Reviews
Fits: DUCATI Monster 821, DUCATI Monster 797, DUCATI Monster 1200, DUCATI SUPERSPORT 950, DUCATI SUPERSPORT 950S, DUCATI SUPERSPORT 939S, DUCATI SUPERSPORT 939, DUCATI Monster 1200S
It took a lot of work, but Parenthesis is great!
The M821 has a complete design including the Rear Fender, but I still want to make it a Fender Eliminator and have it Refreshing! I bought it because I thought it would be a good idea.
The installation itself was easy, but there were a few troublesome parts that took longer than expected.
I had a hard time 1. removing the pure normal thread screw in the bracket of the blinker and 2. screwing the body of the Fender Eliminator onto the body. I think we can proceed.
Also note that drilling is required when using OEM License Plate Bracket.
View detail
be stooped
The look is quite different compared to OEMFender. You will also feel a strong sense of satisfaction.
I think it is a good idea to check if the included ShortParts are sufficient for the job. I had to run to a hardware store because I was missing the nut that is used to hold the License Plate Bolt. The instruction manual says Original Nut" Original Washer It was stated.
The installation can be done according to the Instruction Manual without any difficulties. However, since the Instruction Manual does not mention how to remove the OEM parts, it is better to check the Service Manual. I was not sure and had to remove the Rivet in order to remove the OEM reflector, but in fact, I was able to crack the Fender without disassembling the Rivet. (Sweat)
The Locktite and Hex wrench were originally owned, and the Hex lobe wrench was bought for the need for T10 and T20.
View detail
Fits: DUCATI HYPERMOTARD1100/S, DUCATI Hypermotard796, DUCATI Hypermotard821, DUCATI HYPERSTRADA, DUCATI MONSTER1000, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER750, DUCATI MONSTER800, DUCATI MONSTER900, DUCATI GT1000, DUCATI SPORT1000, DUCATI MONSTER S4, DUCATI SCRAMBLER, DUCATI Monster 821, DUCATI Monster 1200, DUCATI 796, DUCATI 696, DUCATI 1100
This sounds good
In terms of Position, it would be nice if it was a little further back and a little higher up, but not enough to put on Rear Sets.
There is no need to modify either the body or the parts for installation, so the work itself is not too difficult. The tools required were Hex, Pliers, Plastic Hammer, and Snap Ring Pliers.
Also, you will need a screw lock, which is not included in the kit, so you will need to prepare it.
View detail
![[Repair Parts] Triangle Mark Plate](https://img.webike-cdn.net/catalogue/images/27067/flu_s17_01_TS.jpg)
When you have bored up your moped 1 or for International Model moped 2.
The Australia Post Spec. CT110 HUNTER CUB does not have this mark, and I thought it would be better to have it. I bought it and installed it. It was easy to install and looks fine. I think the angle can be adjusted because it can be bent a little. View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
Convenient
I use it on my ninja1000sx. I have short legs and the bar that pays with the OEMSTAND leg is too short, so it was very difficult to raise and lower the Side Stand. With this product installed, it was very easy to raise and lower the Side Stand. It was a good purchase. View detail
Fits: DUCATI 1199Panigale, DUCATI 959Panigale, DUCATI 899Panigale, DUCATI 1299Panigale, DUCATI PANIGALE V2
OK with lower price than other manufacturers
It is from several companies, but the price is a little cheap, and because it seems to be functional, I bought Black of the same color as the surrounding Cover and put it on at the time of delivery.
Personally, I think that the Core guard is cheap enough because I think that every manufacturer is without the color of Stainless or Black and PunchingDesign is only slightly different, and the performance is almost the same.
I like the look and feel of this product. I think it's OK to focus on price and function because it's a world of self-satisfaction that you can't understand unless you look into it.
View detail
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
A DUCATI classic
I chose this because it is a standard DUCATIFender Eliminator. I think that there is no problem including the angle etc. though there is a slight difference from other manufacturers. I had it installed at the time of delivery this time.
When you install it by yourself, it is not difficult work if you refer to the Net video etc.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
I took it for granted, but …
DUCATI doesn't have a stick to make the side stand easier, which is common in Japanese cars.
It's hard to STAND.
Thanks to thisParts for the help.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
AGUSTA
It is hard to get the STAND out and the height of the motorcycle is high, so it is very safe after installation. View detail
Fits: DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER ICON
DucatiSCRAMBLER
I use the OEM License Plate Light, but it is not Stylish. The mounting bracket is Quantity:Pair (for Left and Right) I'm not happy that they are separate and hard to match. View detail
DUKE390 Fender Eliminator
There are a lot of Fender Eliminator for DUKE390 current model, but I decided to use MotoCRAZY after a lot of consideration.
It is also the part that I liked very much because it feels like the most Number is directly attached, and I can choose two kinds of Number attachment angle in the law change from now on (Number fixed Frame is chosen either front or back).
View detail
Fits: DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD939
Rear fender-less for a more racy look
It is Moto Crazy's Fender Eliminator for Ducati, I used it for MONSTER1100evo, it is also good for HYPERMOTARD821, and it refreshing the rear very much. The price is cheap, and it is preeminent coolness thanks to the composition of the Parts of the minimum necessary for me personally. View detail
Fits: KTM 125DUKE, KTM RC125, KTM 200DUKE, KTM RC200, KTM 250DUKE, KTM RC250, KTM 390DUKE, KTM RC390
Same as Film on your phone.
It's a Film just like the Film on your phone.
But it's not GlassFilm, so it's what we call a PelePera.
It is possible to install it easily if you pay attention only to the pasting position a little.
I'm almost certain that the Meter won't get damaged, but I put it on just in case.
View detail
Fits: DUCATI Streetfighter S, DUCATI Streetfighter, DUCATI STREETFIGHTER848, DUCATI Streetfighter S, DUCATI Streetfighter, DUCATI STREETFIGHTER848
Large sturdy if you look at the Instruction Manual properly.
AssemblyInstruction Manual is included and it was relatively easy to replace the OEM Blinker.
LED Sequential Blinker (Rizoma (Part Number)):(FR130B)), I had considerable difficulty in replacing it.
The cord storage space is too small and the cords for attaching the resistors are too bulky to store.
So the resistor was connected to Front and somehow completed. But then...
When I assembled all of them, the license plate hid the blinker.
So furthermore, Posh (POSH) I bought an extension bracket 40mm for sequential.
All redone. I enjoyed it for a few days.
View detail
Fits: DUCATI PAUL SMART1000LE, DUCATI SPORT1000, DUCATI GT1000, DUCATI SPORT1000, DUCATI GT1000, DUCATI SPORT1000
Refreshing around the rear!
Although it is not written in the manual, I think that it takes a little time for a beginner because there is an installation order. I think that it is somewhat easy to assemble if you fix the back part that cannot be retightened afterwards first, and proceed with the temporary tightening of the others.
The workmanship is not bad for the price, and Refreshing around the Rear.
View detail
Fits: DUCATI MONSTER 1200S, DUCATI MONSTER 1200, DUCATI MONSTER 1200R
They're doing a great job
I purchased this product because of its cost effectiveness No holes were not aligned or otherwise inaccurate when installed, and they are still in place after driving The MONSTER S21200 series received Garbage Be careful not to crush the Core when you install the Radiator because it is curved You need to put it on View detail
Fits: KTM 125DUKE, KTM RC125, KTM 200DUKE, KTM RC200, KTM 250DUKE, KTM RC250, KTM 390DUKE, KTM RC390
The corners turn up
I use it with 125DUKE
On days when the wind is low and Dust is hard to dance around, wipe it clean with a Parts cleaner and let it dry before I put it on, and while it was good right after I put it on, I'm doing a test run on another Custom The corners came off after a few hours or so It's just the corners, so I'm leaving it on, but it could be a little more adhesive
It is a protective film, so it is good as long as it is covered
Like when I failed to paste a phone Film, only around the edges, making it difficult for Meter to be visible It's not peeling off to the part, so I'm going to test how long it will last
View detail
Fits: DUCATI 899Panigale, DUCATI 959Panigale, DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 899Panigale, DUCATI 959Panigale, DUCATI 1299Panigale, DUCATI 1199Panigale
Cost-effective!
Many external for vehicles are expensive, using imported products and carbon parts, but I have no complaints with this one The Panigale is a Tail Lamp and Blinker in one piece, and the BlinkerLight is The type that doesn't protrude from the body is popular, but I'm using the LED type of OEM It is very Compact and does not interfere with the body design It is very Compact and does not interfere with the body design I think it's safer because it's easier to check than it is to check the Number angle and the quality Not bad
It's a good costumer!
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
It's seriously useful!
I installed it on a Monster1200s 2020
When you put this on, it becomes very easy to put out the Side Stand
Pretty much the Parts of Recommendation!
View detail
Fits: DUCATI MONSTER 1200S, DUCATI MONSTER 1200, DUCATI MONSTER 1200R
It's so upscale!
I put it on my 2020 Monster1200s!
I asked the Shop to install it
This will protect the Radiator core!
I'm happy with the way it looks!
View detail