Reviews
Fits: DUCATI Panigale 1199/1098(rear)/1198/STREETFIGHTER1198/Deer Bell MULTISTRADA 1000DS1200 MONSTER S21200/Setc., DUCATI Panigale 1199/1098(rear)/1198/Streetfighter 1198/Diavel Multistrada 1200 Monster 1200/S etc., DUCATI Panigale 1199/1098(rear)/1198/Streetfighter 1198/Diavel Multistrada 1200 Monster 1200/S etc.
I purchased for MULTISTRADA1200. Since conversion of an adapters only removes an E ring, it is easy. The accuracy of a main part is good and the stand-up can be stabilized perfectly, so it is good. Since it is a little expensive, a one-star minus, but the
I purchased for MULTISTRADA1200. Since conversion of an adapters only removes an E ring, it is easy. The accuracy of a main part is good and the stand-up can be stabilized perfectly, so it is good. Since it is a little expensive, a one-star minus, but the overall user-friendliness will be five stars. View detail
In order to use it in CB400SF of the preceding car, it purchased separately. If it has even L receptacle, it should be able to correspond to any motorcycles. I think the kana in which some hangs are merely compared with V receptacle. Even when
In order to use it in CB400SF of the preceding car, it purchased separately.
If it has even L receptacle, it should be able to correspond to any motorcycles.
I think the kana in which some hangs are merely compared with V receptacle.
Even when a car body is somewhat slanting in case of V receptacle, a receptacle sometimes separates [ seldom ], but since it will separate in case of L receptacle if a car body is not made vertical, by the vehicle type which does not have a handle in rear parts, such as SS, I think that it is very hard to do.
View detail
The type which receives a swing arm with a rubber was used until now [ [Webike-monitor] ]. Compared with it, it is preeminent for the sense of stability under maintenance. When it was a rubber type, a swing arm was slippery and was not stabilized.
The type which receives a swing arm with a rubber was used until now [ [Webike-monitor] ].
Compared with it, it is preeminent for the sense of stability under maintenance.
When it was a rubber type, a swing arm was slippery and was not stabilized.
However, at the point of V character, when raising a stand, it must be careful so that a swing arm may not be damaged.
After I stretch a gummed cloth tape and recuperate myself, I am using it.
View detail
Fits: DUCATI MULTISTRADA 1000DS 1000, DUCATI STREETFIGHTER848, DUCATI MONSTER796, DUCATI Multistrada 1100/S, DUCATI MONSTER1100EVO, DUCATI HYPERSTRADA, DUCATI MONSTER1100/S, DUCATI HYPERMOTARD796, DUCATI 996, DUCATI 998, DUCATI 848, DUCATI 916, DUCATI 748, DUCATI 748, DUCATI 848, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI HYPERMOTARD796, DUCATI HYPERSTRADA
It purchases to MONSTER1100S. (required for JT-136RD use) It is just fit and safe!
It purchases to MONSTER1100S.
(required for JT-136RD use) It is just fit and safe!
View detail
-- J trip [ ] -- it is purchase in order for the stand to be under use for the first time and to use it by CRM250R which is not opening a hole to an axle shaft. lift up of the shaft is put in and carried out to an axle shaft -- -- when L receptacle
-- J trip [ ] -- it is purchase in order for the stand to be under use for the first time and to use it by CRM250R which is not opening a hole to an axle shaft.
lift up of the shaft is put in and carried out to an axle shaft -- -- when L receptacle is used compared with the stand for the first time, it applies to the stability after the time of lift up, and lift up.
It is whether to topple a motorcycle, if how which having used twists uses it although the direction which is used to stand credit by racing stands etc. will probably be satisfactory ...
It is safer for it to be satisfactory if it is a chain maintenance grade, but to fix separately, when doing the work which requires power.
(It became that it is actually likely to push down several times) Maintenance stands have been separately purchased as an object for CRM250R after all.
although it will be satisfactory if it works carefully -- -- rather than there is nothing -- Massey -- since it was moved by the thing, they are two stars.
View detail
V receptacle type is used, and it fails once, and is car-body BOTEGOKE ... and -- although he got the jitters and it was not working in one person -- an acquaintance's recommendation -- this -- it is surprise although the receptacle was purchased for
V receptacle type is used, and it fails once, and is car-body BOTEGOKE ...
and -- although he got the jitters and it was not working in one person -- an acquaintance's recommendation -- this -- it is surprise although the receptacle was purchased for the first time.
The lift up of the large-sized motorcycle can be easily carried out at least to it is the bicycle ? completely.
Since a rubber is among interference faces with 笙ェ笙ェ swing arm which is upset at a garage and which was able to carry out risk aversion firmly, a wound is likely to enter strangely or it does not seem to be ^^ This can carry out a recommend truly!
View detail
Although it said since it is easy and this stand had been used, having bought it, before 5 times could be found, since the shaft had bent, it re-purchased only the shaft. I want you to improve durability more.
Although it said since it is easy and this stand had been used, having bought it, before 5 times could be found, since the shaft had bent, it re-purchased only the shaft.
I want you to improve durability more.
View detail
Although V receptacle was used, the normal rear axle shaft was written at the hollow chromoly shaft, popularity was won for the first time, and the set was purchased. Incidentally, since a shaft does not penetrate, the axle shaft of normal is attentio
Although V receptacle was used, the normal rear axle shaft was written at the hollow chromoly shaft, popularity was won for the first time, and the set was purchased.
Incidentally, since a shaft does not penetrate, the axle shaft of normal is attention.
It is light although it was used instantly... The lift up of the 1200-cc car body [ 200-K ] can be truly carried out in about the same lightness as a mothers' bicycle.
there being sense of security farther than V receptacle, and saying -- it is -- once [ * ], if it is used, this cannot be stopped.
exchanging for V receptacle, when taking a rear wheel into pieces in my case -- daily use -- this -- popularity was won for the first time, and it came out, and is using it.
It is quite a recommend.
View detail
Although lift up of in the case of usual drive chain lubrication was carried out to the axle shaft of the stand for the first time by the set of the type which lets an axis pass, L receptacle set was purchased in advance of chain exchange this time. (
Although lift up of in the case of usual drive chain lubrication was carried out to the axle shaft of the stand for the first time by the set of the type which lets an axis pass, L receptacle set was purchased in advance of chain exchange this time.
(since it was a little uneasy independently on the occasion of a lift although it had a cylindrical standard receptacle made of a rubber) Compared with a standard receptacle, a lift can be carried out safely far.
It is regrettable that stand standard set sale of the L receptacle was not carried out those days I purchased the stand main part.
Since it was more expensive, it was considered as evaluation of three stars.
View detail
Fits: DUCATI MULTISTRADA 1000DS 1000, DUCATI STREETFIGHTER848, DUCATI MONSTER796, DUCATI Multistrada 1100/S, DUCATI MONSTER1100EVO, DUCATI HYPERSTRADA, DUCATI MONSTER1100/S, DUCATI HYPERMOTARD796, DUCATI 996, DUCATI 998, DUCATI 848, DUCATI 916, DUCATI 748, DUCATI 748, DUCATI 848, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI HYPERMOTARD796, DUCATI HYPERSTRADA
In using cantilever stand JT-136, they are indispensable parts. Although collected into the column corresponding to a vehicle type with the grade, I correspond also to Monster S4R.
In using cantilever stand JT-136, they are indispensable parts.
Although collected into the column corresponding to a vehicle type with the grade, I correspond also to Monster S4R.
View detail
It purchased together with the stand for the first time. For the first time, since it is troublesome to remove a surroundings check pin usually although it lets an axis pass to an axle shaft, the stand is found useful. For the moment, there are no
It purchased together with the stand for the first time.
For the first time, since it is troublesome to remove a surroundings check pin usually although it lets an axis pass to an axle shaft, the stand is found useful.
For the moment, there are no omission and it can use satisfactorily.
View detail
Fits: DUCATI MULTISTRADA 1000DS 1000, DUCATI STREETFIGHTER848, DUCATI MONSTER796, DUCATI Multistrada 1100/S, DUCATI MONSTER1100EVO, DUCATI HYPERSTRADA, DUCATI MONSTER1100/S, DUCATI HYPERMOTARD796, DUCATI 996, DUCATI 998, DUCATI 848, DUCATI 916, DUCATI 748, DUCATI 748, DUCATI 848, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI HYPERMOTARD796, DUCATI HYPERSTRADA
Perfect to S2R1000! With [ it plays and ] none of most wobbles!
Perfect to S2R1000! With [ it plays and ] none of most wobbles! View detail
Since the rear shaft was using it for Ducati in the air until now, the shaft type was used, but since it needed to be used for a wife's motorcycle, L receptacle was purchased. Although it was trustworthy that the shaft type of the possibility of an ac
Since the rear shaft was using it for Ducati in the air until now, the shaft type was used, but since it needed to be used for a wife's motorcycle, L receptacle was purchased.
Although it was trustworthy that the shaft type of the possibility of an accident is lower, the raw material on which it is hard to slide is used, and it was able to use, without becoming so nervous.
That L receptacle rotates also has the expensive point.
It is a recommend also in the unfamiliar one.
View detail
Although the standard receptacle was used for some time, if L receptacle set purchase is carried out lately and it is used, the L receptacle here is clearly easier-to-use. It is a recommend here and there [ first ]. The vehicle type incidentally u
Although the standard receptacle was used for some time, if L receptacle set purchase is carried out lately and it is used, the L receptacle here is clearly easier-to-use.
It is a recommend here and there [ first ].
The vehicle type incidentally used mainly is a zephyr.
View detail
Fits: DUCATI MULTISTRADA 1000DS 1000, DUCATI STREETFIGHTER848, DUCATI MONSTER796, DUCATI Multistrada 1100/S, DUCATI MONSTER1100EVO, DUCATI HYPERSTRADA, DUCATI MONSTER1100/S, DUCATI HYPERMOTARD796, DUCATI 996, DUCATI 998, DUCATI 848, DUCATI 916, DUCATI 748, DUCATI 748, DUCATI 848, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI HYPERMOTARD796, DUCATI HYPERSTRADA
It purchased to Ducati 1098. It purchased simultaneously with a stand main part. I think that attachment was also easy and did not take 1 minute. However, it is a difficulty that a shaft is still a large sum (10,290 yen)! That's right since it
It purchased to Ducati 1098.
It purchased simultaneously with a stand main part.
I think that attachment was also easy and did not take 1 minute.
However, it is a difficulty that a shaft is still a large sum (10,290 yen)! That's right since it cannot decide on a mass production method when it asks a manufacturer.
It is a wish, so become the same price as a shaft besides early!
View detail
Fits: HONDA VFR750F, HONDA RVF750, HONDA VFR400R, HONDA RVF400, HONDA NSR250R, BMW F800S, HONDA RVF400, HONDA RVF750, HONDA RVF400, HONDA RVF750
Although purchased simultaneously with a stand main part, it worried for several minutes in what should just equip what kind of wind with this shaft. It would be easy and I would like you to give illustration explanation by that which is said. In
Although purchased simultaneously with a stand main part, it worried for several minutes in what should just equip what kind of wind with this shaft.
It would be easy and I would like you to give illustration explanation by that which is said.
In addition, the shaft of a difficulty is big-ticket.
If it thinks by shaft cost total although the stand itself is not so expensive, does it waver to purchase?
View detail
Although CBR and XR are owned, in CBR, it is a hook bolt +V receptacle. It purchases to XR which cannot perform attachment of a hook bolt. It is raised lightly, without damaging a swing arm. It is kind to chain maintenance etc. For those b
Although CBR and XR are owned, in CBR, it is a hook bolt +V receptacle.
It purchases to XR which cannot perform attachment of a hook bolt.
It is raised lightly, without damaging a swing arm.
It is kind to chain maintenance etc.
For those by whom it is used by two or more vehicle types, it is recommended.
View detail