Reviews
Tail Bulb replacement for KSR's Fender Eliminator Kit
I purchased a used KSR80, but the previous owner installed a Fender Eliminator Kit, and the tail lamp is a Lucas type.
There was a Trouble with Tail Bulb immediately after purchase.
I removed the Lens to see the model of the Lamp to replace it, but unlike the usual Double Bulb, the head was a Small Rhinoceros Bulb.
This Type was not sold at Home center or Car Shop 。 Maybe MotorcycleParts specialty stores have them, but I can't find any near me. 。
However, because the length of the Tail Bulb was different, it interfered with the Lens, causing the Lens to chip, melt, and consume more power due to its higher wattage.
I had put it off because it was inexpensive but the shipping and other things made it needlessly expensive, but I had some shopping to do at WeBig, so I bought it as a package deal.
After installation, there was no interference (obviously), and since the Watt number was lowered, the power consumption was also lowered, eliminating the concern factor.
I am planning to eventually switch to LEDs, but there is a barrier of full-wave rectification, so I may end up putting it off.
View detail
Fits: MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, KAWASAKI KLX250, KAWASAKI GPZ400, SUZUKI volty, SUZUKI volty, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, SUZUKI DF200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XZ550, YAMAHA XZ400
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
JAPAN's peace of mind!
I used it for a Blinker Bulb and installed it to save a little power since I am adding Motorcycle navigator, USB, Fog Lamp, etc. I am happy that it is 40% brighter than OEM and saves electricity! View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Low cost Low Bright
To be honest, the brightness is not enough at all. However, if you want a LED light that shines white, this product is a good choice because of its low price and easy installation. If you need brightness for touring, this product is not reliable. It will be difficult to drive at night in places with poor street lighting, especially in bad weather. Especially in bad weather. But it is cheap! Easy installation is excellent. View detail
Privileges of old cars
I have been interested in Yellow Bulb for a long time. I chose this one because I wanted to get a k true Yellow color anyway, and it is expensive. The price is expensive, but I checked the brightness on Tunnel and it is better than OEM.
Privilege of an old car?Does it stand out?
View detail
Fits: HONDA CREA SCOOPY, HONDA CREA SCOOPYi, HONDA GIORNO CREA, HONDA SMART DIO, HONDA SMART DIODX, HONDA SMART DIOZ4, HONDA DIO, HONDA DIOZ4, HONDA DIO, HONDA LEAD50, HONDA SPACY100, HONDA LEAD 100, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, YAMAHA JOGDELUXE, YAMAHA JOG, HONDA DIOSP, HONDA DIO-ZX, HONDA DIOS, HONDA DIOJ
YamahaJOG (AY-01, 2018) Replacement HeadValve
Valve replacement is easy. However, I had to be careful not to break my fingernail when removing the headlight cowl cover−. I think the 4500K color tone is more visible and easier to see in the rain and at night, so I would like to see it added to the lineup. View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
After cutting, I put it in.
I removed 3−4mm from the last conical section to avoid putting it in Original's Light. Glass is still touching, I think 5mm is better.
Socket fits, brighter than OEM, light flickers while idling.
View detail
Not too bright, not too dark.
Purchased because the light bulb on my moped was out.
It is yellowish compared to normal light, but that is not a problem.
It is not bright, but I think it is acceptable because I can see normally on the street at night.
Also, I believe that this is the way it is because this is the color of the OEM.
View detail
Fits: HONDA CBX750F, HONDA PS250, HONDA VFR400K/Z, KYMCO B&W250, KYMCO CARO2, KYMCO KCR125, KYMCO SUPER9 50, KYMCO VITALITY 50, その他 , HONDA Rebel (-1999), YAMAHA VOX, YAMAHA FZR750, SYM Wolf Classic, SUZUKI RH250, SUZUKI RA125, MALAGUTI PassWord250, PIAGGIO ICE50, HONDA SPACY125, HONDA CS250SE, HONDA XLR250
Light intensity is low.
Used for FZ750. The light intensity is that of a typical Halogen bulb. Level is not so bright to be honest.
However, since the car Both Sides is old (Harness has not been replaced yet), we do not know what really happened.
This may also be a problem with the car Both Sides, but the Filament breaks periodically and the life span is not very long.
View detail
[Text completion] It purchases to LED-ization of a number lamp. Although I thought that there was no color also blue, there was nothing also yellow, and you could shine snow-white, light did not become bright only by carrying out [ spread ] Pons attac
[Text completion] It purchases to LED-ization of a number lamp.
Although I thought that there was no color also blue, there was nothing also yellow, and you could shine snow-white, light did not become bright only by carrying out [ spread ] Pons attachment than expected, so that there is no number in a direction of radiation and it expected also by 3LED.
It seems that it is important in order for using for a place which illuminates the direction of a tip of an electric lamp in spot to demonstrate real value since it became bright when the reflector was made and adjusted.
View detail
Since power dissipation was small, it expected to be connected with derating of a battery and purchased.
Since power dissipation was small, it expected to be connected with derating of a battery and purchased. View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Wish it was a little brighter.
Reasonable brightness for a moped.
PlusOnHigh beam feels subtle and dark underfoot and in the distance.
Low beam light distribution was good.
View detail
It's a bit expensive
I think this price is a bit high for Valve, but it's cheaper than OEM and I don't blame them. It lights up fine, but I'm not sure how durable it is. View detail
it is normal
Product Name
M&H Pine Stripe MAnd H Pine Stripe Double Base Bulb S25 BAY15D
Item Number
1P3407C
Vehicles
DREAM110
Number of man-hours
Around 5 minutes
Why did you choose this product?
I bought this as a for repair because my Tail lamp was out.
The reason why I chose it is that it is inexpensive, which is a Large reason.
I decided to use regular bulbs because it was not worth it to replace them so many times when I changed to LEDs.
Impressions after using it
You can definitely use it and it will light up if the Size compatibility with the vehicle is not wrong.
If it does not light up, it is likely that you bought the wrong product or the product Body is defective.
The product I bought worked fine for both the tail light and Brake light, so the vehicle was repaired without any problems.
▼ Attention
Size and Type vary from vehicle to vehicle, so you need to research before you buy.
View detail
I'm doing my job reasonably well.
I bought this as a consumable for my TLR200. This is a Type bulb, which is not seen anymore, but bought for fitment.
After all, it is dark because there is no illumination, but it is enough.
View detail
I'm doing my job reasonably well.
I bought this because my stop light bulb was out. Replacement was very easy and only required a Phillips head screwdriver. I have no complaints if it is durable. View detail
Brighter than you can imagine
[How is it used?
Used as Indicator sphere for OEMMeter
Was the one you received as per Image?
When I turned it on, it was much brighter than I imagined.
Was the installation difficult?
Not difficult, but the access to the Meter Bulb is quite large and strange.
How was your experience with it?
Good visibility … even in daylight, but glaring at night! (especially Blue)
After all, from the top of Lamp. [Color] Coping by applying Smoke
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Too bright … But I think this is a mistake of my own choice since it is for Indicator use.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
LEDs are polarized, so once installed, check the lights before reassembling! If it does not turn on, just plug it in the other way and it should be OK.
View detail
Fits: Others
If power saving is your goal, then yes.
Bought this to replace a Meter Bulb that was out.
There is a light at the top of the meter, so the bottom is dark, and I expected it to be brighter, but there was no Large difference.
If you look into the mounting part of the Lamp, you can certainly see the difference in brightness, but I guess that LED is not that diffuse.
When viewed from the actual driving position, the LED feels slightly brighter when compared closely.
Maybe it's different if the board is transparent….
However, because the OEM bulb is 0.5w (from the product Page of M&Hatsu Stripe) against 3.4w here, if I convert it to LED together with Indicator etc., it seems that power saving can be done to that extent.
View detail
Fits: HONDA CBX750F, HONDA PS250, HONDA VFR400K/Z, KYMCO B&W250, KYMCO CARO2, KYMCO KCR125, KYMCO SUPER9 50, KYMCO VITALITY 50, その他 , HONDA Rebel (-1999), YAMAHA VOX, YAMAHA FZR750, SYM Wolf Classic, SUZUKI RH250, SUZUKI RA125, MALAGUTI PassWord250, PIAGGIO ICE50, HONDA SPACY125, HONDA CS250SE, HONDA XLR250
I've never run out of balls before.
HS1/H4 35W/35W Item Number:16AH B2C
About 10,000km 10 months on KLX125
I've used over 30 of these Manufacturer's in my life, including other cars, but this is the first time I've run out of balls.
Also, other models of cars, and summer use, in recent years, there has been a problem with the trouble of the headlight receiver melting due to heat generation.
I used HiBeam to lower the optical axis, but it has a negative effect on safety as well as night driving.
I am considering buying from another Manufacturer as reliability is a key component.
View detail
photo fraud
I bought it because my tail lamp was out
First of all, there is nothing wrong with the product itself
I know I'm 100 percent wrong, but look at the Top image and see the Large Threshold Size Tail If you can buy a lamp
I misunderstood In fact, it is Small size which is pictured in the image Right Side, and it is attached to the tail lamp I can't
We strongly request that you switch to using Single Item images
View detail