED Blinker and the root 1. About 5 cm hidden by Number,
The LED part is also hidden.
Although there is no problem in practical use, the automobile inspection will not pass.
Whether you extend the length with Spacer,
Return to STD Blinker,
Do you want to find another Blinker ...
View detail
I think that it is like this
We installed in L7GSX-R. Originally the shape of the installation site changed a bit, so Manufacturer side saw a sense of hardship. I think that it would have been better if the shape was a little more narrowed the width of Blinker. But compared with NORMAL, I think that it will become SMART and fit in Compact. View detail
It is quite good feeling
I am solidly synthesized..
The making of each Parts is also beautifully finished..
It is good to have Coupler and fine BlinkerWasherParts.
License Plate Light's LED is a bit disappointing.
Regrettably, the fabrication of the Bracket division is regrettable.
I feel it's expensive a little !?.
View detail
It looks nice!
I got lost a couple of products but decided here!
Installation can be done according to the instruction manual!
This item used OEM License Lamp Type and LED License Plate Lamp Used Type There was a Type, I made it for the LED, but I was in a state that LEDWiring's contact is bad or not arrived.
View detail
Installation is Large strange.
The tail which extended with the baby is clear. Tail became a feeling that it jumped up and Parenthesis is good.
However, installation is as it is Large strange.
Since I had a Standard working time of 1 hour in Package, I started working from the evening, but I got a little time to remove BlinkerWiring and gave up due to expiration of sunset time. I brought it to the Motorcycle shop after all the following day.
I have been working there for about 2 hours and managed to finish it. There is also a description in the attached Instruction Manual, but there is a good place to work with two people. The attachment of the Mud Guard that blocks the hole of Wiring is also fine work, it can not be a handy Custom just to remove it with a pong.
When bringing it to a shop, it may be slightly bad if you include that wage.
View detail
A complete set and useful
Installation etc etc. I was able to install it satisfactorily well.
However, it is still relatively expensive compared to goods, I think that I could make it cheaply, as it is, at Homsen Bracket if I thought well enough.
It is pretty because the Screws, the License Plate Light, and the Coupler are complete and the angular position and the hole position are in place even if you do not think about anything.
View detail
I can do it with Bolt-on
I can do it with Bolt - on, but I think that it will be a hard time to install it by unfamiliar people.
The Instruction Manual was hard to understand, it took about an hour.
(It took 30 minutes by the thing of another company until now). )
Making was Large strange, I liked it very much after installation.
I wish I could make the Instruction Manual easier to understand a little, I wish I could have explained the explanation of Wiring something.
View detail