Reviews
Lightweight Compact
I had been using an ordinary ram-mounted Arm, but when I transplanted it to the FairingBracket from its previous mount on the Handlebar, the length of the Arm became an obstacle to handling, and because it was heavy, the angle of the Arm sometimes changed due to vibration or shock. The length of the Arm was an obstacle to its handling.
That is why we changed to a short arm. The short arm is lighter than the short arm, and it also reduces the load on the base.
View detail
Robust retention and mysterious unity
[How is it used?
Quantity of about 8 years and 80,000 km (YZF-R25, 10,000 km in half a year, the rest YZF-R6):2pc. Use Set
Installation:All of them are installed by building a base on the handlebar, R25 with Nisshin Mirror Holder, R6 with CF POSH Mirror Holder (https://www.webike.net/sd/1125900/) and YAMAHAOEM Parts (https://www.webike.net/sd/1125900/) with M10Ball (https://www.webike.net/sd/1125900/) and Short arm (https://www.webike.net/sd/1125900/). R6 is equipped with CF POSH Mirror Holder (https://www.webike.net/sd/21313052/) and YAMAHAOEM Parts (https://www.webike.net/sd/25729937/) with M10Ball (https://www.webike.net/sd/24021956/) and short arm (https://www.webike.net/sd/21313052/). Short arm ()
Equipment used
Xperia 5 I don't even remember because I have no records before and I wasn't really interested in smartphones.
1. Xperia 5 (docomo) approx. 2 years
2. Galaxy S21 (docomo) about 1 year
2-1.DriveMan BS-8 (https://www.webike.net/sd/23219567/) parallel operation
3. Xperia 5 iii (simFree) about 1 year
4. Pixel 7 Pro (simFree) approx. 1 year
Was the one you received as per Image?
Simple look and somewhat rough information as per Image
Was the installation difficult?
Once the ball of the base is fixed, Arm components can be tightened and loosened without the need for tools, making them easy to use.
However, the Handlebar is used with the smartphone attached to the Quantity:Pair (for Left and Right) It is necessary to check the interference with the Screen, etc. by cutting the screen in half, so it is necessary to check after attaching it.
How was your experience with it?
Even after fixing, some Quantity:Pair (for Left and Right) There is some play in the rotation of the wheel, but it did not rotate while running and did not cause any problems in use.
Although it is not known whether the Smartphone and Camera we used have optical image stabilization, we have never experienced any problems with the Camera.
I have never had a phone fall off without the rubber claws, though. It is just meant to be a precaution.
The rubber part alone can be replaced, and the color can be selected from three colors (https://www.webike.net/sd/24186773/), so the expense is modest when deterioration is somehow a concern. Adhesive also included.
Since it is clamped by four claws, it is necessary to pay attention to the position of the Button (dedicated to Camera of Xperia or Action of iPhone 15Pro) if it is located on the edge of the Smartphone. (I mean, even the Pixel7Pro with two buttons on the Right Side sometimes pressed them.
The size of the gold part of the OEM mounting base of the Driveman BS-8 (also 10) and the gold part of the center seal of this product when the seal is peeled off are brilliantly the same, and when the gold part is disassembled with appropriate double-sided tape and transplanted and attached, it becomes a much sturdier and more robust mounting base than the BS-8's optional Handlebar Mounting. The Mount base is much sturdier and more robust than the BS-8's optional Handlebar Mounting. (It is also possible to clamp it with a nail to further increase stability.
I think I gave up on Seal because its texture is similar to that of YAMAHA's tuning fork Sticker, and it looks similar but slightly different in Largeness.
[Included Parts:were they on?
No Instruction Manual or any other instruction manuals are included in the product images.
[Was there anything that disappointed you?
Nothing special. However, I would have been sad and run to SYGN HOUSE if I didn't know that it was made in the United States and used by the military, but that it was not so particular about the appearance of the product.
Originally, we had used a holder composed only of resin from Miknowla, but the time and effort required to attach and detach the Smartphone was far less. Also, the claim that it is also used by the military made me feel more secure on my motorbike, which has a lot of vibration.
I have never encountered any image stabilization problems, and would have continued to use this product if there were not more Buttons on the Smartphone side.
View detail
If there is no reason, this" is" good.
[How is it used?
About 7 years and 70,000 km
XGrip for Smartphone to attach Smartphone and DVR
Mounting points are around the handlebar
Was the one you received as per Image?
Simple package, somewhat rough product as per Image. I would like to say that it is heavy, but it is heavier than I had imagined from the fact that I had heard that it was made of aluminum and from the appearance of its small size.
Was the installation difficult?
The OEM Knob is simply loosened, inserted, and tightened.
If theft is a concern, SecurityKnob is available, but it is a bit bulky.
It is possible to use an Inch size nut to secure the Merit, which can be loosened and angled without the need for tools (use the nut for installation. (Use the Nut for installation, but do not over-tighten it.)
How was your experience with it?
Compared to the standard arm (https://www.webike.net/sd/21313050/) and long arm (https://www.webike.net/sd/21313048/), there is no Spring inside, but it has not come loose or come off.
Since it is the shortest Arm, I thought it would be the least likely to cause a sense of mess when attached around the Handlebar. The support length is also shorter, so it is somewhat safer.
The short length of the cable makes it less flexible. However, the position of Charger was originally taken into consideration, so there is no particular impact.
The lightest Arm components except for those with different materials
[Included Parts:were they on?
No particular product only.
[Was there anything that disappointed you?
Nothing special. If I had to say, it would be nice if Bolt wasmm Size, but there is no problem if you don't change it from the original parts.
Quantity:If you want to buy this product, you need to purchase it from RoseRose because the Set comes with a standard arm, but unless you need a standard or long arm for height or position reasons, I feel that this product is the one to choose if you are looking for lightness.
View detail
I didn't use it right.
It was attached to a steel Fuel Tank and used as a base for a Phone Holder, but when running on a day with a high of 40-Degrees, it tore from the border of the inner Gold genus. It seems that the heat softened it and it could no longer support the weight.
"Must be used indoors/inside a vehicle." I'm not complaining because I used it on an unusually hot day when it says, "I'm not complaining, but just FYI.
View detail
For Fat bar
[How is it used?
I purchased this product to install Gopuro on my Fat bar.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Just sandwich it between Screw and Nut, but in the case of Fat bar, since it is 28.6Size, sandwich the collar that comes with it.
Both Screw and Nut are small, so be careful not to lose them.
How was your experience with it?
It is just the right Size so it fits securely.
[Included Parts:were they on?
Size adjustment collar is attached.
[Was there anything that disappointed you?
I think it would be easier to use if it were more Compact, but it is good because it is durable.
View detail
It's easy to use, but it's a Large size.
[How is it used?
I purchased this to mount my Gopro.
Was the one you received as per Image?
It is standard, but quite longer than the Image.
And it is quite heavy.
Was the installation difficult?
It is easy to use because you just turn the handle to loosen it and insert the ball into the loosened part. However, when I loosened the Dial too much and it came off, parts were scattered.
Please be careful not to loosen it too much.
How was your experience with it?
It is long but easy to use because of its flexibility.
[Included Parts:were they on?
Instruction Manual。
[Was there anything that disappointed you?
I wish it was a little lighter and Compact. It's a bit tough on the half side, so which would you take?
View detail
Usability is good
[How is it used?
RamMount for GoproCamera shooting on Fat bar's Road motorcycle.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It is attached in the same way as a normal go-promount, so it is simply attached with screws.
How was your experience with it?
With other GoproMounts, the height was not high enough for the handlebar, and it was hard to see the front of the camera.
The RamMount has a standard setting and was easy to install without having to think about how to install it.
[Included Parts:were they on?
As shown in the image.
[Was there anything that disappointed you?
Neck is a bit pricey, but it is easy to use.
View detail
Think of it as a consumable item, maybe once a year.
The Hold feeling is excellent.
I have Rubber's Strap on just in case, but it's so good that it doesn't seem to fall off without it.
This is the third one I've bought, and within a year the plastic part in the middle comes off, it gets rickety, and one of the four holds falls apart….
Spare Parts is also available, but we end up replacing it.
The fact that it is so appealing that I keep using it because I can't find any other good product!
View detail
It is sturdy. And it is flexible.
[How is it used?
I purchased this for my Lap timer installation.
Was the one you received as per Image?
This was the first time I purchased Ram Mount and it was quite robust.
How was your experience with it?
It is used in combination with Arm, but requires a fair amount of Space.
However, the ball type allows for a high degree of freedom and can be set at a certain angle, making it convenient.
The Body was made of steel or was quite heavy.
However, I have considered various types of brackets, and I think this bracket, which can be provided by ready-made products, is excellent, although a bit expensive.
Now it's like thinking about what to do about Wiring during Race.
[Points to note]
I installed it on a fat bar this time, but I couldn't get it to a good position with the M size.
View detail
Smartphone Holder Installation
I was able to easily attach my phone to this Holder without blocking the power and volume control buttons, and it holds the phone securely. The only thing that is a little disappointing is that the phone's MainCamera is located in the Center, so it blocks the MainCamera. View detail
XGrip is great, but Stem's Mount is ….
I installed it on a gsx-r125. Since the Handling Instruction Manual is all in English Version, I installed it while using GoogleLens. The Rubber of the Stem Mount turns and the Screw loosens quickly. It seems that the Stem Mount will not come off while driving.
It might be better to buy only the Stem fixing part, which belongs to the genus Gold from PLOT….
View detail
Used for Motorcycle Drink holder.
I bought this to replace the drink holder I had made for my KSR2 and to install on another motorcycle. (Inner?) I ran 60km without Sponge, but Plastic bottle did not fall off and I was able to use it safely.
I don't know if all of them are compatible with Plastic bottle.:The color of the Sponge is Blue in the Site description when I purchased it, but it is Black in the current Catalogue, so naturally I received the Black color.
View detail
RAM Mount
Ram Mount for GSX1300R HAYABUSA.
I bought it because all my friends were wearing this.
I was worried that it would fall off, but it never fell off at all, and I have never had Camera break due to vibration.
… but my friend had a broken iPhone Camera, so I'll leave that to your personal judgment.
I am using my old iPhone XS as Navigation.
View detail
RAM Mount U-shaped Clamp
For now, I am using it for both GSX1300R HAYABUSA and GSX1300R HAYABUSA.
I will buy another one for CT110 HUNTER CUB later, but I also bought it for CT110 HUNTER CUB because I was worried that I would not be able to use it without Navigation.
The angle of the clamp is not that much of a concern, but I appreciate that I can install it without worrying about the angle, and since it is easy to remove except for the clamp, there are no problems other than a little bit of hassle for now as a dual use.
Even with vibration, I still haven't broken the Camera on my iPhone XS for Navigation.
View detail
Short is the best.
I purchased the Short Type because the standard was too long and difficult to handle. I like the quality and feel of the product. View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Purchased as Base for Smartphone Holder
I purchased two of these as a base for my Smartphone Holder, Gopro, and MINI TaBrett. They are easy to install, but you will need a Hexagonal Wrench, which is not included in the package. The only drawback is that the shortest bolt is too long, and the material of the bolt is not indicated. View detail
Wireless charging allows charging in the rain
[How is it used?
If your phone supports Wireless charging, you can charge it even in the rain.
Was the one you received as per Image?
Charger section is thicker and weighs 544g (figures announced on the agency's website) and somewhat heavy.
How was your experience with it?
The battery charge catches up slowly while playing NAVITIME and music.
I also like that there is an OnOff switch to prevent overcharging.
[Points to note]
Quantity the phone:When set, it is difficult to notice that the Charging Indicator is off (not charging) because the Charging Indicator is not visible unless you look into it from the side.
The USB Connector is not waterproof but comes with a Rubber cover.
[Opinions and requests to Manufacturer
Charging Indicator Lamp should be on OnOff switch.
View detail
Adapter with RamMount1 inchBall
Installed by drilling holes in Upper Cowl Bracket and using Ram Mount
I don't think it is suitable for people who find it a little difficult because of the drilling process required, or for those who are not comfortable with drilling holes in Motorcycle.
Bolt can be fixed, so it can be fixed firmly.
View detail
Great build! Sturdy!!!!!!! But you have to get your own Rubber or you will Gap!!!!
As the title says. The build quality is great, but you have to prepare the rubber yourself (it deteriorates over time and must be replaced every year).
Gap falls off fast if you don't wrap it lol I wish it came with Rubber… The build quality is great!
View detail
I would choose the phone.
I bought it because it is famous. I am not worried about it falling because it is firmly fixed.
However, due to its shape, there is a possibility that the button on the phone may hit the device, and while the Xperia5 had no problem, the AQUOS WISH had a button problem. Before purchasing, please pay attention to the position of the button on your phone.
View detail