Reviews
The flag of Japan is my favorite.
It is a good Size to put next to Screen.
I had a hard time transferring it because I put it on when the temperature was low.
Usually, I think it can be applied immediately.
View detail
A-TECH Earplugs
At a quick glance, the texture is no different from TRI*ST*R and this Slider.
The packaging is insanely kind, protecting the Screw part with Tape to prevent Garbage, etc. from sticking to it.
StickerQuantity as a bonus:1 Set of 2pc.
Just in time for earplugs, man! (This product is HookSlider. Good kids don't copy it!)
View detail
Radiator core guard protection
I'm posting this because there were no impressions yet. The manual is not included, but it was easy to do. I think it is better to install from the oil cooler side first. The large size is very satisfactory. View detail
Stand hook slider
The gold and plastic parts are not crimped on one side, so it turns round and round, but it is still usable. View detail
Carbon is still good for Parenthesis.
Purchased this product to be able to handle the next time my Motorcycle was almost buried when parked on gravel.
I could have just put down a board, but I found this product anyway and bought it because of its coolness.
It is smaller in size than I imagined, but on the other hand, it is a convenient size for carrying around, so I am glad.
It has a hole at the end and can be carried like a Key Holder.
It worked well as Side Stand Support.
Included Parts:a ring that can be used as a Key Holder? The delivery time was indicated as 6 months, but it took about a month to arrive. It took about one month to receive it, although the delivery time was indicated as 6 months.
Carbon cool, so if you like the way it looks, buy it!
View detail
attachment
Installation was more difficult than expected. The shape is slightly different from OEM. View detail
Is this a guarantee of conformity?
What is the conformity guarantee for this product?
Made by A-TECH yzf -r1 4xv Fender Eliminator cannot be installed, but I was prepared to have to do some modification, but there are some parts (distortion, etc.) that cannot be modified due to the specifications other than those shown in the photos.
View detail
It was good
I am still using it at this point while Repairing it, but I wanted to buy it while I could get a new one!
The Motorcycle is currently in hibernation, so we will not be able to make an Impression etc. until after it is installed in the early spring.
The reason why I chose to have the effect is because I have chosen to use Twill Weave Carbon, and my mood is reflected in the Large portion of the effect. (Lol)
View detail
Quality not commensurate with price
To be honest, I can't say that the QUALITY is commensurate with the price.
The Screw holes do not match and the Bolt that comes with it is obviously too short.
The screw holes were not aligned, so I installed it forcibly, and the Crack was easily inserted.
Well, it is a handmade product, so accuracy may not be a problem, but I thought I would never buy A-TECH's parts again.
View detail
The atmosphere changes considerably.
STD Shape is good, but it's nice to have Arrangement as effective as this! It's presence is unbelievable.
If only we could manage the delivery date.
View detail
Isn't the error too Large?
The mounting holes did not fit at all, requiring considerable modification.
Seat baseRight rear hole extended to the Level where Washer is not available.
Therefore, I have been pondering various methods of fixing Bolt.
The base of the pedestal must also be machined considerably, or the load on the Seat Cowl will be Large and I think it will crack eventually.
I think it will be very scratchy, so if you can't separate the two, it is safer not to do it.
View detail
CBR1000RR-R SP Slider
When I received the product, I thought it was too large and the design was not so good.
Once installed, it fits the car body and is quite good.
View detail
Large is Small in size but
The best part is the use of Carbon.
It is much smaller than most vessels (about half the size of a mosquito coil), but I think it would look good as a mere ornament.
One point. It is so light that I worry if the vessel will move in the wind.
View detail
Cannot be pontoon-mounted.
The design is excellent, but installation requires shaving the body and widening the holes to fit the car.
This time it is Carbon, but the FRP one I bought before could not be pontooned.
It is an Exclusive Design product and not a cheap one at that, so I wish they would think a little more about it.
View detail
Fits: KAWASAKI Ninja 250
Parenthesis is great! Quick fastener is the best!
First of all, I chose to purchase this product because I wanted to make something that no one else would wear and Parenthesis looked good! I chose this product because I wanted something that no one else would wear. This product is made-to-order, so when I ordered it, the delivery time was supposed to be about 6 months, but I was surprised to find out that it actually arrived about 4 months early! ninja400 (ex400g) I installed the bracket on the front cowl of my car, but the front cowl stay seemed to interfere with the front cowl and would not fit properly, so I dropped off a used bracket at an auction site and cut it down to use it. (If I do it right, will I get hooked?) Although it is less strong, it is good because it can be attached and detached without stress. (to be reinforced later)
A quick fastener is also included for immediate maintenance.
Also, in my case, it is intended for public road use, and this product is made for Race, such as Light, Blinker, STAND, etc., so I have to modify it by myself in various ways.
This product seems to be basically for people who install it while processing it themselves, so if you're not very good at it, get a Shop or someone knowledgeable to do it for you!
Good points
Cool! (Cowl shape is different from OEM)
Air duct is attached. (Parts sold separately are required.)
The quick fastener makes maintenance easy.
Handlebar can be lowered and placed under the Top Bridge. (I use sniper Separate Handlebars sold separately, OEM Handlebar not tested)
It looks like a works machine because it has an Under Cowl.
XX Bad Points
Processing is required due to a certain amount of BALI.
RearCowl, Screen, Meter Pedestal, and Air duct sold separately
There are various places of interference when installed as OEM. (It's for Race, so it can't be helped.)
I feel like I've said a lot of things I want to say, but in closing, since this is a made-to-order product, A-Tech and Webig worked well together in confirming delivery dates, answering questions, and handling additional processing, and they responded smoothly.
View detail
My Motorcycle!
At first, I thought that some modification would be required for installation, but it is almost the same as OEMParts!
The work took about 10 minutes One Side, was well packaged, and the items themselves seemed to do a good job.
View detail
It is the best texture
I purchased the Dry carbonMODEL. It took about half a year for delivery, but the quality of the product is excellent, as expected from A-TECH, and it is very beautiful. Compared to normal fenders, it is very lightweight and the shape is very parenthesis. View detail
Quantity:Pair (for Left and Right) The design of the "M" is excellent!
There are well-designed Fenders from other manufacturers, but Quantity:Pair (for Left and Right) This is the only design that can cover up to the Swing Arm of the
The delivery time was six months, but I had waited eight months before, so I was prepared for that, but it was delivered in one month!
Parts accuracy is also fine and can be installed in less than 5 minutes.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
A-TECHG-Guard
I installed it on my GSX1300R HAYABUSA just in case. It is a product that I do not want to be indebted to. View detail
![[G310SS] Complete Kit for Race](https://img.webike-cdn.net/catalogue/images/58717/BM31175_01_TS.jpg)
BMW G310RFull Cowl for Race
Design with S1000RR as Motif is Parenthesis good.
The top speed, which is comparable to the non-cowl G310R with matching fuel condition, is considered to have good aerodynamic characteristics.
Of course, it is also good where the Style is different from NORMAL.
The feel of the ride is also different.
However, there is no detailed instruction manual on how to install the bracket, and the Upper Cowl Bracket is particularly difficult to install.
If you are not confident, you should ask Shop for help.
View detail